Hledat
Zobrazují se záznamy 1-10 z 20
Vliv deformace na precipitační procesy v komerčních Al slitinách s přídavkem Sc a Zr
Influence of deformation on precipitation processes in commercial Al-based alloys with Sc,Zr-addition
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Vlach, Martin
Datum publikování: 2019
Datum obhajoby: 12. 09. 2019
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: 1 Abstrakt: Byly studovány mechanické a tepelné vlastnosti slitin Al-5,4hm.%Zn-3,1hm.%Mg- 1,5hm.%Cu (AA-7075), Al-5,2hm.%Zn-3,0hm.%Mg-1,4hm.%Cu-0,2hm.%Sc-0,1hm.%Zr (AA-7075-ScZr) a Al-2,93hm.%Mg-0,34hm.%Mn-0,33hm.%Si-0,2 ...
1 Abstract: Mechanical and thermal properties of Al-5.4wt.%Zn-3.1wt.%Mg-1.5wt.%Cu (AA- 7075), Al-5.2wt.%Zn-3.0wt.%Mg-1.4wt.%Cu-0.2wt.%Sc-0.1wt.%Zr (AA-7075-ScZr) and Al-2.93wt.%Mg-0.34wt.%Mn-0.33wt.%Si-0.22wt.%Fe-0.19wt. ...
1 Abstract: Mechanical and thermal properties of Al-5.4wt.%Zn-3.1wt.%Mg-1.5wt.%Cu (AA- 7075), Al-5.2wt.%Zn-3.0wt.%Mg-1.4wt.%Cu-0.2wt.%Sc-0.1wt.%Zr (AA-7075-ScZr) and Al-2.93wt.%Mg-0.34wt.%Mn-0.33wt.%Si-0.22wt.%Fe-0.19wt. ...
Fázové transformace ve slitinách Mg-Gd
Phase transformations in Mg-Gd alloys
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Vlach, Martin
Datum publikování: 2011
Datum obhajoby: 13. 09. 2011
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: ývoj hořčíkový h slitin má ekonomi koEekologi ké opodst-tněníF yužití tě hto slitin je n- vzestupné tenden i - z-s-huje zejmén- do tr-nsportního pr·mysluD -le svoje upl-tnění n- hází i v medi íněF tedn- z metod zlepšení ...
Fázové transformace v technických slitinách na bázi Al
Phase transformations in technical Al-base alloys
Dizertační práce (OBHÁJENO)
Vedoucí práce: Stulíková, Ivana
Datum publikování: 2006
Datum obhajoby: 18. 09. 2006
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt nenalezen
Fázové transformace v biokompatibilních Mg-slitinách
Phase transformation in bio-compatible Mg-based alloys
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Vlach, Martin
Datum publikování: 2015
Datum obhajoby: 10. 09. 2015
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: ËÓÙ ×Ò Ñ Ø Ö ÐÓÚ Ú Þ ÙÑ ÔÓ Ö Ù Ú ÞÐ Ô ÓÚ Ò ÚÐ ×ØÒÓ×Ø Ð Ó ¹ ÓÚ ×Ð Ø Ò¸ Ø Ö Ñ ÖÓ ÚÝÙö Ø ¸ Þ Ñ Ò Ú ØÖ Ò×ÔÓÖØÒ Ñ ÔÖóÑÝ×ÐÙ Ú ÑÓ¹ ÖÒ Ñ Ò ž ËÐ Ø ÒÝ Ò Þ Å ¹Ê ¹Ë ¹ÅÒ ÐÞ ÔÓÚ öÓÚ Ø Þ Ú ÐÑ ×Ð Ò Ñ Ø ¹ Ö Ð ÔÖÓ ØÝØÓ ÔÐ ž Î Ô Ð Ò ÔÖ ÝÐ ...
ÙÖÖ ÒØ Ñ Ø Ö Ð Ö × Ö × Ó Ò Ò ÑÔÖÓÚ Ò Ú ÓÖ Ó Ð ØÛ Ø Ñ ¹ Ò × ÙÑ ÐÐÓÝ Û Ú Û Ù× ×Ô ÐÐÝ Ò ØÖ Ò×ÔÓÖØ Ò Ù×ØÖÝ Ò Ñ ¹ Ò ž Å ¹Ê ¹Ë ¹ÅÒ × ÐÐÓÝ× Ò ÓÒ× Ö × ÔÖÓÑ × Ò Ñ Ø Ö Ð ÓÖ Ø × ÔÔÐ Ø ÓÒמ ÁÒ Ø ÔÖ × ÒØ ÛÓÖ ¸ Ø Ö Û × ×ØÙ Ø ÖÑ Ð ÚÓÐÙØ ...
ÙÖÖ ÒØ Ñ Ø Ö Ð Ö × Ö × Ó Ò Ò ÑÔÖÓÚ Ò Ú ÓÖ Ó Ð ØÛ Ø Ñ ¹ Ò × ÙÑ ÐÐÓÝ Û Ú Û Ù× ×Ô ÐÐÝ Ò ØÖ Ò×ÔÓÖØ Ò Ù×ØÖÝ Ò Ñ ¹ Ò ž Å ¹Ê ¹Ë ¹ÅÒ × ÐÐÓÝ× Ò ÓÒ× Ö × ÔÖÓÑ × Ò Ñ Ø Ö Ð ÓÖ Ø × ÔÔÐ Ø ÓÒמ ÁÒ Ø ÔÖ × ÒØ ÛÓÖ ¸ Ø Ö Û × ×ØÙ Ø ÖÑ Ð ÚÓÐÙØ ...
Precipitační procesy v lehkých konstrukčních materiálech
Precipitation processes in light constructional alloys
Dizertační práce (OBHÁJENO)
Vedoucí práce: Stulíková, Ivana
Datum publikování: 2009
Datum obhajoby: 30. 09. 2009
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt nenalezen
Mechanické vlastnosti hydrogelů - srovnání měření modulu pružnosti pomocí DMA a AFM
Mechanical Properties of Hydrogels - Comparison between DMA and AFM Measurements of Elastic Modulus
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Valentová, Helena
Datum publikování: 2019
Datum obhajoby: 25. 06. 2019
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Polymerní hydrogely jsou zesíťované polymery, které jsou schopné do sebe absorbovat velké množství vody. Mají řadu využití v mnoha oblastech lidské činnosti - zejména v lékařství a diagnostice. Tato práce si klade za cíl ...
Polymer hydrogels consist of polymer network that is able to absorb large amount of water. They have plenty of real-life applications - for example in medicine and diagnostics. The aim of this thesis is to study elastic ...
Polymer hydrogels consist of polymer network that is able to absorb large amount of water. They have plenty of real-life applications - for example in medicine and diagnostics. The aim of this thesis is to study elastic ...
Studium fotodegradace piva metodou fluorescenční spektroskopie
Study of beer photodegradation by fluorescence spectroscopy
Diplomová práce (OBHÁJENO)
Vedoucí práce: Gabriel, Petr
Datum publikování: 2021
Datum obhajoby: 15. 09. 2021
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: V případě, že vystavíme pivo viditelnému světlu, dojde po čase k jeho světelnému poškození, které se vyznačuje nežádoucím zápachem a příchutí nápoje. Potvrzeným původcem výše zmíněné příchutě v pivu je 3-methyl-2-buten-1-thiol ...
If a beer is exposed to visible light, it will become light-damaged over time, which is characterised by an undesirable odour and flavour of the drink. The confirmed cause of the above-mentioned flavour in beer is ...
If a beer is exposed to visible light, it will become light-damaged over time, which is characterised by an undesirable odour and flavour of the drink. The confirmed cause of the above-mentioned flavour in beer is ...
Studium vybraných charakteristik hliníkových slitin s přídavkem Yb a Zr
Study of the selected properties of aluminium alloys with Yb and Zr addition
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Vlach, Martin
Datum publikování: 2021
Datum obhajoby: 08. 09. 2021
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Předkládaná práce se zabývá vlivem příměsí ytterbia, manganu a zirkonu ve slitinách AlYb a AlMnYbZr ve stavech po odlití, válcování za studena se stupněm deformace 40 a 70 % a po vysokoteplotním žíhání. Materiály byly ...
The presented thesis focuses on the effect of addition of ytterbium, manganese and zir- con in alloys AlYb and AlMnYbZr in the state as casted, cold rolled with the deformation degree of 40 % and 70 % and after high-temperature ...
The presented thesis focuses on the effect of addition of ytterbium, manganese and zir- con in alloys AlYb and AlMnYbZr in the state as casted, cold rolled with the deformation degree of 40 % and 70 % and after high-temperature ...
Fyzika pro (budoucí) mediky
Physics for (future) medics
Diplomová práce (OBHÁJENO)
Vedoucí práce: Kekule, Tomáš
Datum publikování: 2022
Datum obhajoby: 02. 09. 2022
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: This thesis covers several topics from physics which appear in typical medical school curriculum or which are required in order to study this type of schools. It is intended mainly for (future) medical school students. ...
Práce pokrývá několik fyzikálních témat, která se objevují ve výuce na lékařských fakultách anebo se při výuce rovnou předpokládá jejich znalost. Je určena zejména ucha- zečům o studium medicíny a mediky. Zpracování témat ...
Práce pokrývá několik fyzikálních témat, která se objevují ve výuce na lékařských fakultách anebo se při výuce rovnou předpokládá jejich znalost. Je určena zejména ucha- zečům o studium medicíny a mediky. Zpracování témat ...
Železnice ve výuce fyziky
Railways in physics education
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Kekule, Tomáš
Datum publikování: 2023
Datum obhajoby: 04. 09. 2023
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: The bachelor thesis presents railway phenomena and technical applications through grammar school physic. The underlying physical principles are easily visible to the ordinary eye when travelling by train. These phenomena ...
Bakalářská práce přibližuje železniční jevy a technická uplatnění středoškolskou fyzikou. Základem jsou fyzikální principy snadno viditelné běžným pohledem při cestování vlakem. Tyto jevy pak můžeme rozdělit na mechanické, ...
Bakalářská práce přibližuje železniční jevy a technická uplatnění středoškolskou fyzikou. Základem jsou fyzikální principy snadno viditelné běžným pohledem při cestování vlakem. Tyto jevy pak můžeme rozdělit na mechanické, ...