dc.contributor.advisor | Kratochvíl, Miroslav | |
dc.creator | Oboňová, Ivona | |
dc.date.accessioned | 2020-03-05T10:52:28Z | |
dc.date.available | 2020-03-05T10:52:28Z | |
dc.date.issued | 2020 | |
dc.identifier.uri | http://hdl.handle.net/20.500.11956/116927 | |
dc.description.abstract | The goal of this thesis is to implement firmware for the Optical Measurement and Calibration Device, which was designed and constructed in CESNET. The purpose of the device is to simplify the calibration of various fibre-optical networking devices, used in CESNET infrastructure. The thesis includes an overview of the internal structure and communication interfaces within the device, which is than used for designing and implementing the firmware. The results are demonstrated on realistic hardware, by running the measurement on an existing optical component. The produced firmware will serve as a basis for the development of more advanced devices in CESNET. | en_US |
dc.description.abstract | Cieľom tejto práce je implementovať firmvér pre Opticko meriacie a kalibračné zariadenie, ktoré bolo navrhnuté a vytvorené v CESNETu. Účelom tohto zariadenia je zjednodušiť kalibráciu pre rôzne opticko-vláknové sieťové zariadenia, používané v CESNET infraštruktúre. Práca obsahuje prehľad internej štruktúry a komunikačného rozhrania, ktoré je neskôr použité pre dizajn a implentáciu firmvéru. Výsledky sú predvedené na reálnom hardvéri spustením merania na existujúcich komponentách. Vyprodukovaný firmvér bude slúžiť ako podklad pre vývoj komplikovanejších zariadení v CESNETu. | cs_CZ |
dc.language | English | cs_CZ |
dc.language.iso | en_US | |
dc.publisher | Univerzita Karlova, Matematicko-fyzikální fakulta | cs_CZ |
dc.subject | firmware | cs_CZ |
dc.subject | nízkoúrovňové ovladače zařízení | cs_CZ |
dc.subject | optické sítě | cs_CZ |
dc.subject | počítačové sítě | cs_CZ |
dc.subject | firmware | en_US |
dc.subject | low-level device drivers | en_US |
dc.subject | fiber optic communications | en_US |
dc.subject | networking | en_US |
dc.title | Firmware for CzechLight optical measurement and calibration device | en_US |
dc.type | bakalářská práce | cs_CZ |
dcterms.created | 2020 | |
dcterms.dateAccepted | 2020-02-13 | |
dc.description.department | Katedra softwarového inženýrství | cs_CZ |
dc.description.department | Department of Software Engineering | en_US |
dc.description.faculty | Faculty of Mathematics and Physics | en_US |
dc.description.faculty | Matematicko-fyzikální fakulta | cs_CZ |
dc.identifier.repId | 211676 | |
dc.title.translated | Firmware pro optické měřící a kalibrační zařízení CzechLight | cs_CZ |
dc.contributor.referee | Aschenbrenner, Vojtěch | |
thesis.degree.name | Bc. | |
thesis.degree.level | bakalářské | cs_CZ |
thesis.degree.discipline | Programming and Software Systems | en_US |
thesis.degree.discipline | Programování a softwarové systémy | cs_CZ |
thesis.degree.program | Computer Science | en_US |
thesis.degree.program | Informatika | cs_CZ |
uk.thesis.type | bakalářská práce | cs_CZ |
uk.taxonomy.organization-cs | Matematicko-fyzikální fakulta::Katedra softwarového inženýrství | cs_CZ |
uk.taxonomy.organization-en | Faculty of Mathematics and Physics::Department of Software Engineering | en_US |
uk.faculty-name.cs | Matematicko-fyzikální fakulta | cs_CZ |
uk.faculty-name.en | Faculty of Mathematics and Physics | en_US |
uk.faculty-abbr.cs | MFF | cs_CZ |
uk.degree-discipline.cs | Programování a softwarové systémy | cs_CZ |
uk.degree-discipline.en | Programming and Software Systems | en_US |
uk.degree-program.cs | Informatika | cs_CZ |
uk.degree-program.en | Computer Science | en_US |
thesis.grade.cs | Neprospěl/a | cs_CZ |
thesis.grade.en | Fail | en_US |
uk.abstract.cs | Cieľom tejto práce je implementovať firmvér pre Opticko meriacie a kalibračné zariadenie, ktoré bolo navrhnuté a vytvorené v CESNETu. Účelom tohto zariadenia je zjednodušiť kalibráciu pre rôzne opticko-vláknové sieťové zariadenia, používané v CESNET infraštruktúre. Práca obsahuje prehľad internej štruktúry a komunikačného rozhrania, ktoré je neskôr použité pre dizajn a implentáciu firmvéru. Výsledky sú predvedené na reálnom hardvéri spustením merania na existujúcich komponentách. Vyprodukovaný firmvér bude slúžiť ako podklad pre vývoj komplikovanejších zariadení v CESNETu. | cs_CZ |
uk.abstract.en | The goal of this thesis is to implement firmware for the Optical Measurement and Calibration Device, which was designed and constructed in CESNET. The purpose of the device is to simplify the calibration of various fibre-optical networking devices, used in CESNET infrastructure. The thesis includes an overview of the internal structure and communication interfaces within the device, which is than used for designing and implementing the firmware. The results are demonstrated on realistic hardware, by running the measurement on an existing optical component. The produced firmware will serve as a basis for the development of more advanced devices in CESNET. | en_US |
uk.file-availability | V | |
uk.grantor | Univerzita Karlova, Matematicko-fyzikální fakulta, Katedra softwarového inženýrství | cs_CZ |
thesis.grade.code | 4 | |
uk.publication-place | Praha | cs_CZ |