Chemické složení fotovoltaických panelů a jejich rizikovost
Chemical composition of photovoltaic panels and assessment of their environmental risks
diplomová práce (OBHÁJENO)
Zobrazit/ otevřít
Trvalý odkaz
http://hdl.handle.net/20.500.11956/92418Identifikátory
SIS: 168752
Kolekce
- Kvalifikační práce [20073]
Autor
Vedoucí práce
Oponent práce
Drahota, Petr
Fakulta / součást
Přírodovědecká fakulta
Obor
Geologie
Katedra / ústav / klinika
Laboratoře geologických ústavů
Datum obhajoby
19. 9. 2017
Nakladatel
Univerzita Karlova, Přírodovědecká fakultaJazyk
Čeština
Známka
Velmi dobře
Klíčová slova (česky)
fotovoltaický panel, chemické složení, extrakce, rizikovostKlíčová slova (anglicky)
photovoltaic panel, chemistry, extraction, environmental riskDiplomová práce se zabývá chemickým složením fotovoltaických panelů a posouzením jejich rizikovosti z hlediska životního prostředí. V rešeršní části je shrnuta charakterizace fotovoltaických panelů včetně složení jejich vrstev a významu některých specifických kovů v těchto zařízeních. Práce zmiňuje i životní cyklus fotovoltaických panelů od výroby do konce životnosti včetně několika prací o jejich recyklaci. Praktická část je zaměřená na chemickou analýzu několika různých typů fotovoltaických panelů. Analýzy potvrdily kromě hlavních prvků panelů (Si, Al, Fe, Na, Ca) zvýšené obsahy zájmových prvků (zejména některých kovů jako Cu, Ag, Sb, Sn, Zn, Pb) na úrovni desítek až tisíců mg/kg v závislosti na typu zpracovávaného vzorku. Potenciálně ekonomicky zajímavou hodnotu vykazují obsahy Ag. Koncentrace Ag dosahují hodnot stovek až 1 300 mg/kg (~ 1 200 g Ag/t panelů) pro některé typy zpracovávaných vzorků. Z další kovů vykazují vysoké hodnoty Cu (až 16 700 mg/kg), Sb (až 1 890 mg/kg) nebo Sn (až 2 050 mg/kg). Na základě stanovených koncentrací zájmových prvků (vybraných kovů) ve vzorcích všech typů panelů panelů, byly vybrány vzorky k loužícím experimentům. Loužící experimenty (za pomocí činidel deionizované vody a EDTA) byly provedeny ve dvou časových intervalech (24 a 168 hod). Byla prokázána velmi...
The diploma work deals with chemical composition of photovoltaic panels and assessment of their environmental risks. In its introduction part, the characterization of photovoltaic panels, including the composition of their layers and the significance of some specific metals in these facilities, is summarized. The introduction part also mentions the life cycle of photovoltaic panels from production to end of life. The experimental part is focused on chemistry of several different types of photovoltaic panels. In addition to the major elements of the panels (Si, Al, Fe, Na, Ca), the analyzes confirmed the increased content of interest metals (especially Cu, Ag, Sb, Sn, Zn, Pb) at tens to thousands of mg/kg depending on the processed sample. A potentially economically interesting value is Ag. The Ag concentrations range from hundreds to 1,300 mg/kg (~ 1,200 g Ag / t of panels) for some types of processed samples. High concentrations exhibit Cu (up to 16,700 mg/kg), Sb (up to 1,890 mg/kg) or Sn (up to 2050 mg/kg). Leaching experiments (using deionized water and EDTA reagents) were performed at two time intervals (24 and 168 hours). Very low leachability of the metals from the studied samples (in order of per mil or less) has been demonstrated. The studied samples of photovoltaic panels can be classified...