Hledat
Zobrazují se záznamy 31-40 z 42
Vliv mikrostrukturních parametrů na mechanické vlastnosti polykrystalického hořčíku
Dependence of mechanical properties of polycrystalline magnesium on microstructural parameters
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2011
Datum obhajoby: 23. 06. 2011
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Předložená práce se zabývá studiem deformace vzorků čistého hořčíku s různými velikostmi zrna v závislosti na teplotě a způsobu deformace. Deformace v tahu a tlaku jsou prováděny na 3 různých vzorcích lišících se velikostí ...
The deformation of commercially pure magnesium with various grain size in different temperatures is investigated in the present work. Compression and tensile test were done on three different samples in temperature range ...
The deformation of commercially pure magnesium with various grain size in different temperatures is investigated in the present work. Compression and tensile test were done on three different samples in temperature range ...
Studium vlastností titanu připraveného metodami intenzivní plastické deformace
Study of properties of Titanium prepared by SPD methods
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Harcuba, Petr
Datum publikování: 2013
Datum obhajoby: 19. 06. 2013
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: V předložené práci byly studovány vlastnosti komerčně čistého titanu čtvrté jakostní třídy připraveného metodou equal channel angular pressing (ECAP). Experimentální studium probíhalo pomocí měření mikrotvrdosti, elektrického ...
In present work the properties of comercially pure titanium fouth grade processed by equal channel angular pressing (ECAP) were studied. Experimental techniques such as Vickers microhardness, measurement of electrical ...
In present work the properties of comercially pure titanium fouth grade processed by equal channel angular pressing (ECAP) were studied. Experimental techniques such as Vickers microhardness, measurement of electrical ...
Vlastnosti tenkých vrstev studované pomocí in-situ TEM.
Properties of thin films studied by in-situ TEM
Diplomová práce (OBHÁJENO)
Vedoucí práce: Cieslar, Miroslav
Datum publikování: 2021
Datum obhajoby: 15. 09. 2021
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Mechanické vlastnosti široko aplikovateľných tenkých nanokryštalických filmov sú už nejakú dobu objektom záujmu pre ich rozdiely od vlastností typicky pozorovaných v objemových materiáloch so zrnami na mikrometrovej škále. ...
Mechanical properties of widely applicable thin nanocrystalline films have been a sub- ject of interest for some time due to deviation of their properties from the properties of bulk and micro sized grain materials. The ...
Mechanical properties of widely applicable thin nanocrystalline films have been a sub- ject of interest for some time due to deviation of their properties from the properties of bulk and micro sized grain materials. The ...
Optimalizace mechanických vlastností IF ocelí
Optimalization of mechanical properties of IF steels
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2008
Datum obhajoby: 24. 06. 2008
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt nenalezen
Studium rozdělení disperzních částic v nerovnovážně utuhnutých hliníkových slitinách
Distribution of dispersoids in fast solidified aluminium alloys.
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Cieslar, Miroslav
Datum publikování: 2009
Datum obhajoby: 23. 06. 2009
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt nenalezen
Vliv tepelného zpracováni na deformační chováni tvářených Mg-Zn slitin
Influence of heat treatment on deformation behaviour of wrought Mg-Zn-based alloys
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Drozdenko, Daria
Datum publikování: 2018
Datum obhajoby: 27. 06. 2018
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Názov práce: Vplyv tepelného spracovania na deformačné chovanie tvárnených Mg-Zn zliatin. Autor: Juraj Olejňák Katedra: Katedra fyziky materiálů Vedúci bakalárskej práce: RNDr. Mgr. Daria Drozdenko, Ph.D. Abstrakt: Predložená ...
Title: Influence of heat treatment on deformation behaviour of wrought Mg-Zn alloys Author: Juraj Olejňák Department: Department of Physics of Materials Supervisor: RNDr. Mgr. Daria Drozdenko, Ph.D. Abstract: The aim of ...
Title: Influence of heat treatment on deformation behaviour of wrought Mg-Zn alloys Author: Juraj Olejňák Department: Department of Physics of Materials Supervisor: RNDr. Mgr. Daria Drozdenko, Ph.D. Abstract: The aim of ...
Morfologie a tvrdost částic titanového prášku připraveného kryogenním mletím
Morphology and hardness of particles of titanium powder prepared by cryogenic milling
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Stráský, Josef
Datum publikování: 2018
Datum obhajoby: 08. 02. 2018
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: The effect of cryogenic milling on morphology and microhardness of titanium powder was investigated. Initial powder of commercially pure titanium was subjected to cryogenic milling in liquid argon (LAr) using two different ...
V baklářské práci byl studován vliv kryogenního mletí na morfologii a mikrotvrdost částic prášku komerčně čistého titanu. Výchozí titanový prášek byl podroben kryogennímu mletí v kapalném argonu (LAr) při dvou různých ...
V baklářské práci byl studován vliv kryogenního mletí na morfologii a mikrotvrdost částic prášku komerčně čistého titanu. Výchozí titanový prášek byl podroben kryogennímu mletí v kapalném argonu (LAr) při dvou různých ...
Mechanické vlastnosti a mikrostruktura ultrajemnozrnných hořčíkových slitin s obsahem neodymu a zinku
Mechanical properties and microstructure of ultrafine-grained magnesium alloys containg neodymium and zinc
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Stráská, Jitka
Datum publikování: 2019
Datum obhajoby: 25. 06. 2019
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: V této bakalářské práci byly zkoumány dvě hořčíkové slitiny obsahující ne- odym a zinek (Mg-5Nd-1Zn a Mg-1Nd-1Zn). Experimentální materiál byl zpra- cován metodou intenzivní plastické deformace - metodou ECAP. Vliv na mik- ...
Two experimental magnesium alloys containing neodymium and zinc (Mg- 5Nd-1Zn and Mg-1Nd-1Zn) were processed by severe plastic deformation (SPD) method - equal channel angular pressing (ECAP). The influence of the processing ...
Two experimental magnesium alloys containing neodymium and zinc (Mg- 5Nd-1Zn and Mg-1Nd-1Zn) were processed by severe plastic deformation (SPD) method - equal channel angular pressing (ECAP). The influence of the processing ...
Mikrostruktura nerovnovážných tuhých roztoků na bázi Al-Mn
Microstructure of non-equiblirium Al-Mn based solid solutions
Diplomová práce (OBHÁJENO)
Vedoucí práce: Cieslar, Miroslav
Datum publikování: 2010
Datum obhajoby: 17. 05. 2010
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Tepelné výměníky v automobilovém průmyslu jsou často vyráběny z hliníkové slitiny AW 3003. Současná snaha o redukci hmotnosti automobilů vede k potřebě snížit tloušťku fólií, ze kterých se výměníky vyrábí. Aby se vyhovělo ...
Heat exchangers in automotive industry are often manufactured from aluminum-based alloy AW 3003. In recent time, the aim to reduce the weight of the cars leads to thickening of the foils, which are used for manufacturing ...
Heat exchangers in automotive industry are often manufactured from aluminum-based alloy AW 3003. In recent time, the aim to reduce the weight of the cars leads to thickening of the foils, which are used for manufacturing ...
Analýza mikrostruktury a mechanizmů plastické deformace vysokopevných Mg-Zn-Y slitin
Analysis of microstructure and mechanisms of plastic deformation of high-strength Mg-Zn-Y alloys
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Drozdenko, Daria
Datum publikování: 2024
Datum obhajoby: 18. 06. 2024
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: This thesis in focused on revealing deformation mechanisms resulting in high-strength and moderate elongation of the Mg97.94Zn0.56Y1.5 (at. %) alloys prepared by rapidly solidified ribbon consolidation technique. The ...
Tato práce se zaměřuje na odhalení mechanismů deformace vedoucích k vysoké pevnosti a zároveň zlepšenou tvarovatelnost Mg97.94Zn0.56Y1.5 (at. %) slitin, připravených technikou rychlé solidifikace. Způsob zpracování a použití ...
Tato práce se zaměřuje na odhalení mechanismů deformace vedoucích k vysoké pevnosti a zároveň zlepšenou tvarovatelnost Mg97.94Zn0.56Y1.5 (at. %) slitin, připravených technikou rychlé solidifikace. Způsob zpracování a použití ...