Hledat
Zobrazují se záznamy 1-10 z 23
Studium deformačních procesů v hexagonálnich materiálech
Study of deformation processes in hexagonal materials
Diplomová práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2013
Datum obhajoby: 14. 05. 2013
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Předložená práce se zabývá studiem deformačních mechanismů čistého hořčíku pomocí pokročilých in-situ metod v závislosti na způsobu deformace. Během deformačních zkoušek jsme zaznamenali akustickou emisi a měřili neutronovou ...
The deformation mechanisms of commercially pure magnesium using advanced in-situ methods were investigated in the present work. Compression and tensile test were done at room temperature. Simultaneously, the neutron ...
The deformation mechanisms of commercially pure magnesium using advanced in-situ methods were investigated in the present work. Compression and tensile test were done at room temperature. Simultaneously, the neutron ...
Studium anizotropie tvorby mechanických dvojčat v hořčíkové slitině AZ31
Study of twinning anisotropy of AZ31 magnesium alloy
Diplomová práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2011
Datum obhajoby: 20. 09. 2011
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Předložená práce se zabývá studiem hořčíkové slitiny AZ31 vyrobené metodou horizontálního kontinuálního lití. Analyzuje výsledky deformačních zkoušek v tahu a tlaku, provedených v teplotním rozsahu od 20 řC do 300 řC, ve ...
In the present work the deformation behaviour of magnesium-based alloy AZ31 which was produced by horizontal continual casting is investigated. Samples with two different orientations are deformed in tension and compression ...
In the present work the deformation behaviour of magnesium-based alloy AZ31 which was produced by horizontal continual casting is investigated. Samples with two different orientations are deformed in tension and compression ...
Interakce tokamakového plazmatu s vybranými fúzními materiály
Interaction of tokamak plasma with selected fusion materials
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Janeček, Miloš
Datum publikování: 2012
Datum obhajoby: 19. 06. 2012
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Title: Interaction of tokamak plasma with selected fusion materials Author: Veronika Klevarová Department: Department of Physics of Materials Supervisor: Doc. RNDr. Miloš Janeček, CSc. Supervisor's e-mail address: ...
Název práce: Interakce tokamakového plazmatu s vybranými fúzními materiály Autor: Veronika Klevarová Katedra (ústav): Katedra fyziky materiálů Vedoucí bakalářské práce: Doc. RNDr. Miloš Janeček, CSc. E-mail vedoucího: ...
Název práce: Interakce tokamakového plazmatu s vybranými fúzními materiály Autor: Veronika Klevarová Katedra (ústav): Katedra fyziky materiálů Vedoucí bakalářské práce: Doc. RNDr. Miloš Janeček, CSc. E-mail vedoucího: ...
Mikrostrukturní změny v moderních slitinách titanu
Microstructure changes in modern Ti-based alloys
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Janeček, Miloš
Datum publikování: 2010
Datum obhajoby: 22. 06. 2010
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt nenalezen
Strukturní změny v hliníkových slitinách studované pomocí in-situ transmisní elektronové mikroskopie
Structural changes in aluminium alloys studied by in-situ transmission electron microscopy.
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Cieslar, Miroslav
Datum publikování: 2013
Datum obhajoby: 19. 06. 2013
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Hliníkové slitiny typu 6### jsou hojně využívány v průmyslu. Aby se docílilo jejich optimálních vlastností, musí slitina po odlití před vlastním použitím projít sérií kroků. První z nich je homogenizační žíhání slitiny v ...
Aluminium alloys of the 6### series are widely used in the industry. To achieve the optimal properties, the as-cast alloy must by treated by several steps. The first treating step is the homogenization annealing of the ...
Aluminium alloys of the 6### series are widely used in the industry. To achieve the optimal properties, the as-cast alloy must by treated by several steps. The first treating step is the homogenization annealing of the ...
Studium mechanických a tepelných vlastností kompozitů zpevněné nanočásticemi
Study of mechanical and thermal properties of nanoparticle-reinforced composites
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2014
Datum obhajoby: 17. 06. 2014
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Název práce: Studium mechanických a tepelných vlastností kompozitů zpevněné nanočásticemi Autor: Gergely Németh Katedra: Katedra fyziky materiálů Vedoucí diplomové práce: RNDr. Kristián Máthis, Ph.D. Abstrakt: Předložená ...
Title: Study of mechanical and thermal properties of composites reinforced by nanoparticles Author: Gergely Németh Department: Department of Physics of Materials Supervisor: RNDr. Kristián Máthis, Ph.D. Abstract: In the ...
Title: Study of mechanical and thermal properties of composites reinforced by nanoparticles Author: Gergely Németh Department: Department of Physics of Materials Supervisor: RNDr. Kristián Máthis, Ph.D. Abstract: In the ...
Biokompatibilní beta slitiny titanu zpevněné kyslíkem
Oxygen-strengthened biomedical beta titanium alloys
Diplomová práce (OBHÁJENO)
Vedoucí práce: Stráský, Josef
Datum publikování: 2018
Datum obhajoby: 06. 06. 2018
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Biokompatibilní beta slitiny titanu zpevněné kyslíkem Beta-Ti slitina Ti-35Nb-6Ta-7Zr-0.7O (hm. %) vykazuje nízký modul pružnosti a vysokou pevnost díky intesticiálnímu zpevnění kyslíkem. Tyto mechanické vlastnosti jsou ...
Oxygen strengthened biomedical beta titanium alloys Beta titanium alloy Ti-35Nb-6Ta-7Zr-0.7O (wt. %) exhibits a low Young's modulus and high strength thanks to interstitial strengthening effect of oxygen. These mechanical ...
Oxygen strengthened biomedical beta titanium alloys Beta titanium alloy Ti-35Nb-6Ta-7Zr-0.7O (wt. %) exhibits a low Young's modulus and high strength thanks to interstitial strengthening effect of oxygen. These mechanical ...
Studium deformačních mechanismů v hořčíkové slitině s texturou
Investigation of deformation mechanisms in textured magnesium alloy
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Minárik, Peter
Datum publikování: 2019
Datum obhajoby: 25. 06. 2019
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Název práce: Studium deformačních mechanism· v hořčíkové slitině s texturou Autor: Jan Dittrich Katedra: Katedra fyziky materiál· Vedoucí bakalářské práce: RNDr. Peter Minárik, PhD., Katedra fyziky materiál· Abstrakt: ...
Mechanické vlastnosti ultrajemnozrnných hořčíkových slitin
Mechanical properties of ultrafine-grained magnesium alloys
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Stráská, Jitka
Datum publikování: 2014
Datum obhajoby: 09. 09. 2014
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Tato práce je zaměřena na studium mechanických vlastností ultrajemnozrnné hořčíkové slitiny AZ31 připravené metodou EX-ECAP, zejména na možnost dosažení superplastické deformace v závislosti na vnějších podmínkách. Mechanické ...
This work is focused on the mechanical properties of ultrafine-grained magnesium alloy AZ31 prepared by EX-ECAP method. The main goal of the bachelor thesis is to find external conditions of superplastic deformation: ...
This work is focused on the mechanical properties of ultrafine-grained magnesium alloy AZ31 prepared by EX-ECAP method. The main goal of the bachelor thesis is to find external conditions of superplastic deformation: ...
Studium deformačních mechanismů v nových hořčíkových slitin při jednoosém a nízko cyklovém namáhaní metodou akustické emise
An Acoustic Emission Study of Deformation Mechanisms in Novel Magnesium Alloys at Uniaxial and Low Cyclic Loading
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Dobroň, Patrik
Datum publikování: 2013
Datum obhajoby: 19. 06. 2013
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Práce je zaměřená na získání nových poznatků o vztahu mikrostruktury a deformačních mechanismů v hořčíkových slitinách (Mg) během jednoosého (tah, tlak) a nízko cyklového namáhání za použití metody akustické emise (AE). ...
This work is focused on the study of the relationship between microstructure and deformation mechanisms in magnesium (Mg) alloys during uniaxial (tension, compression) and low cyclic loading by the acoustic emission (AE) ...
This work is focused on the study of the relationship between microstructure and deformation mechanisms in magnesium (Mg) alloys during uniaxial (tension, compression) and low cyclic loading by the acoustic emission (AE) ...