dc.contributor.advisor | Stráská, Jitka | |
dc.creator | Šašek, Stanislav | |
dc.date.accessioned | 2021-03-26T11:36:12Z | |
dc.date.available | 2021-03-26T11:36:12Z | |
dc.date.issued | 2019 | |
dc.identifier.uri | http://hdl.handle.net/20.500.11956/108228 | |
dc.description.abstract | V této bakalářské práci byly zkoumány dvě hořčíkové slitiny obsahující ne- odym a zinek (Mg-5Nd-1Zn a Mg-1Nd-1Zn). Experimentální materiál byl zpra- cován metodou intenzivní plastické deformace - metodou ECAP. Vliv na mik- rostrukturu původně extrudovaného, resp. litého stavu byl zkoumán světelnou mikroskopií, transmisní elektronovou mikroskopií a skenovací elektronovou mi- kroskopií včetně difrakce zpětně odražených elektronů. Vlivem osmi průchodů metodou ECAP došlo k výraznému zjemnění zrna u obou zkoumaných slitin a bylo dosaženo ultrajemnozrnné mikrostruktury. Vliv změny mikrostruktury na mechanické vlastnosti byl zkoumán pomocí tlakových zkoušek a měření mikro- tvrdosti. Zjemnění zrna mělo velký vliv na všechny zkoumané parametry, včetně meze kluzu σ0,2, meze pevnosti σP i mikrotvrdosti. 1 | cs_CZ |
dc.description.abstract | Two experimental magnesium alloys containing neodymium and zinc (Mg- 5Nd-1Zn and Mg-1Nd-1Zn) were processed by severe plastic deformation (SPD) method - equal channel angular pressing (ECAP). The influence of the processing on the microstructure was studied by light optical microscopy (LOM), transmis- sion electron microscopy (TEM) and also scanning electron microscopy (SEM) including electron backscatter diffraction (EBSD). A significant grain refinement was observed after the final stage of ECAP in both alloys resulting in homogenous ultra-fine grained condition. Microstructure development had a significant influ- ence on mechanical properties which were investigated by microhardness measu- rements and compression deformation tests. Both the yield compression strength σ0,2 and the microhadness significantly increased compared to the extruded/as- cast counterparts. 1 | en_US |
dc.language | Čeština | cs_CZ |
dc.language.iso | cs_CZ | |
dc.publisher | Univerzita Karlova, Matematicko-fyzikální fakulta | cs_CZ |
dc.subject | Ultrafine-grained materials | en_US |
dc.subject | magnesium alloys | en_US |
dc.subject | mechanical properties | en_US |
dc.subject | microstructure | en_US |
dc.subject | Ultrajemnozrnné materiály | cs_CZ |
dc.subject | hořčíkové slitiny | cs_CZ |
dc.subject | mechanické vlastnosti | cs_CZ |
dc.subject | mikrostruktura | cs_CZ |
dc.title | Mechanické vlastnosti a mikrostruktura ultrajemnozrnných hořčíkových slitin s obsahem neodymu a zinku | cs_CZ |
dc.type | bakalářská práce | cs_CZ |
dcterms.created | 2019 | |
dcterms.dateAccepted | 2019-06-25 | |
dc.description.department | Katedra fyziky materiálů | cs_CZ |
dc.description.department | Department of Physics of Materials | en_US |
dc.description.faculty | Matematicko-fyzikální fakulta | cs_CZ |
dc.description.faculty | Faculty of Mathematics and Physics | en_US |
dc.identifier.repId | 187653 | |
dc.title.translated | Mechanical properties and microstructure of ultrafine-grained magnesium alloys containg neodymium and zinc | en_US |
dc.contributor.referee | Krajňák, Tomáš | |
dc.identifier.aleph | 002284906 | |
thesis.degree.name | Bc. | |
thesis.degree.level | bakalářské | cs_CZ |
thesis.degree.discipline | General Physics | en_US |
thesis.degree.discipline | Obecná fyzika | cs_CZ |
thesis.degree.program | Fyzika | cs_CZ |
thesis.degree.program | Physics | en_US |
uk.thesis.type | bakalářská práce | cs_CZ |
uk.taxonomy.organization-cs | Matematicko-fyzikální fakulta::Katedra fyziky materiálů | cs_CZ |
uk.taxonomy.organization-en | Faculty of Mathematics and Physics::Department of Physics of Materials | en_US |
uk.faculty-name.cs | Matematicko-fyzikální fakulta | cs_CZ |
uk.faculty-name.en | Faculty of Mathematics and Physics | en_US |
uk.faculty-abbr.cs | MFF | cs_CZ |
uk.degree-discipline.cs | Obecná fyzika | cs_CZ |
uk.degree-discipline.en | General Physics | en_US |
uk.degree-program.cs | Fyzika | cs_CZ |
uk.degree-program.en | Physics | en_US |
thesis.grade.cs | Výborně | cs_CZ |
thesis.grade.en | Excellent | en_US |
uk.abstract.cs | V této bakalářské práci byly zkoumány dvě hořčíkové slitiny obsahující ne- odym a zinek (Mg-5Nd-1Zn a Mg-1Nd-1Zn). Experimentální materiál byl zpra- cován metodou intenzivní plastické deformace - metodou ECAP. Vliv na mik- rostrukturu původně extrudovaného, resp. litého stavu byl zkoumán světelnou mikroskopií, transmisní elektronovou mikroskopií a skenovací elektronovou mi- kroskopií včetně difrakce zpětně odražených elektronů. Vlivem osmi průchodů metodou ECAP došlo k výraznému zjemnění zrna u obou zkoumaných slitin a bylo dosaženo ultrajemnozrnné mikrostruktury. Vliv změny mikrostruktury na mechanické vlastnosti byl zkoumán pomocí tlakových zkoušek a měření mikro- tvrdosti. Zjemnění zrna mělo velký vliv na všechny zkoumané parametry, včetně meze kluzu σ0,2, meze pevnosti σP i mikrotvrdosti. 1 | cs_CZ |
uk.abstract.en | Two experimental magnesium alloys containing neodymium and zinc (Mg- 5Nd-1Zn and Mg-1Nd-1Zn) were processed by severe plastic deformation (SPD) method - equal channel angular pressing (ECAP). The influence of the processing on the microstructure was studied by light optical microscopy (LOM), transmis- sion electron microscopy (TEM) and also scanning electron microscopy (SEM) including electron backscatter diffraction (EBSD). A significant grain refinement was observed after the final stage of ECAP in both alloys resulting in homogenous ultra-fine grained condition. Microstructure development had a significant influ- ence on mechanical properties which were investigated by microhardness measu- rements and compression deformation tests. Both the yield compression strength σ0,2 and the microhadness significantly increased compared to the extruded/as- cast counterparts. 1 | en_US |
uk.file-availability | V | |
uk.grantor | Univerzita Karlova, Matematicko-fyzikální fakulta, Katedra fyziky materiálů | cs_CZ |
thesis.grade.code | 1 | |
dc.contributor.consultant | Minárik, Peter | |
uk.publication-place | Praha | cs_CZ |
uk.thesis.defenceStatus | O | |
dc.identifier.lisID | 990022849060106986 | |