Search
Now showing items 1-10 of 48
Studium mechanických vlastností kompozitů na bázi hořčíkových slitin.
Study of mechanical properties of magnesium-based composites
Studium mechanických vlastností kompozitů na bázi hořčíkových slitin.
bachelor thesis (DEFENDED)
Advisor: Mathis, Kristián
Date Issued: 2011
Date of defense: 23. 06. 2011
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Predložená práca sa zabýva pozorovaním mechanických vlastností zliatiny AJ51 a kompozitu na báze tejto zliatiny v závislosti na teplote deformácie. Deformácia v tlaku je uskutočnená v teplotnom intervale od 20řC do 300řC. ...
In the present work, the mechanical properties of AJ51 magnesium alloy and composite is studied. Compression tests in the temperature range of 20řC-300řC have been preformed. The microstructure of the specimen was studied ...
In the present work, the mechanical properties of AJ51 magnesium alloy and composite is studied. Compression tests in the temperature range of 20řC-300řC have been preformed. The microstructure of the specimen was studied ...
Studium dvojčatění v hořčíkové slitině AZ31
Investigation of twinning activity in AZ31 magnesium alloy
bachelor thesis (DEFENDED)
Advisor: Mathis, Kristián
Date Issued: 2009
Date of defense: 25. 06. 2009
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract not found
Štúdium deformačných mechanizmov v extrudovaných horčíkových zliatinách s obsahom neodýmu a ytria
Study of deformation mechanisms in extruded magnesium alloys containing neodymium and yttrium
Studium deformačních mechanismů v extrudovaných hořčíkových slitinách s obsahem neodymu a yttria.
bachelor thesis (DEFENDED)
Advisor: Minárik, Peter
Date Issued: 2017
Date of defense: 12. 09. 2017
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Predlo¾ená práca sa zaoberá ¹túdiom ternárnej (WN43) a dvoch binárnych horèíkových zliatin s prímesami neodýmu (2Nd) a ytria (4Y) extrudovaných pri rôznych rýchlostiach (2 a 5 mm/s). Mikro¹truktúra v¹etkých skúmaných vzoriek ...
Submitted work shows results of the investigation of ternary (WN43) and two binary magnesium alloys containing neodymium (2Nd) and yttrium (4Y) extruded at two different extrusion rates (2 and 5 mm/s). Microstructure of ...
Submitted work shows results of the investigation of ternary (WN43) and two binary magnesium alloys containing neodymium (2Nd) and yttrium (4Y) extruded at two different extrusion rates (2 and 5 mm/s). Microstructure of ...
Mechanical properties of pre-compressed Mg-Zn-Ca alloy
Mechanické vlastnosti předdeformované slitiny Mg-Zn-Ca
bachelor thesis (DEFENDED)
Advisor: Dobroň, Patrik
Date Issued: 2018
Date of defense: 27. 06. 2018
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Hexagonálna tesne usporiadaná štruktúra v tepaných Mg zliatinách spolu so zreteľnou bazálnou textúrou vedie k asymetrii mechanických vlastností. Táto bakalárska práca je zámerná na porozumenie vplyvu predošlej deformácie ...
In wrought Mg alloys, their hexagonal closed packed structure together with a pronounced basal texture lead to anisotropy of mechanical properties. This bachelor thesis is focused on understanding the influence of previous ...
In wrought Mg alloys, their hexagonal closed packed structure together with a pronounced basal texture lead to anisotropy of mechanical properties. This bachelor thesis is focused on understanding the influence of previous ...
Štúdium vývoja dislokačnej štruktúry v pokročilých horčíkových zliatinách
Investigation of dislocation structure evolution in advanced magnesium alloys
Studium vývoje dislokační struktury v pokročilých hořčíkových slitinách
bachelor thesis (DEFENDED)
Advisor: Mathis, Kristián
Date Issued: 2020
Date of defense: 14. 07. 2020
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: : This thesis deals with evolution of dislocation structures in mag- nesium alloys containing long-period stacking ordered phase (LPSO). Before de- formation the samples were studied by optical light microscopy, in the ...
: Předkládaná práce se zabývá vývojem dislokačných struktur v hořčíkových slitinách obsahujících fáze uspořádány na dlouhé vzdálenosti, takz- vané LPSO fáze. Vzorky byly studovány pomocí optické světelné mikroskopie ve ...
: Předkládaná práce se zabývá vývojem dislokačných struktur v hořčíkových slitinách obsahujících fáze uspořádány na dlouhé vzdálenosti, takz- vané LPSO fáze. Vzorky byly studovány pomocí optické světelné mikroskopie ve ...
Interakce tokamakového plazmatu s vybranými fúzními materiály
Interaction of tokamak plasma with selected fusion materials
bachelor thesis (DEFENDED)
Advisor: Janeček, Miloš
Date Issued: 2012
Date of defense: 19. 06. 2012
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Title: Interaction of tokamak plasma with selected fusion materials Author: Veronika Klevarová Department: Department of Physics of Materials Supervisor: Doc. RNDr. Miloš Janeček, CSc. Supervisor's e-mail address: ...
Název práce: Interakce tokamakového plazmatu s vybranými fúzními materiály Autor: Veronika Klevarová Katedra (ústav): Katedra fyziky materiálů Vedoucí bakalářské práce: Doc. RNDr. Miloš Janeček, CSc. E-mail vedoucího: ...
Název práce: Interakce tokamakového plazmatu s vybranými fúzními materiály Autor: Veronika Klevarová Katedra (ústav): Katedra fyziky materiálů Vedoucí bakalářské práce: Doc. RNDr. Miloš Janeček, CSc. E-mail vedoucího: ...
Mikrostrukturní změny v moderních slitinách titanu
Microstructure changes in modern Ti-based alloys
bachelor thesis (DEFENDED)
Advisor: Janeček, Miloš
Date Issued: 2010
Date of defense: 22. 06. 2010
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract not found
Biologicky odbouratelné materiály na bázi hořčíku pro stenty a kostní implantáty
Biodegradable Mg-based materials for stents and bone implants
Biologicky odbouratelné materiály na bázi hořčíku pro stenty a kostní implantáty
bachelor thesis (DEFENDED)
Advisor: Král, Robert
Date Issued: 2015
Date of defense: 23. 06. 2015
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Bakalárska práca je zameraná na štúdium vplyvu mechanického spracovania, konkrétne rotačným kovaním (RS), na mikroštruktúru, mechanické vlastnosti a korózne vlastnosti. Tento vplyv bol skúmaný na horčíkovej zliatine AE42 ...
The bachelor thesis is focused on the effect of mechanical processing rotary swaging (RS), specifically on the microstructure, mechanical properties and corrosion properties. The investigation was performed on the magnesium ...
The bachelor thesis is focused on the effect of mechanical processing rotary swaging (RS), specifically on the microstructure, mechanical properties and corrosion properties. The investigation was performed on the magnesium ...
Zliatiny titánu s nízkym modulom pružnosti pre využitie v medicíne
Low-modulus titanium alloys for biomedical use
Slitiny titanu s nízkým modulem pružnosti pro využití v medicíně
bachelor thesis (DEFENDED)
Advisor: Preisler, Dalibor
Date Issued: 2021
Date of defense: 08. 07. 2021
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Slitiny titanu patří k perspektivním biomateriálům pro výrobu kloubních implantátů. Za účelem vývoje biologicky nezávadné slitiny se zlepšenými mechanickými vlastnostmi bylo připraveno a prostudováno dvanáct slitin s různým ...
Titanium alloys belong to a group of perspective biomaterials used for production of joint endoprotheses. In order to develop a biocompatible material with better mechanical properties, twelve alloys with 0.7 wt% of oxygen ...
Titanium alloys belong to a group of perspective biomaterials used for production of joint endoprotheses. In order to develop a biocompatible material with better mechanical properties, twelve alloys with 0.7 wt% of oxygen ...
Využitie metódy sintrovania elektrickým prúdom na prípravu metastabilnej beta zliatiny Ti-15Mo vo forme tyčky
Utilization of field-assisted sintering technique for fabrication of metastable beta titanium alloy in a rod shape
Využití metody sintrování elektrickým proudem pro přípravu metastabilní beta slitiny Ti-15Mo ve formě tyčky
bachelor thesis (DEFENDED)
Advisor: Veverková, Anna
Date Issued: 2021
Date of defense: 14. 09. 2021
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Název práce: Využití metody sintrování elektrickým proudem pro přípravu metastabilní 15Mo ve formě tyčky Adrián Majoros Katedra fyziky materiálů Vedoucí bakalářské práce: RNDr. Anna Veverková, Katedra fyziky materiálů éto ...
Title: Utilization of field-assisted sintering technique for fabrication of metastable beta titanium alloy in a rod shape Author: Adrián Majoros Department: Department of Physics of Materials Supervisor: RNDr. Anna Veverková, ...
Title: Utilization of field-assisted sintering technique for fabrication of metastable beta titanium alloy in a rod shape Author: Adrián Majoros Department: Department of Physics of Materials Supervisor: RNDr. Anna Veverková, ...