Hledat
Zobrazují se záznamy 1-10 z 26
Studium strukturních vlastností modelových katalyzátorů na bázi oxidu ceru
Study of the structural properties of model ceria based catalysts
Rigorózní práce (UZNÁNO)
Datum publikování: 2015
Datum obhajoby: 22. 09. 2015
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Tato práce se zabývá studiem struktury modelových katalyzátorů na bázi oxidu ceru metodami elektronové difrakce RHEED a fotoelektronové spektroskopie XPS. V práci je detailně popsán vliv depozičních podmínek a typu substrátu ...
This work is concerning the study of model ceria based calalysts structure by methods of electron diffraction RHEED and photoelectron spectroscopy XPS. The influence of deposition conditions and substrate on the growth of ...
This work is concerning the study of model ceria based calalysts structure by methods of electron diffraction RHEED and photoelectron spectroscopy XPS. The influence of deposition conditions and substrate on the growth of ...
Studium strukturních vlastností modelových katalyzátorů na bázi oxidu ceru
Study of the structural properties of model ceria based catalysts
Dizertační práce (OBHÁJENO)
Vedoucí práce: Mašek, Karel
Datum publikování: 2015
Datum obhajoby: 25. 06. 2015
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Tato práce se zabývá studiem struktury modelových katalyzátorů na bázi oxidu ceru metodami elektronové difrakce RHEED a fotoelektronové spektroskopie XPS. V práci je detailně popsán vliv depozičních podmínek a typu substrátu ...
This work is concerning the study of model ceria based calalysts structure by methods of electron diffraction RHEED and photoelectron spectroscopy XPS. The influence of deposition conditions and substrate on the growth of ...
This work is concerning the study of model ceria based calalysts structure by methods of electron diffraction RHEED and photoelectron spectroscopy XPS. The influence of deposition conditions and substrate on the growth of ...
Studium senzorických vlastností tenkých vrstev oxidu wolframu
Study of gas sensing properties of tungsten oxide thin films
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Mašek, Karel
Datum publikování: 2015
Datum obhajoby: 23. 06. 2015
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Předmětem předložené práce je studium plynově senzorických vlastností čistých a platinou dopovaných tenkých vrstev oxidu wolframu na skleněném substrátu. Potřebné vrstvy byly připravovány magnetronovým naprašováním z ...
Purpose of this thesis is a study of gas sensing properties of pure and platinum doped tungsten oxide thin films, which are deposited on a glass substrate. Needed films were prepared by magnetron sputtering method. Chemical ...
Purpose of this thesis is a study of gas sensing properties of pure and platinum doped tungsten oxide thin films, which are deposited on a glass substrate. Needed films were prepared by magnetron sputtering method. Chemical ...
Studium adsorpčních vlastností oxidovaného povrchu slitiny TiNb optickými metodami
Studium adsorpčních vlastností oxidovaného povrchu slitiny TiNb optickými metodami
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Nehasil, Václav
Datum publikování: 2015
Datum obhajoby: 23. 06. 2015
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Mezi nejrozšířenější materiály pro kloubní náhrady patří slitina Ti-6Al-4V obsahující toxické prvky Al a V. Jako slibná náhrada se jeví netoxická slitina TiNb. Jelikož není TiNb doposud dostatečně popsán, zaměřuje se tato ...
Contemporary commercially used bone implants include a Ti-6Al-4V alloy. Due to the toxicity of aluminum and vanadium, a TiNb alloy with nontoxic elements appears to be a promising replacement. However, only limited information ...
Contemporary commercially used bone implants include a Ti-6Al-4V alloy. Due to the toxicity of aluminum and vanadium, a TiNb alloy with nontoxic elements appears to be a promising replacement. However, only limited information ...
Metoda iontového zobrazování ve fotodisociačních experimentech v molekulových paprscích
Ion imaging method in molecular beam photodissociation experiments
Diplomová práce (OBHÁJENO)
Vedoucí práce: Fárník, Michal
Datum publikování: 2015
Datum obhajoby: 15. 06. 2015
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: V rámci této diplomové práci jsem se seznámil s metodou iontového zobrazení v experimentu s molekulovým paprskem. Vytvořil jsem program na sběr dat. Podstatným rysem tohoto programu je, že dokáže pracovat se třemi různými ...
During my master thesis I became familiar with ion imaging and velocity map imaging (VMI) techniques in experiments with molecular beam. My major contribution was writing a computer program for data acquisition and ...
During my master thesis I became familiar with ion imaging and velocity map imaging (VMI) techniques in experiments with molecular beam. My major contribution was writing a computer program for data acquisition and ...
Vliv snižování teploty povrchu křemíku Si(100) na morfologii růstu kovu při malém pokrytí
Influence of decreasing surface temperature of Si(100) on metal growth morphology at low coverage
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Ošťádal, Ivan
Datum publikování: 2015
Datum obhajoby: 11. 09. 2015
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Práce se zabývá studiem růstu cínových řetízků na povrchu Si(100) připravovaných napařováním při teplotách nižších než pokojová. Pomocí skenovací tunelové mikroskopie (STM) byly ...
The thesis is focused on study of growth of tin chains on Si(100) surface deposited by vacuum evaporation at temperatures below room temperature. Scanning tunneling microscopy ...
The thesis is focused on study of growth of tin chains on Si(100) surface deposited by vacuum evaporation at temperatures below room temperature. Scanning tunneling microscopy ...
Experimental control of Ce3+ concentration in ceria based model catalysts
Experimentální kontrola koncentrace iontů Ce3+ v modeloých katalyzátorech na bázi oxidu ceru
Dizertační práce (OBHÁJENO)
Vedoucí práce: Mysliveček, Josef
Datum publikování: 2015
Datum obhajoby: 22. 09. 2015
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Koncentrace iontů Ce3+ je jeden z nejvýznamnějších parametrů ovlivňujících reaktivitu katalyzátorů na bázi oxidu ceru. V této práci jsou zkoumány různé experimentální přístupy pro kontrolu koncentrace iontů Ce3+ v modelových ...
Concentration of Ce3+ is one of the most important parameters that influence the reactivity of ceria based catalyst. In this work we examine different experimental approaches for controlling Ce3+ concentration in cerium ...
Concentration of Ce3+ is one of the most important parameters that influence the reactivity of ceria based catalyst. In this work we examine different experimental approaches for controlling Ce3+ concentration in cerium ...
Studium tenkých vrstev pro vodíkové palivové články
Investigation of thin films for hydrogen fuel cells
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Matolín, Vladimír
Datum publikování: 2015
Datum obhajoby: 23. 06. 2015
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Již dlouho dobu se usiluje o nalezení čistého a efektivního zdroje energie, který by vyřešil energetické a ekologické problémy. Klíčovou technologií, jež by mohla toto hledání ukončit, jsou palivové články, jež přeměňují ...
Clean and highly efficient energy source has long been sought to solve energy and environmental problems. Fuel cells, which convert the chemical energies sto- red in fuel directly into electrical energy, are expected to ...
Clean and highly efficient energy source has long been sought to solve energy and environmental problems. Fuel cells, which convert the chemical energies sto- red in fuel directly into electrical energy, are expected to ...
Úprava hrotu pro AFM pomocí FIB/GIS v řádkovacím elektronovém mikroskopu
Modifying the AFM tip using FIB/GIS in scanning electron microscope
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Matolínová, Iva
Datum publikování: 2015
Datum obhajoby: 11. 09. 2015
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Mikroskopie atomárních sil (AFM) je široce využívanou metodou pozorování povrchové struktury látek. Získávání informací o reliéfu je uskutečňováno pomocí velmi ostrého hrotu upevněného na ohebném držáku. Tím přejíždíme po ...
Atom force microscopy (AFM) is a widely used imaging method of solids' surface structure. Collecting the information about relief is realized by a very sharp tip fixed on a flexible cantilever. The surface is scanned by ...
Atom force microscopy (AFM) is a widely used imaging method of solids' surface structure. Collecting the information about relief is realized by a very sharp tip fixed on a flexible cantilever. The surface is scanned by ...
Diagnostika plazmatu s využitím sond složité geometrie
Plasma diagnostics by probes with complex geometries
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Hrach, Rudolf
Datum publikování: 2015
Datum obhajoby: 11. 09. 2015
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Při zkoumání chování plazmatu je důležité znát jeho parametry. K tomuto účelu existuje mnoho diagnostických metod, jednou z nich je sondová diagnostika. Jde o lokální metodu, při které dochází ke kontaktu plazmatu s vnořeným ...
In investigating the behaviour of the plasma, it is important to know its parameters. For this purpose, there are many diagnostic methods, one of which is a probe diagnostic. It is a local method in which there is contact ...
In investigating the behaviour of the plasma, it is important to know its parameters. For this purpose, there are many diagnostic methods, one of which is a probe diagnostic. It is a local method in which there is contact ...