Hledat
Zobrazují se záznamy 1-10 z 11
Study of cooperative dislocation phenomena in solids by the acoustic emission technique
Studium kooperativních dislokačních jevů v pevných látkách metodou akustické emise
Dizertační práce (OBHÁJENO)
Vedoucí práce: Chmelík, František
Datum publikování: 2016
Datum obhajoby: 20. 09. 2016
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Názov práce: Štúdium kooperatívnych dislokačných javov v pevných látkach me- tódou akustickej emisie Autor: Michal KNAPEK Katedra: Katedra fyziky materiálů Školitel': doc. RNDr. František Chmelík, CSc., Katedra fyziky ...
Title: Study of cooperative dislocation phenomena in solids by the acoustic emis- sion technique Author: Michal KNAPEK Department: Department of Physics of Materials Supervisor: doc. RNDr. František Chmelík, CSc., Department ...
Title: Study of cooperative dislocation phenomena in solids by the acoustic emis- sion technique Author: Michal KNAPEK Department: Department of Physics of Materials Supervisor: doc. RNDr. František Chmelík, CSc., Department ...
Studium deformačních procesů v hexagonálnich materiálech
Study of deformation processes in hexagonal materials
Diplomová práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2013
Datum obhajoby: 14. 05. 2013
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Předložená práce se zabývá studiem deformačních mechanismů čistého hořčíku pomocí pokročilých in-situ metod v závislosti na způsobu deformace. Během deformačních zkoušek jsme zaznamenali akustickou emisi a měřili neutronovou ...
The deformation mechanisms of commercially pure magnesium using advanced in-situ methods were investigated in the present work. Compression and tensile test were done at room temperature. Simultaneously, the neutron ...
The deformation mechanisms of commercially pure magnesium using advanced in-situ methods were investigated in the present work. Compression and tensile test were done at room temperature. Simultaneously, the neutron ...
Studium anizotropie tvorby mechanických dvojčat v hořčíkové slitině AZ31
Study of twinning anisotropy of AZ31 magnesium alloy
Diplomová práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2011
Datum obhajoby: 20. 09. 2011
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Předložená práce se zabývá studiem hořčíkové slitiny AZ31 vyrobené metodou horizontálního kontinuálního lití. Analyzuje výsledky deformačních zkoušek v tahu a tlaku, provedených v teplotním rozsahu od 20 řC do 300 řC, ve ...
In the present work the deformation behaviour of magnesium-based alloy AZ31 which was produced by horizontal continual casting is investigated. Samples with two different orientations are deformed in tension and compression ...
In the present work the deformation behaviour of magnesium-based alloy AZ31 which was produced by horizontal continual casting is investigated. Samples with two different orientations are deformed in tension and compression ...
Investigation of basic deformation mechanisms of magnesium alloys by means of advanced in-situ methods and theoretical modeling
Studium základních deformačních mechanismů hořčíkových slitin pomocí pokročilých in-situ metod a teoretického modelování
Dizertační práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2017
Datum obhajoby: 26. 09. 2017
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Práce je zaměřena na výzkum deformačních vlastností polykrystalických hořčíkových slitin. Součástí práce jsou in-situ měření neutronové difrakce a akustické emise a srovnání experimentálních výsledků s teoretickými modely. ...
The work is focused on developing testing methods for investigating of the deformation mechanisms of magnesium alloys. The work involves the measurement of in-situ acoustic emission and neutron diffraction and comparison ...
The work is focused on developing testing methods for investigating of the deformation mechanisms of magnesium alloys. The work involves the measurement of in-situ acoustic emission and neutron diffraction and comparison ...
Study of advanced high strength magnesium alloys by in situ techniques
Studium pokročilých hořčíkových slitin s vysokou pevností pomocí in-situ metod
Dizertační práce (OBHÁJENO)
Vedoucí práce: Dobroň, Patrik
Datum publikování: 2019
Datum obhajoby: 25. 09. 2019
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Hlavním cílem disertační práce bylo stanovení aktivních deformačních mechanismů v moderních hořčíkových slitinách s vysokou pevností s využitím pokročilých in-situ metod umožňující vysoké rozlišení v čase a v prostoru. ...
The aim of the present doctoral thesis was to reveal the active deformation mechanisms in novel high strength magnesium (Mg) alloys using advanced in-situ techniques with high time and space resolutions. The deformation ...
The aim of the present doctoral thesis was to reveal the active deformation mechanisms in novel high strength magnesium (Mg) alloys using advanced in-situ techniques with high time and space resolutions. The deformation ...
Studium deformačních procesů v slitinách Mg-Gd
Investigation of deformation mechanisms in Mg-Gd alloys
Studium deformačních procesů v slitinách Mg-Gd
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2019
Datum obhajoby: 12. 09. 2019
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Název práce: Studium deformačních procesů v slitinách Mg-Gd Autor: Andrea Szabóová Katedra / Ústav: Katedra fyziky materiálů Vedoucí bakalářské práce: doc. RNDr. Kristián Mathis, DrSc. Abstrakt: Předložená práce se zabývá ...
Title: Investigation of deformation mechanisms in Mg-Gd alloys Author: Andrea Szabóová Department: Department of Physics of Materials Supervisor: doc. RNDr. Kristián Mathis, DrSc. Abstract: In the present work, the deformation ...
Title: Investigation of deformation mechanisms in Mg-Gd alloys Author: Andrea Szabóová Department: Department of Physics of Materials Supervisor: doc. RNDr. Kristián Mathis, DrSc. Abstract: In the present work, the deformation ...
Studium deformačních mechanismů v hořčíkové slitině s texturou
Investigation of deformation mechanisms in textured magnesium alloy
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Minárik, Peter
Datum publikování: 2019
Datum obhajoby: 25. 06. 2019
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Název práce: Studium deformačních mechanism· v hořčíkové slitině s texturou Autor: Jan Dittrich Katedra: Katedra fyziky materiál· Vedoucí bakalářské práce: RNDr. Peter Minárik, PhD., Katedra fyziky materiál· Abstrakt: ...
Investigation of residual stresses and deformation mechanisms of magnesium-based composites by means of neutron diffraction and acoustic emission methods
Studium reziduálních napětí a deformačních mechanismů kompozitů na bázi hořčíku pomocí metod neutronové difrakce a akustické emise
Dizertační práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2017
Datum obhajoby: 26. 09. 2017
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Cílem této práce je studium mechanických vlastností kompozitů na bázi hořčíkových slitin (AX41) vyztužené krátkými Saffilovými vláknami. Byly zkoumány dva typy vzorků: s rovinou vlákna rovnoběžnou resp. kolmou na osu ...
The objective of this thesis is to study the mechanical properties of magnesium-based composite (AX41) reinforced by short Saffil fibers. Two type of samples have been investigated: fiber plane parallel respective perpendicular ...
The objective of this thesis is to study the mechanical properties of magnesium-based composite (AX41) reinforced by short Saffil fibers. Two type of samples have been investigated: fiber plane parallel respective perpendicular ...
Studium deformačních mechanismů v nových hořčíkových slitin při jednoosém a nízko cyklovém namáhaní metodou akustické emise
An Acoustic Emission Study of Deformation Mechanisms in Novel Magnesium Alloys at Uniaxial and Low Cyclic Loading
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Dobroň, Patrik
Datum publikování: 2013
Datum obhajoby: 19. 06. 2013
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Práce je zaměřená na získání nových poznatků o vztahu mikrostruktury a deformačních mechanismů v hořčíkových slitinách (Mg) během jednoosého (tah, tlak) a nízko cyklového namáhání za použití metody akustické emise (AE). ...
This work is focused on the study of the relationship between microstructure and deformation mechanisms in magnesium (Mg) alloys during uniaxial (tension, compression) and low cyclic loading by the acoustic emission (AE) ...
This work is focused on the study of the relationship between microstructure and deformation mechanisms in magnesium (Mg) alloys during uniaxial (tension, compression) and low cyclic loading by the acoustic emission (AE) ...
Studium kolektivního chování defektů krystalové mříže metodou akustické emise
Investigation of collective behaviour of lattice defects by the acoustic emission technique
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Dobroň, Patrik
Datum publikování: 2012
Datum obhajoby: 19. 06. 2012
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Portevinův-Le Chatelierův jev je makroskopická, prostorově-časová nestabilita plastické deformace a objevuje se v některých průmyslově důležitých slitinách, např. na bázi železa, hliníku nebo hořčíku, jsou-li tyto materiály ...
The Portevin-Le Chatelier effect is a macroscopic, spatio-temporal instability of plastic deformation. This phenomenon appears in some industrially important metallic alloys, e.g. based on iron, aluminum or magnesium if ...
The Portevin-Le Chatelier effect is a macroscopic, spatio-temporal instability of plastic deformation. This phenomenon appears in some industrially important metallic alloys, e.g. based on iron, aluminum or magnesium if ...