Hledat
Zobrazují se záznamy 1-10 z 12
Štúdium deformačných mechanizmov v extrudovaných horčíkových zliatinách s obsahom neodýmu a ytria
Study of deformation mechanisms in extruded magnesium alloys containing neodymium and yttrium
Studium deformačních mechanismů v extrudovaných hořčíkových slitinách s obsahem neodymu a yttria.
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Minárik, Peter
Datum publikování: 2017
Datum obhajoby: 12. 09. 2017
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Predlo¾ená práca sa zaoberá ¹túdiom ternárnej (WN43) a dvoch binárnych horèíkových zliatin s prímesami neodýmu (2Nd) a ytria (4Y) extrudovaných pri rôznych rýchlostiach (2 a 5 mm/s). Mikro¹truktúra v¹etkých skúmaných vzoriek ...
Submitted work shows results of the investigation of ternary (WN43) and two binary magnesium alloys containing neodymium (2Nd) and yttrium (4Y) extruded at two different extrusion rates (2 and 5 mm/s). Microstructure of ...
Submitted work shows results of the investigation of ternary (WN43) and two binary magnesium alloys containing neodymium (2Nd) and yttrium (4Y) extruded at two different extrusion rates (2 and 5 mm/s). Microstructure of ...
Mechanical properties of pre-compressed Mg-Zn-Ca alloy
Mechanické vlastnosti předdeformované slitiny Mg-Zn-Ca
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Dobroň, Patrik
Datum publikování: 2018
Datum obhajoby: 27. 06. 2018
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Hexagonálna tesne usporiadaná štruktúra v tepaných Mg zliatinách spolu so zreteľnou bazálnou textúrou vedie k asymetrii mechanických vlastností. Táto bakalárska práca je zámerná na porozumenie vplyvu predošlej deformácie ...
In wrought Mg alloys, their hexagonal closed packed structure together with a pronounced basal texture lead to anisotropy of mechanical properties. This bachelor thesis is focused on understanding the influence of previous ...
In wrought Mg alloys, their hexagonal closed packed structure together with a pronounced basal texture lead to anisotropy of mechanical properties. This bachelor thesis is focused on understanding the influence of previous ...
Investigation of basic deformation mechanisms of magnesium alloys by means of advanced in-situ methods and theoretical modeling
Studium základních deformačních mechanismů hořčíkových slitin pomocí pokročilých in-situ metod a teoretického modelování
Dizertační práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2017
Datum obhajoby: 26. 09. 2017
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Práce je zaměřena na výzkum deformačních vlastností polykrystalických hořčíkových slitin. Součástí práce jsou in-situ měření neutronové difrakce a akustické emise a srovnání experimentálních výsledků s teoretickými modely. ...
The work is focused on developing testing methods for investigating of the deformation mechanisms of magnesium alloys. The work involves the measurement of in-situ acoustic emission and neutron diffraction and comparison ...
The work is focused on developing testing methods for investigating of the deformation mechanisms of magnesium alloys. The work involves the measurement of in-situ acoustic emission and neutron diffraction and comparison ...
Studium mechanických a tepelných vlastností kompozitů zpevněné nanočásticemi
Study of mechanical and thermal properties of nanoparticle-reinforced composites
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2014
Datum obhajoby: 17. 06. 2014
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Název práce: Studium mechanických a tepelných vlastností kompozitů zpevněné nanočásticemi Autor: Gergely Németh Katedra: Katedra fyziky materiálů Vedoucí diplomové práce: RNDr. Kristián Máthis, Ph.D. Abstrakt: Předložená ...
Title: Study of mechanical and thermal properties of composites reinforced by nanoparticles Author: Gergely Németh Department: Department of Physics of Materials Supervisor: RNDr. Kristián Máthis, Ph.D. Abstract: In the ...
Title: Study of mechanical and thermal properties of composites reinforced by nanoparticles Author: Gergely Németh Department: Department of Physics of Materials Supervisor: RNDr. Kristián Máthis, Ph.D. Abstract: In the ...
Studium deformačních mechanismů v hořčíkové slitině s texturou
Investigation of deformation mechanisms in textured magnesium alloy
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Minárik, Peter
Datum publikování: 2019
Datum obhajoby: 25. 06. 2019
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Název práce: Studium deformačních mechanism· v hořčíkové slitině s texturou Autor: Jan Dittrich Katedra: Katedra fyziky materiál· Vedoucí bakalářské práce: RNDr. Peter Minárik, PhD., Katedra fyziky materiál· Abstrakt: ...
Mechanické vlastnosti ultrajemnozrnných hořčíkových slitin
Mechanical properties of ultrafine-grained magnesium alloys
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Stráská, Jitka
Datum publikování: 2014
Datum obhajoby: 09. 09. 2014
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Tato práce je zaměřena na studium mechanických vlastností ultrajemnozrnné hořčíkové slitiny AZ31 připravené metodou EX-ECAP, zejména na možnost dosažení superplastické deformace v závislosti na vnějších podmínkách. Mechanické ...
This work is focused on the mechanical properties of ultrafine-grained magnesium alloy AZ31 prepared by EX-ECAP method. The main goal of the bachelor thesis is to find external conditions of superplastic deformation: ...
This work is focused on the mechanical properties of ultrafine-grained magnesium alloy AZ31 prepared by EX-ECAP method. The main goal of the bachelor thesis is to find external conditions of superplastic deformation: ...
Physical properties of ultrafine-grained magnesium based alloys prepared by various severe plastic deformation techniques
Fyzikální vlastnosti jemnozrnných hořčíkových slitin připravených různými technologiemi
Dizertační práce (OBHÁJENO)
Vedoucí práce: Janeček, Miloš
Datum publikování: 2014
Datum obhajoby: 08. 09. 2014
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Title: Physical properties of ultrafine-grained magnesium based alloys prepared by various severe plastic deformation techniques Author: Jitka Stráská Department / Institute: Department of Physics of Materials Supervisor ...
Název práce: Fyzikální vlastnosti jemnozrnných hořčíkových slitin připravených různými technologiemi Autor: Jitka Stráská Katedra / Ústav: Katedra fyziky materiálů Vedoucí doktorské práce: Doc. RNDr. Miloš Janeček, CSc. ...
Název práce: Fyzikální vlastnosti jemnozrnných hořčíkových slitin připravených různými technologiemi Autor: Jitka Stráská Katedra / Ústav: Katedra fyziky materiálů Vedoucí doktorské práce: Doc. RNDr. Miloš Janeček, CSc. ...
Superplastická deformace ultrajemnozrnných hořčíkových slitin s potenciálem pro použití v medicíně
Superplastic deformation of ultrafine-grained magnesium alloys with potential for use in medicine
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Minárik, Peter
Datum publikování: 2017
Datum obhajoby: 21. 06. 2017
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: V rámci práce byly zkoumány mechanické vlastnosti ultrajemnozrnných hořčíkových slitin AE42 a LAE442 připravených metodou ECAP. Studium bylo zaměřeno na nalezení vhodných podmínek pro superplastickou deformaci. Nejprve ...
Mechanical properties of ultra-fine grain magnesium alloys AE42 and LAE442 prepared by ECAP were investigated. The study was focused on finding suitable conditions for the superplastic deformation. In the first place, the ...
Mechanical properties of ultra-fine grain magnesium alloys AE42 and LAE442 prepared by ECAP were investigated. The study was focused on finding suitable conditions for the superplastic deformation. In the first place, the ...
Study of novel magnesium alloys with controlled microstructure and texture
Studium nových slitin na bázi Mg s řízenou mikrostrukturou a texturou
Dizertační práce (OBHÁJENO)
Vedoucí práce: Dobroň, Patrik
Datum publikování: 2016
Datum obhajoby: 20. 09. 2016
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Téma: Studium nových slitin na bázi Mg s řízenou mikrostrukturou a texturou Autor: Daria Drozdenko Školící pracoviště: Katedra fyziky materiálů, Univerzita Karlova v Praze, Matematicko-fyzikální fakulta Školitel: Ing. ...
Title: Study of novel magnesium alloys with controlled microstructure and texture Author: Daria Drozdenko Department / Institute: Department of Physics of Materials, Faculty of Mathematics and Physics, Charles University ...
Title: Study of novel magnesium alloys with controlled microstructure and texture Author: Daria Drozdenko Department / Institute: Department of Physics of Materials, Faculty of Mathematics and Physics, Charles University ...
Vliv tepelného zpracováni na deformační chováni tvářených Mg-Zn slitin
Influence of heat treatment on deformation behaviour of wrought Mg-Zn-based alloys
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Drozdenko, Daria
Datum publikování: 2018
Datum obhajoby: 27. 06. 2018
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Názov práce: Vplyv tepelného spracovania na deformačné chovanie tvárnených Mg-Zn zliatin. Autor: Juraj Olejňák Katedra: Katedra fyziky materiálů Vedúci bakalárskej práce: RNDr. Mgr. Daria Drozdenko, Ph.D. Abstrakt: Predložená ...
Title: Influence of heat treatment on deformation behaviour of wrought Mg-Zn alloys Author: Juraj Olejňák Department: Department of Physics of Materials Supervisor: RNDr. Mgr. Daria Drozdenko, Ph.D. Abstract: The aim of ...
Title: Influence of heat treatment on deformation behaviour of wrought Mg-Zn alloys Author: Juraj Olejňák Department: Department of Physics of Materials Supervisor: RNDr. Mgr. Daria Drozdenko, Ph.D. Abstract: The aim of ...