Hledat
Zobrazují se záznamy 1-10 z 10
Studium inverzního katalyzátoru CeOx / Rhodium
Study of CeOx / Rh inverse catalyst
Diplomová práce (OBHÁJENO)
Vedoucí práce: Nehasil, Václav
Datum publikování: 2013
Datum obhajoby: 17. 05. 2013
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Název práce: Studium inverzního katalyzátoru CeOX / Rhodium Autor: Bc. Miroslav Kettner Katedra / Ústav: Katedra fyziky povrchů a plazmatu Vedoucí diplomové práce: doc. RNDr. Václav Nehasil, Dr., Katedra fyziky povrchů a ...
Title: Study of CeOX / Rh inverse catalyst Author: Bc. Miroslav Kettner Department: Department of Surface and Plasma Science Supervisor: doc. RNDr. Václav Nehasil, Dr., Department of Surface and Plasma Science Abstract: ...
Title: Study of CeOX / Rh inverse catalyst Author: Bc. Miroslav Kettner Department: Department of Surface and Plasma Science Supervisor: doc. RNDr. Václav Nehasil, Dr., Department of Surface and Plasma Science Abstract: ...
Příprava a studium katalytického systému Cu(O)-CeO2 metodami povrchové analýzy
The preparation and study of catalytic system Cu(O)-CeO2 using surface analytical methods
Rigorózní práce (UZNÁNO)
Datum publikování: 2013
Datum obhajoby: 20. 11. 2013
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Název práce: Příprava a studium katalytického systému Cu(O)-CeO2 metodami povrchové analýzy Autor: Břetislav Šmíd Katedra: Katedra fyziky povrchů a plazmatu Vedoucí doktorské práce: Doc. Mgr. Iva Matolínová, Dr. Abstrakt: ...
Title: The preparation and study of catalytic system Cu(O)-CeO2 using surface analytical methods Author: Břetislav Šmíd Department: Department of Surface and Plasma Science Supervisor of the doctoral thesis: Doc. Mgr. Iva ...
Title: The preparation and study of catalytic system Cu(O)-CeO2 using surface analytical methods Author: Břetislav Šmíd Department: Department of Surface and Plasma Science Supervisor of the doctoral thesis: Doc. Mgr. Iva ...
Studium strukturních vlastností modelových katalyzátorů na bázi oxidu ceru
Study of the structural properties of model ceria based catalysts
Rigorózní práce (UZNÁNO)
Datum publikování: 2015
Datum obhajoby: 22. 09. 2015
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Tato práce se zabývá studiem struktury modelových katalyzátorů na bázi oxidu ceru metodami elektronové difrakce RHEED a fotoelektronové spektroskopie XPS. V práci je detailně popsán vliv depozičních podmínek a typu substrátu ...
This work is concerning the study of model ceria based calalysts structure by methods of electron diffraction RHEED and photoelectron spectroscopy XPS. The influence of deposition conditions and substrate on the growth of ...
This work is concerning the study of model ceria based calalysts structure by methods of electron diffraction RHEED and photoelectron spectroscopy XPS. The influence of deposition conditions and substrate on the growth of ...
Studium strukturních vlastností modelových katalyzátorů na bázi oxidu ceru
Study of the structural properties of model ceria based catalysts
Dizertační práce (OBHÁJENO)
Vedoucí práce: Mašek, Karel
Datum publikování: 2015
Datum obhajoby: 25. 06. 2015
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Tato práce se zabývá studiem struktury modelových katalyzátorů na bázi oxidu ceru metodami elektronové difrakce RHEED a fotoelektronové spektroskopie XPS. V práci je detailně popsán vliv depozičních podmínek a typu substrátu ...
This work is concerning the study of model ceria based calalysts structure by methods of electron diffraction RHEED and photoelectron spectroscopy XPS. The influence of deposition conditions and substrate on the growth of ...
This work is concerning the study of model ceria based calalysts structure by methods of electron diffraction RHEED and photoelectron spectroscopy XPS. The influence of deposition conditions and substrate on the growth of ...
Morfologie modelových katalyzátorů v prostředí elektrolytu
Morphology of model catalysts in electrolyte environment
Diplomová práce (OBHÁJENO)
Vedoucí práce: Mysliveček, Josef
Datum publikování: 2016
Datum obhajoby: 14. 09. 2016
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Předmětem práce je příprava inverzního modelového katalyzátoru CeOx/Pt(111) a jeho studium kombinací metod povrchové fyziky a elektrochemie. Pro elektrochemická měření byla navržena a zkousntruována nová elektrochemická ...
The aim of this thesis is preparation of inverse model catalyst CeOx/Pt(111) and its investigation using combination of surface physics methods and electrochemistry. New electrochemical cell was designed and built for ...
The aim of this thesis is preparation of inverse model catalyst CeOx/Pt(111) and its investigation using combination of surface physics methods and electrochemistry. New electrochemical cell was designed and built for ...
Studium 3-fázových katalytických vrstev pro polymerní palivové články a elektrolyzéry
Study of 3-phase catalytic layers for polymer electrolyte fuel cells and electrolysers
Diplomová práce (OBHÁJENO)
Vedoucí práce: Matolínová, Iva
Datum publikování: 2017
Datum obhajoby: 08. 06. 2017
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Název práce: Studium 3-fázových katalytických vrstev pro polymerní palivové články a elektrolyzéry Autor: Šimon Fuka Katedra / Ústav: Katedra fyziky povrchů a plazmatu Vedoucí diplomové práce: doc. Mgr. Iva Matolínová, ...
Title: Study of 3-phase catalytic layers for polymer electrolyte fuel cells and electrolysers Author: Šimon Fuka Department: Department of Surface and Plasma Science Supervisor: doc. Mgr. Iva Matolínová, Dr., Department ...
Title: Study of 3-phase catalytic layers for polymer electrolyte fuel cells and electrolysers Author: Šimon Fuka Department: Department of Surface and Plasma Science Supervisor: doc. Mgr. Iva Matolínová, Dr., Department ...
Studium nových katalytických materiálů pro palivové články s polymerní membránou
Study of new catalytic materials for proton exchange membrane fuel cells
Diplomová práce (OBHÁJENO)
Vedoucí práce: Matolín, Vladimír
Datum publikování: 2012
Datum obhajoby: 18. 05. 2012
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Název práce: Studium nových katalytických materiálů pro palivové články s po- lymerní membránou Autor: Petr Homola Katedra: Katedra fyziky povrchů a plazmatu Vedoucí diplomové práce: Prof. RNDr. Vladimír Matolín, DrSc. ...
Title: Study of new catalytic materials for proton exchange membrane fuel cells Author: Petr Homola Department: Department of Surface and Plasma Science Supervisor: Prof. RNDr. Vladimír Matolín, DrSc. Abstract: Submitted ...
Title: Study of new catalytic materials for proton exchange membrane fuel cells Author: Petr Homola Department: Department of Surface and Plasma Science Supervisor: Prof. RNDr. Vladimír Matolín, DrSc. Abstract: Submitted ...
Fyzikálně-chemické vlastnosti epitaxních vrstev CeO2/Cu(110)
Physically chemical properties of epitaxial films CeO2/Cu(110)
Diplomová práce (OBHÁJENO)
Vedoucí práce: Veltruská, Kateřina
Datum publikování: 2012
Datum obhajoby: 18. 05. 2012
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: V rámci této práce byly zkoumány možnosti přípravy tenkých epitaxních vrstev oxidu ceru na povrchu Cu(110). K charakterizaci připravených systémů byly použity metody rentgenová fotoelektronová spektroskopie (XPS), úhlově ...
In this work ways of preparation of thin epitaxial cerium oxide film on Cu(110) surface were studied. X-ray photoelectron spectroscopy (XPS), X-ray photoelectron difraction (XPD), low energy electron difraction (LEED), ion ...
In this work ways of preparation of thin epitaxial cerium oxide film on Cu(110) surface were studied. X-ray photoelectron spectroscopy (XPS), X-ray photoelectron difraction (XPD), low energy electron difraction (LEED), ion ...
Příprava a studium katalytického systému Cu(O)-CeO2 metodami povrchové analýzy
The preparation and study of catalytic system Cu(O)-CeO2 using surface analytical methods
Dizertační práce (OBHÁJENO)
Vedoucí práce: Matolínová, Iva
Datum publikování: 2013
Datum obhajoby: 04. 04. 2013
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Title: The preparation and study of catalytic system Cu(O)-CeO2 using surface analytical methods Author: Břetislav Šmíd Department: Department of Surface and Plasma Science Supervisor of the doctoral thesis: Doc. Mgr. Iva ...
Název práce: Příprava a studium katalytického systému Cu(O)-CeO2 metodami povrchové analýzy Autor: Břetislav Šmíd Katedra: Katedra fyziky povrchů a plazmatu Vedoucí doktorské práce: Doc. Mgr. Iva Matolínová, Dr. Abstrakt: ...
Název práce: Příprava a studium katalytického systému Cu(O)-CeO2 metodami povrchové analýzy Autor: Břetislav Šmíd Katedra: Katedra fyziky povrchů a plazmatu Vedoucí doktorské práce: Doc. Mgr. Iva Matolínová, Dr. Abstrakt: ...
Epitaxní vrstvy oxidu ceru pro optoelektroniku
Epitaxial films of ceria for opto- electronics
Diplomová práce (OBHÁJENO)
Vedoucí práce: Mysliveček, Josef
Datum publikování: 2020
Datum obhajoby: 14. 09. 2020
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Tato diplomová práce se zabývá studiem magneto-optické (MO) odezvy epitaxních tenkých vrstev oxidu ceru dopovaných kobaltem. K charakterizaci a studiu vrstev jsou používány metody XPS, LEED, STM, spektroskopická elipsometrie ...
This diploma thesis studies magneto-optical (MO) response of epitaxial thin films of Co-doped ceria. Thin films were characterized by XPS, LEED, STM, spectroscopic ellipsometry and measurement of MO activity. The work ...
This diploma thesis studies magneto-optical (MO) response of epitaxial thin films of Co-doped ceria. Thin films were characterized by XPS, LEED, STM, spectroscopic ellipsometry and measurement of MO activity. The work ...