Zobrazit minimální záznam

A study of the compaction process for the pellets made of microcrystalline cellulose.
dc.contributor.advisorOndrejček, Pavel
dc.creatorTrpělková, Žofie
dc.date.accessioned2017-06-02T01:29:07Z
dc.date.available2017-06-02T01:29:07Z
dc.date.issued2016
dc.identifier.urihttp://hdl.handle.net/20.500.11956/81670
dc.description.abstractUniverzita Karlova v Praze, Farmaceutická fakulta v Hradci Králové Katedra farmaceutické technologie Školitel: Mgr. Pavel Ondrejček, Ph.D. Posluchač: Žofie Trpělková Název diplomové práce: Studium procesu lisování pelet z mikrokrystalické celulosy Tato práce je zaměřena na porovnání dvou typů mikrokrystalické celulosy (Comprecel 102 a Avicel PH-200) se dvěma typy pelet vyrobených z mikrokrystalické celulosy (Cellets 100 a Cellets 200). U těchto materiálů byly zkoumány vlastnosti důležité pro jejich lisování do tablet. Byla hodnocena distribuce velikosti částic, obsahová vlhkost, sypná a setřesná hustota, sypnost, sypný úhel a Hausnerův poměr. Dále byl popsán průběh lisovacího procesu metodou záznamu síla-dráha a trojexponenciální lisovací rovnice. V neposlední řadě byla hodnocena pevnost a oděr tablet lisovaných z těchto materiálů při dvou lisovacích silách. Z výsledků vyplynulo, že oba typy pelet mají mnohem lepší tokové vlastnosti než práškované mikrokrystalické celulosy. Je to dáno především úzkou distribucí velikosti částic, vyšší sypnou i setřesnou hustotou a výrazně hladším povrchem pelet. Lepší tokové vlastnosti pelet také ovlivňovaly parametry záznamu síla dráha a lisovací rovnice. Parametry popisující fázi předlisování byly ovlivněny nejvíce. U obou typů pelet byla v této fázi pozorována...cs_CZ
dc.description.abstractCharles University in Prague, Faculty of Pharmacy in Hradec Králové Department of Pharmaceutical Technology Consultant: Mgr. Pavel Ondrejček, Ph.D. Student: Žofie Trpělková Title: A study of a compaction process of microcrystalline cellulose pellets This work is aimed at the comparison of two types of microcrystalline cellulose (Comprecel 102 a Avicel PH-200) with two types of pellets made of microcrystalline cellulose (Cellets 100 a Cellets 200). Important properties for the compaction into tablets were analyzed in these materials. The particle size distribution, the content of moisture, the bulk and tapped density, the flowability, the angle of repose and the Hausner ratio were evaluated. Furthermore, the compaction process was described by using the force displacement method and the three-exponential equation. Finally, the radial strength and the friability of tablets prepared by using two different compaction forces were evaluated. The results proved that both types of pellets have much better flow properties than powdered microcrystalline celluloses. This is primarily caused by the narrow particle size distribution, higher bulk and tapped density and the significantly smoother surface of pellets. Better flow properties of the pellets also influenced the parameters of the force-displacement...en_US
dc.languageČeštinacs_CZ
dc.language.isocs_CZ
dc.publisherUniverzita Karlova, Farmaceutická fakulta v Hradci Královécs_CZ
dc.subjectZáznam síla-dráhacs_CZ
dc.subjecttest stresové relaxacecs_CZ
dc.subjectrovnice lisovánícs_CZ
dc.subjectelastická a plastická deformacecs_CZ
dc.subjectForce-displacement recorden_US
dc.subjectstress relaxation testen_US
dc.subjectcompaction equationen_US
dc.subjectelastic and plastic deformationen_US
dc.titleStudium procesu lisování pelet z mikrokrystalické celulosy.cs_CZ
dc.typediplomová prácecs_CZ
dcterms.created2016
dcterms.dateAccepted2016-06-01
dc.description.departmentDepartment of Pharmaceutical Technologyen_US
dc.description.departmentKatedra farmaceutické technologiecs_CZ
dc.description.facultyFarmaceutická fakulta v Hradci Královécs_CZ
dc.description.facultyFaculty of Pharmacy in Hradec Královéen_US
dc.identifier.repId156385
dc.title.translatedA study of the compaction process for the pellets made of microcrystalline cellulose.en_US
dc.contributor.refereeHolas, Ondřej
dc.identifier.aleph002090979
thesis.degree.nameMgr.
thesis.degree.levelmagisterskécs_CZ
thesis.degree.disciplineFarmaciecs_CZ
thesis.degree.disciplinePharmacyen_US
thesis.degree.programFarmaciecs_CZ
thesis.degree.programPharmacyen_US
uk.thesis.typediplomová prácecs_CZ
uk.taxonomy.organization-csFarmaceutická fakulta v Hradci Králové::Katedra farmaceutické technologiecs_CZ
uk.taxonomy.organization-enFaculty of Pharmacy in Hradec Králové::Department of Pharmaceutical Technologyen_US
uk.faculty-name.csFarmaceutická fakulta v Hradci Královécs_CZ
uk.faculty-name.enFaculty of Pharmacy in Hradec Královéen_US
uk.faculty-abbr.csFaFcs_CZ
uk.degree-discipline.csFarmaciecs_CZ
uk.degree-discipline.enPharmacyen_US
uk.degree-program.csFarmaciecs_CZ
uk.degree-program.enPharmacyen_US
thesis.grade.csVýborněcs_CZ
thesis.grade.enExcellenten_US
uk.abstract.csUniverzita Karlova v Praze, Farmaceutická fakulta v Hradci Králové Katedra farmaceutické technologie Školitel: Mgr. Pavel Ondrejček, Ph.D. Posluchač: Žofie Trpělková Název diplomové práce: Studium procesu lisování pelet z mikrokrystalické celulosy Tato práce je zaměřena na porovnání dvou typů mikrokrystalické celulosy (Comprecel 102 a Avicel PH-200) se dvěma typy pelet vyrobených z mikrokrystalické celulosy (Cellets 100 a Cellets 200). U těchto materiálů byly zkoumány vlastnosti důležité pro jejich lisování do tablet. Byla hodnocena distribuce velikosti částic, obsahová vlhkost, sypná a setřesná hustota, sypnost, sypný úhel a Hausnerův poměr. Dále byl popsán průběh lisovacího procesu metodou záznamu síla-dráha a trojexponenciální lisovací rovnice. V neposlední řadě byla hodnocena pevnost a oděr tablet lisovaných z těchto materiálů při dvou lisovacích silách. Z výsledků vyplynulo, že oba typy pelet mají mnohem lepší tokové vlastnosti než práškované mikrokrystalické celulosy. Je to dáno především úzkou distribucí velikosti částic, vyšší sypnou i setřesnou hustotou a výrazně hladším povrchem pelet. Lepší tokové vlastnosti pelet také ovlivňovaly parametry záznamu síla dráha a lisovací rovnice. Parametry popisující fázi předlisování byly ovlivněny nejvíce. U obou typů pelet byla v této fázi pozorována...cs_CZ
uk.abstract.enCharles University in Prague, Faculty of Pharmacy in Hradec Králové Department of Pharmaceutical Technology Consultant: Mgr. Pavel Ondrejček, Ph.D. Student: Žofie Trpělková Title: A study of a compaction process of microcrystalline cellulose pellets This work is aimed at the comparison of two types of microcrystalline cellulose (Comprecel 102 a Avicel PH-200) with two types of pellets made of microcrystalline cellulose (Cellets 100 a Cellets 200). Important properties for the compaction into tablets were analyzed in these materials. The particle size distribution, the content of moisture, the bulk and tapped density, the flowability, the angle of repose and the Hausner ratio were evaluated. Furthermore, the compaction process was described by using the force displacement method and the three-exponential equation. Finally, the radial strength and the friability of tablets prepared by using two different compaction forces were evaluated. The results proved that both types of pellets have much better flow properties than powdered microcrystalline celluloses. This is primarily caused by the narrow particle size distribution, higher bulk and tapped density and the significantly smoother surface of pellets. Better flow properties of the pellets also influenced the parameters of the force-displacement...en_US
uk.file-availabilityV
uk.publication.placeHradec Královécs_CZ
uk.grantorUniverzita Karlova, Farmaceutická fakulta v Hradci Králové, Katedra farmaceutické technologiecs_CZ
dc.identifier.lisID990020909790106986


Soubory tohoto záznamu

Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail

Tento záznam se objevuje v následujících sbírkách

Zobrazit minimální záznam


© 2017 Univerzita Karlova, Ústřední knihovna, Ovocný trh 560/5, 116 36 Praha 1; email: admin-repozitar [at] cuni.cz

Za dodržení všech ustanovení autorského zákona jsou zodpovědné jednotlivé složky Univerzity Karlovy. / Each constituent part of Charles University is responsible for adherence to all provisions of the copyright law.

Upozornění / Notice: Získané informace nemohou být použity k výdělečným účelům nebo vydávány za studijní, vědeckou nebo jinou tvůrčí činnost jiné osoby než autora. / Any retrieved information shall not be used for any commercial purposes or claimed as results of studying, scientific or any other creative activities of any person other than the author.

DSpace software copyright © 2002-2015  DuraSpace
Theme by 
@mire NV