dc.contributor.advisor | Drozd, Zdeněk | |
dc.creator | Škraban, Tomáš | |
dc.date.accessioned | 2021-03-25T21:26:47Z | |
dc.date.available | 2021-03-25T21:26:47Z | |
dc.date.issued | 2018 | |
dc.identifier.uri | http://hdl.handle.net/20.500.11956/100913 | |
dc.description.abstract | v českém jazyce Hořčíkové slitiny jsou ceněny pro svoji nízkou hustotu a dobré mechanické vlastnosti. Jejich charakteristikou je náchylnost k získávání textury během zpra- cování, která má společně s jejich hcp krystalovou strukturou za následek ani- zotropii některých fyzikálních vlastností. V této práci zjišťujeme vliv textury na anizotropii teplotní roztažnosti hojně používaných hořčíkových slitin AZ31 a ZE10. Tyto slitiny jsou ve formě válcovaných plechů a zkoumáme je ve stavu z výroby a ve stavu po určitém vyžíhání. Měřené vzorky jsou z plechu vyříznuty ve směru válcování a ve směru kolmém. Obor teplot, kterým jsou vzorky vysta- veny, sahá od pokojové teploty do 400 ◦ C. Měření teplotní roztažnosti plechů je problematické, protože se mohou prohýbat a znehodnocovat tak výsledky měření. Výsledkem této práce je potvrzení existence této anizotropie a její popis. 1 | cs_CZ |
dc.description.abstract | Magnesium alloys are valued for their low density and good mechanical pro- perties. Their characteristic is the tendency to obtain a texture during processing, which together with their hcp crystal structure results in the anisotropy of some physical properties. In this work we examine the effect of the texture on the aniso- tropy of thermal expansion of the widely used AZ31 and ZE10 magnesium alloys. These alloys are in the form of thin rolled sheets and we examine them in an as-recieved state and in a condition after an annealing. The measured samples are cut out of the metal sheet in the direction of rolling and in the perpendicular direction. The measurement is carried out in the temperature range from room temperature to 400 ◦ C. Measuring of the thermal expansion of sheets is problema- tic because they can bend and devalue the measurement results. The result of this work is a confirmation of the existence of this anisotropy and its description. 1 | en_US |
dc.language | Čeština | cs_CZ |
dc.language.iso | cs_CZ | |
dc.publisher | Univerzita Karlova, Matematicko-fyzikální fakulta | cs_CZ |
dc.subject | Magnesium alloys | en_US |
dc.subject | Anisotropy | en_US |
dc.subject | Texture | en_US |
dc.subject | Thermal expansion | en_US |
dc.subject | Hořčíkové slitiny | cs_CZ |
dc.subject | Anizotropie | cs_CZ |
dc.subject | Textura | cs_CZ |
dc.subject | Teplotní roztažnost | cs_CZ |
dc.title | Anizotropie teplotní roztažnosti hořčíkových materiálů vykazujících texturu | cs_CZ |
dc.type | bakalářská práce | cs_CZ |
dcterms.created | 2018 | |
dcterms.dateAccepted | 2018-06-25 | |
dc.description.department | Katedra didaktiky fyziky | cs_CZ |
dc.description.department | Department of Physics Education | en_US |
dc.description.faculty | Matematicko-fyzikální fakulta | cs_CZ |
dc.description.faculty | Faculty of Mathematics and Physics | en_US |
dc.identifier.repId | 195328 | |
dc.title.translated | Anisotropy of thermal expansion in magnesium materials exhibiting texture | en_US |
dc.contributor.referee | Mathis, Kristián | |
dc.identifier.aleph | 002200048 | |
thesis.degree.name | Bc. | |
thesis.degree.level | bakalářské | cs_CZ |
thesis.degree.discipline | Physics Directed Towards Education | en_US |
thesis.degree.discipline | Fyzika zaměřená na vzdělávání | cs_CZ |
thesis.degree.program | Fyzika | cs_CZ |
thesis.degree.program | Physics | en_US |
uk.thesis.type | bakalářská práce | cs_CZ |
uk.taxonomy.organization-cs | Matematicko-fyzikální fakulta::Katedra didaktiky fyziky | cs_CZ |
uk.taxonomy.organization-en | Faculty of Mathematics and Physics::Department of Physics Education | en_US |
uk.faculty-name.cs | Matematicko-fyzikální fakulta | cs_CZ |
uk.faculty-name.en | Faculty of Mathematics and Physics | en_US |
uk.faculty-abbr.cs | MFF | cs_CZ |
uk.degree-discipline.cs | Fyzika zaměřená na vzdělávání | cs_CZ |
uk.degree-discipline.en | Physics Directed Towards Education | en_US |
uk.degree-program.cs | Fyzika | cs_CZ |
uk.degree-program.en | Physics | en_US |
thesis.grade.cs | Výborně | cs_CZ |
thesis.grade.en | Excellent | en_US |
uk.abstract.cs | v českém jazyce Hořčíkové slitiny jsou ceněny pro svoji nízkou hustotu a dobré mechanické vlastnosti. Jejich charakteristikou je náchylnost k získávání textury během zpra- cování, která má společně s jejich hcp krystalovou strukturou za následek ani- zotropii některých fyzikálních vlastností. V této práci zjišťujeme vliv textury na anizotropii teplotní roztažnosti hojně používaných hořčíkových slitin AZ31 a ZE10. Tyto slitiny jsou ve formě válcovaných plechů a zkoumáme je ve stavu z výroby a ve stavu po určitém vyžíhání. Měřené vzorky jsou z plechu vyříznuty ve směru válcování a ve směru kolmém. Obor teplot, kterým jsou vzorky vysta- veny, sahá od pokojové teploty do 400 ◦ C. Měření teplotní roztažnosti plechů je problematické, protože se mohou prohýbat a znehodnocovat tak výsledky měření. Výsledkem této práce je potvrzení existence této anizotropie a její popis. 1 | cs_CZ |
uk.abstract.en | Magnesium alloys are valued for their low density and good mechanical pro- perties. Their characteristic is the tendency to obtain a texture during processing, which together with their hcp crystal structure results in the anisotropy of some physical properties. In this work we examine the effect of the texture on the aniso- tropy of thermal expansion of the widely used AZ31 and ZE10 magnesium alloys. These alloys are in the form of thin rolled sheets and we examine them in an as-recieved state and in a condition after an annealing. The measured samples are cut out of the metal sheet in the direction of rolling and in the perpendicular direction. The measurement is carried out in the temperature range from room temperature to 400 ◦ C. Measuring of the thermal expansion of sheets is problema- tic because they can bend and devalue the measurement results. The result of this work is a confirmation of the existence of this anisotropy and its description. 1 | en_US |
uk.file-availability | V | |
uk.grantor | Univerzita Karlova, Matematicko-fyzikální fakulta, Katedra didaktiky fyziky | cs_CZ |
thesis.grade.code | 1 | |
dc.contributor.consultant | Halmešová, Kristýna | |
uk.publication-place | Praha | cs_CZ |
uk.thesis.defenceStatus | O | |
dc.identifier.lisID | 990022000480106986 | |