Thin films of plasma polymers as stable supports for biomedical applications
Příprava tenkých vrstev plazmovou polymerací jako stabilních podložek pro biolékařské aplikace
dizertační práce (OBHÁJENO)
Zobrazit/ otevřít
Trvalý odkaz
http://hdl.handle.net/20.500.11956/57311Identifikátory
SIS: 61529
Kolekce
- Kvalifikační práce [10932]
Autor
Vedoucí práce
Oponent práce
Novák, Rudolf
Pavlík, Jaroslav
Fakulta / součást
Matematicko-fyzikální fakulta
Obor
Biofyzika, chemická a makromolekulární fyzika
Katedra / ústav / klinika
Katedra makromolekulární fyziky
Datum obhajoby
17. 10. 2012
Nakladatel
Univerzita Karlova, Matematicko-fyzikální fakultaJazyk
Angličtina
Známka
Prospěl/a
Klíčová slova (česky)
plazmová polymerizace, PEO, "non-fouling" vlastnosti, adsorpce proteinů, adheze buněkKlíčová slova (anglicky)
plasma polymerization, PEO, 'non-fouling' properties, protein adsorption, cell adhesionNázev práce: Příprava tenkých vrstev plazmovou polymerací jako stabilních podložek pro biolékařské aplikace Autor: Ivan Gordeev Ústav: Univerzita Karlova v Praze, Katedra Makromolekulární Fyziky Vedoucí doktorské práce: Doc. Ing. Andrey Shukurov, Ph.D., Univerzita Karlova v Praze, Katedra Makromolekulární Fyziky Abstrakt: Plazmové polymery jsou všeobecně považovány za vhodné pro použití jako biologicky aktivní vrstvy. V biomedicíně jsou obzvláště důležité povrchy, které odolávají vytváření biovrstev. Tato práce je zaměřena na vývoj nových metod využívajících plazma pro depozice bio-rezistentních ("non-fouling") plazmových polymerů. Pro tyto účely byl vybrán jako vhodný materiál poly(ethylen oxid) (PEO). R.f. magnetronové naprašování, tepelná depozice za asistence plazmatu a amplitudově-modulovaný AC povrchový dielektrický bariérový výboj za atmosférického tlaku jsou metody, které byly přizpůsobeny pro přípravu tenkých filmů s laditelným chemickým složením, hustotou sesíťování a laditelnou biologickou odezvou. Byly získány nové poznatky o procesech plazmové polymerace a jejich vlivu na složení a strukturu výsledných vrstev s řízenými biologickými vlastnostmi. Klíčová slova: plazmová polymerizace, PEO, "non-fouling" vlastnosti, adsorpce proteinů, adheze buněk
Title: Thin films of plasma polymers as stable supports for biomedical applications Author: Ivan Gordeev Institute: Charles University in Prague, Department of Macromolecular Physics Supervisor of the doctoral thesis: Doc. Ing. Andrey Shukurov, Ph.D, Charles University in Prague, Department of Macromolecular Physics. Abstract: Plasma polymers have been widely considered for use as bio-active coatings. In biomedicine, the surfaces that withstand accumulation of biofilms are of particular importance. This thesis is focused on development of new plasma-based methods for deposition of bio-resistant (non-fouling) plasma polymers. Poly(ethylene oxide) was the subject material. R.f. magnetron sputtering, plasma-assisted thermal vapour deposition and amplitude modulated atmospheric pressure surface dielectric barrier discharge were the methods adapted to fabricate thin films with tunable chemical composition, cross-link density and biological response. A new insight was gained into the processes of plasma polymerization as well as into composition/structure relationship and its effect on biological properties of resultant films. Keywords: plasma polymerization, PEO, 'non-fouling' properties, protein adsorption, cell adhesion