Hledat
Zobrazují se záznamy 1-10 z 14
Optimization of properties of Ti based alloys for biomedical and structural applications
Optimalizace vlastností Ti slitin pro biomedicínské a strukturní aplikace
Dizertační práce (OBHÁJENO)
Vedoucí práce: Janeček, Miloš
Datum publikování: 2014
Datum obhajoby: 08. 09. 2014
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Title: Optimization of properties of Ti based alloys for biomedical and structural applications Author: Josef Stráský Department / Institute: Department of Physics of Materials Supervisor of the doctoral thesis: Assoc. ...
Název práce: Optimalizace vlastností Ti slitin pro biomedicínské a strukturní aplikace Autor: Josef Stráský Katedra / Ústav: Katedra fyziky materiálů Vedoucí doktorské práce: Doc. RNDr. Miloš Janeček, CSc. Abstrakt: Slitiny ...
Název práce: Optimalizace vlastností Ti slitin pro biomedicínské a strukturní aplikace Autor: Josef Stráský Katedra / Ústav: Katedra fyziky materiálů Vedoucí doktorské práce: Doc. RNDr. Miloš Janeček, CSc. Abstrakt: Slitiny ...
Mechanical properties of pre-compressed Mg-Zn-Ca alloy
Mechanické vlastnosti předdeformované slitiny Mg-Zn-Ca
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Dobroň, Patrik
Datum publikování: 2018
Datum obhajoby: 27. 06. 2018
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Hexagonálna tesne usporiadaná štruktúra v tepaných Mg zliatinách spolu so zreteľnou bazálnou textúrou vedie k asymetrii mechanických vlastností. Táto bakalárska práca je zámerná na porozumenie vplyvu predošlej deformácie ...
In wrought Mg alloys, their hexagonal closed packed structure together with a pronounced basal texture lead to anisotropy of mechanical properties. This bachelor thesis is focused on understanding the influence of previous ...
In wrought Mg alloys, their hexagonal closed packed structure together with a pronounced basal texture lead to anisotropy of mechanical properties. This bachelor thesis is focused on understanding the influence of previous ...
Effect of composition and microstructure on mechanical and corrosion properties in magnesium alloys with a potential for medical applications.
Vliv složení a mikrostruktury na mechanické a korozní charakteristiky v hořčíkových slitinách s potenciálem pro medicínské aplikace.
Dizertační práce (OBHÁJENO)
Vedoucí práce: Král, Robert
Datum publikování: 2014
Datum obhajoby: 22. 09. 2014
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Názov práce: Vplyv zloženia a mikroštruktúry na mechanické a korózne charakteristiky v horčíkových zliatinách s potenciálom pre medicínske aplikácie. Autor: RNDr. Peter MINÁRIK Katedra / Ústav: Katedra fyziky materiálů, ...
Title: Effect of composition and microstructure on mechanical and corrosion properties in magnesium alloys with a potential for medical applications. Author: RNDr. Peter MINÁRIK Department / Institute: Department of Physics ...
Title: Effect of composition and microstructure on mechanical and corrosion properties in magnesium alloys with a potential for medical applications. Author: RNDr. Peter MINÁRIK Department / Institute: Department of Physics ...
Mechanické a termofyzikálne vlastnosti keramických materiálov na báze illitu.
Mechanical and thermophysical properties of illite-based ceramic materials.
Mechanické a termofyzikálne vlastnosti keramických materiálov na báze illitu.
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Knapek, Michal
Datum publikování: 2018
Datum obhajoby: 27. 06. 2018
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Názov práce: Mechanické a termofyzikálne vlastnosti keramických materiálov na báze illitu Autor: Jakub Kušnír Katedra / Ústav: Katedra fyziky materiálů Vedúcí bakalárskej práce: RNDr. Michal Knapek, Ph.D, Katedra fyziky ...
Title: Mechanical and thermophysical properties of illite-based ceramic materials. Author: Jakub Kušnír Department: Department of Physics of Materials Supervisor: RNDr. Michal Knapek, Ph.D, Department of Physics of Materials ...
Title: Mechanical and thermophysical properties of illite-based ceramic materials. Author: Jakub Kušnír Department: Department of Physics of Materials Supervisor: RNDr. Michal Knapek, Ph.D, Department of Physics of Materials ...
Mechanické vlastnosti ultrajemnozrnných hořčíkových slitin
Mechanical properties of ultrafine-grained magnesium alloys
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Stráská, Jitka
Datum publikování: 2014
Datum obhajoby: 09. 09. 2014
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Tato práce je zaměřena na studium mechanických vlastností ultrajemnozrnné hořčíkové slitiny AZ31 připravené metodou EX-ECAP, zejména na možnost dosažení superplastické deformace v závislosti na vnějších podmínkách. Mechanické ...
This work is focused on the mechanical properties of ultrafine-grained magnesium alloy AZ31 prepared by EX-ECAP method. The main goal of the bachelor thesis is to find external conditions of superplastic deformation: ...
This work is focused on the mechanical properties of ultrafine-grained magnesium alloy AZ31 prepared by EX-ECAP method. The main goal of the bachelor thesis is to find external conditions of superplastic deformation: ...
Experimentální studium ultrajemnozrnných slitin Ti pro využití v biomedicíně
Experimentální studium ultrajemnozrnných slitin Ti pro využití v biomedicíně
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Stráský, Josef
Datum publikování: 2013
Datum obhajoby: 19. 06. 2013
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: V předložené práci je studován vývoj mikrostruktury slitiny Ti-6Al-7Nb připravené pomocí torze za vysokého tlaku (high pressure torsion - HPT) a protlačováním pravoúhlým kanálem (equal channel angular pressing- ECAP). ...
In the present work the microstructure evolution of Ti-6Al-7Nb alloy prepared by high pressure torsion (HPT) and equal channel angular pressing (ECAP) was studied by scanning electron microscopy, microhardness measurements ...
In the present work the microstructure evolution of Ti-6Al-7Nb alloy prepared by high pressure torsion (HPT) and equal channel angular pressing (ECAP) was studied by scanning electron microscopy, microhardness measurements ...
Study of novel magnesium alloys with controlled microstructure and texture
Studium nových slitin na bázi Mg s řízenou mikrostrukturou a texturou
Dizertační práce (OBHÁJENO)
Vedoucí práce: Dobroň, Patrik
Datum publikování: 2016
Datum obhajoby: 20. 09. 2016
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Téma: Studium nových slitin na bázi Mg s řízenou mikrostrukturou a texturou Autor: Daria Drozdenko Školící pracoviště: Katedra fyziky materiálů, Univerzita Karlova v Praze, Matematicko-fyzikální fakulta Školitel: Ing. ...
Title: Study of novel magnesium alloys with controlled microstructure and texture Author: Daria Drozdenko Department / Institute: Department of Physics of Materials, Faculty of Mathematics and Physics, Charles University ...
Title: Study of novel magnesium alloys with controlled microstructure and texture Author: Daria Drozdenko Department / Institute: Department of Physics of Materials, Faculty of Mathematics and Physics, Charles University ...
Mikrostruktura a mechanické vlastnosti hliníkových slitin po intenzivní plastické deformaci
Microstructure and mechanical properties of aluminium alloys prepared by severe plastic deformation
Diplomová práce (OBHÁJENO)
Vedoucí práce: Cieslar, Miroslav
Datum publikování: 2015
Datum obhajoby: 09. 09. 2015
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Nové technologie výroby součástí v automobilovém a leteckém průmyslu a požadavky na zlepšení mechanických a korozních vlastností kovových materiálů v obalovém průmyslu podněcují využívání vysoce inovativních a nekonvenčních ...
New technologies of components assembling in car and aircraft industries and requests on improved mechanical and corrosion properties of metallic materials in the packing industry activate the utilization of highly innovative ...
New technologies of components assembling in car and aircraft industries and requests on improved mechanical and corrosion properties of metallic materials in the packing industry activate the utilization of highly innovative ...
Magnesium alloys designed for medical applications
Slitiny hořčíku určené pro lékařské aplikace
Diplomová práce (OBHÁJENO)
Vedoucí práce: Minárik, Peter
Datum publikování: 2018
Datum obhajoby: 06. 06. 2018
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Názov: Slitiny hořčíku určené pro lékařské aplikace Author: Mária Zemková Abstract: Táto Diplomová práca sa venuje vplyvu termomechanického spracovania, konkrétne horúcou extrúziou a pretláčaním cez lomený kanál (ECAP), ...
Title: Magnesium alloys designed for medical applications Author: Mária Zemková Abstract: This Master thesis is focused on the influence of hot extrusion and equal channel angular pressing (ECAP) on the microstructure, ...
Title: Magnesium alloys designed for medical applications Author: Mária Zemková Abstract: This Master thesis is focused on the influence of hot extrusion and equal channel angular pressing (ECAP) on the microstructure, ...
Vlastnosti tenkých vrstev studované pomocí in-situ TEM.
Properties of thin films studied by in-situ TEM
Diplomová práce (OBHÁJENO)
Vedoucí práce: Cieslar, Miroslav
Datum publikování: 2021
Datum obhajoby: 15. 09. 2021
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Mechanické vlastnosti široko aplikovateľných tenkých nanokryštalických filmov sú už nejakú dobu objektom záujmu pre ich rozdiely od vlastností typicky pozorovaných v objemových materiáloch so zrnami na mikrometrovej škále. ...
Mechanical properties of widely applicable thin nanocrystalline films have been a sub- ject of interest for some time due to deviation of their properties from the properties of bulk and micro sized grain materials. The ...
Mechanical properties of widely applicable thin nanocrystalline films have been a sub- ject of interest for some time due to deviation of their properties from the properties of bulk and micro sized grain materials. The ...