Hledat
Zobrazují se záznamy 1-10 z 20
Advanced aluminium alloys prepared by powder metallurgy and spark plasma sintering
Moderní hliníkové slitiny připravené práškovou metalurgií a plasmovým sintrováním
Dizertační práce (OBHÁJENO)
Vedoucí práce: Málek, Přemysl
Datum publikování: 2018
Datum obhajoby: 20. 09. 2018
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Mechanické vlastnosti hliníkových slitin velice závisí na jejich fázovém složení a mikrostruktuře. Vysoká pevnost může být dosažena mimo jiné zavedením vysoké objemové frakce jemných, homogenně rozptýlených částic druhé ...
Mechanical properties of aluminium alloys highly depend on their phase composition and microstructure. High strength can be achieved among others by introduction of a high volume fraction of fine, homogeneously distributed ...
Mechanical properties of aluminium alloys highly depend on their phase composition and microstructure. High strength can be achieved among others by introduction of a high volume fraction of fine, homogeneously distributed ...
Study of cooperative dislocation phenomena in solids by the acoustic emission technique
Studium kooperativních dislokačních jevů v pevných látkách metodou akustické emise
Dizertační práce (OBHÁJENO)
Vedoucí práce: Chmelík, František
Datum publikování: 2016
Datum obhajoby: 20. 09. 2016
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Názov práce: Štúdium kooperatívnych dislokačných javov v pevných látkach me- tódou akustickej emisie Autor: Michal KNAPEK Katedra: Katedra fyziky materiálů Školitel': doc. RNDr. František Chmelík, CSc., Katedra fyziky ...
Title: Study of cooperative dislocation phenomena in solids by the acoustic emis- sion technique Author: Michal KNAPEK Department: Department of Physics of Materials Supervisor: doc. RNDr. František Chmelík, CSc., Department ...
Title: Study of cooperative dislocation phenomena in solids by the acoustic emis- sion technique Author: Michal KNAPEK Department: Department of Physics of Materials Supervisor: doc. RNDr. František Chmelík, CSc., Department ...
Studium jemnozrnných materiálů připravovaných metodou intenzivní plastické deformace
Study of ultrafine-grained materials prepared with different methods of severe plastic deformation
Dizertační práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2015
Datum obhajoby: 24. 09. 2015
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Název práce: Studium jemnozrnných materiálů připravovaných metodou intenzivní plastické deformace Autor: RNDr. Tomáš Krajňák Katedra / Ústav: Katedra fyziky materiálů, Matematicko-fyzikální fakulta, UK Vedoucí disertační ...
Title: Study of ultrafine-grained materials prepared with different methods of severe plastic deformation Author: RNDr. Tomáš Krajňák Department: Department of Physics of Materials, Faculty of Mathematics and Physics, ...
Title: Study of ultrafine-grained materials prepared with different methods of severe plastic deformation Author: RNDr. Tomáš Krajňák Department: Department of Physics of Materials, Faculty of Mathematics and Physics, ...
Optimization of properties of Ti based alloys for biomedical and structural applications
Optimalizace vlastností Ti slitin pro biomedicínské a strukturní aplikace
Dizertační práce (OBHÁJENO)
Vedoucí práce: Janeček, Miloš
Datum publikování: 2014
Datum obhajoby: 08. 09. 2014
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Title: Optimization of properties of Ti based alloys for biomedical and structural applications Author: Josef Stráský Department / Institute: Department of Physics of Materials Supervisor of the doctoral thesis: Assoc. ...
Název práce: Optimalizace vlastností Ti slitin pro biomedicínské a strukturní aplikace Autor: Josef Stráský Katedra / Ústav: Katedra fyziky materiálů Vedoucí doktorské práce: Doc. RNDr. Miloš Janeček, CSc. Abstrakt: Slitiny ...
Název práce: Optimalizace vlastností Ti slitin pro biomedicínské a strukturní aplikace Autor: Josef Stráský Katedra / Ústav: Katedra fyziky materiálů Vedoucí doktorské práce: Doc. RNDr. Miloš Janeček, CSc. Abstrakt: Slitiny ...
Komplexní studium jemnozrnných polykrystalů Cu a slitiny CuZr připravených metodami equal channel angular pressing a high pressure torsion
Complex investigation of fine-grained polycrystals of Cu and CuZr alloy processed by equal channel angular pressing a high pressure torsion
Dizertační práce (OBHÁJENO)
Vedoucí práce: Janeček, Miloš
Datum publikování: 2012
Datum obhajoby: 05. 04. 2012
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Title: Complex investigation of fine-grained polycrystals of Cu and CuZr alloy processed by equal channel angular pressing and high pressure torsion Author: RNDr.Ondřej Srba Department: Department of Physics of Materials, ...
Název práce: Komplexní studium jemnozrnných polykrystalů Cu a slitiny CuZr připravených metodami equal channel angular pressing a high pressure torsion Autor: RNDr.Ondřej Srba Katedra (ústav): Katedra fyziky materiálů, ...
Název práce: Komplexní studium jemnozrnných polykrystalů Cu a slitiny CuZr připravených metodami equal channel angular pressing a high pressure torsion Autor: RNDr.Ondřej Srba Katedra (ústav): Katedra fyziky materiálů, ...
Phase transformations in ultra-fine grained titanium alloys
Fázové transformace v ultra-jemnozrnných slitinách titanu
Dizertační práce (OBHÁJENO)
Vedoucí práce: Stráský, Josef
Datum publikování: 2019
Datum obhajoby: 19. 06. 2019
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Název práce: Fázové transformace v ultra-jemnozrnných slitinách titanu Autor: Kristína Bartha Katedra / Ústav: Katedra fyziky materiálů Vedoucí disertační práce: PhDr. RNDr. Josef Stráský, Ph.D., Katedra fyziky materiálů ...
Title: Phase transformations in ultra-fine grained titanium alloys Author: Kristína Bartha Department: Department of Physics of Materials Supervisor of the doctoral thesis: PhDr. RNDr. Josef Stráský, Ph.D., Department of ...
Title: Phase transformations in ultra-fine grained titanium alloys Author: Kristína Bartha Department: Department of Physics of Materials Supervisor of the doctoral thesis: PhDr. RNDr. Josef Stráský, Ph.D., Department of ...
Effect of composition and microstructure on mechanical and corrosion properties in magnesium alloys with a potential for medical applications.
Vliv složení a mikrostruktury na mechanické a korozní charakteristiky v hořčíkových slitinách s potenciálem pro medicínské aplikace.
Dizertační práce (OBHÁJENO)
Vedoucí práce: Král, Robert
Datum publikování: 2014
Datum obhajoby: 22. 09. 2014
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Názov práce: Vplyv zloženia a mikroštruktúry na mechanické a korózne charakteristiky v horčíkových zliatinách s potenciálom pre medicínske aplikácie. Autor: RNDr. Peter MINÁRIK Katedra / Ústav: Katedra fyziky materiálů, ...
Title: Effect of composition and microstructure on mechanical and corrosion properties in magnesium alloys with a potential for medical applications. Author: RNDr. Peter MINÁRIK Department / Institute: Department of Physics ...
Title: Effect of composition and microstructure on mechanical and corrosion properties in magnesium alloys with a potential for medical applications. Author: RNDr. Peter MINÁRIK Department / Institute: Department of Physics ...
Investigation of basic deformation mechanisms of magnesium alloys by means of advanced in-situ methods and theoretical modeling
Studium základních deformačních mechanismů hořčíkových slitin pomocí pokročilých in-situ metod a teoretického modelování
Dizertační práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2017
Datum obhajoby: 26. 09. 2017
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Práce je zaměřena na výzkum deformačních vlastností polykrystalických hořčíkových slitin. Součástí práce jsou in-situ měření neutronové difrakce a akustické emise a srovnání experimentálních výsledků s teoretickými modely. ...
The work is focused on developing testing methods for investigating of the deformation mechanisms of magnesium alloys. The work involves the measurement of in-situ acoustic emission and neutron diffraction and comparison ...
The work is focused on developing testing methods for investigating of the deformation mechanisms of magnesium alloys. The work involves the measurement of in-situ acoustic emission and neutron diffraction and comparison ...
Physical and mechanical properties of lead-free solder joints
Fyzikální a mechanické vlastnosti spojů pájených bezolovnatými pájkami
Dizertační práce (OBHÁJENO)
Vedoucí práce: Janeček, Miloš
Datum publikování: 2016
Datum obhajoby: 21. 09. 2016
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Title: Physical and mechanical properties of lead-free solder joints Author: Petr Harcuba Department: Department of Physics of Materials Supervisor: prof. RNDr. Miloš Janeček, CSc., Department of Physics of Materials ...
Název práce: Fyzikální a mechanické vlastnosti spojů pájených bezolovnatými pájkami Autor: Petr Harcuba Katedra: Katedra fyziky materiálů Vedoucí doktorské práce: prof. RNDr. Miloš Janeček, CSc., Katedra fyziky materiálů ...
Název práce: Fyzikální a mechanické vlastnosti spojů pájených bezolovnatými pájkami Autor: Petr Harcuba Katedra: Katedra fyziky materiálů Vedoucí doktorské práce: prof. RNDr. Miloš Janeček, CSc., Katedra fyziky materiálů ...
Study of advanced high strength magnesium alloys by in situ techniques
Studium pokročilých hořčíkových slitin s vysokou pevností pomocí in-situ metod
Dizertační práce (OBHÁJENO)
Vedoucí práce: Dobroň, Patrik
Datum publikování: 2019
Datum obhajoby: 25. 09. 2019
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Hlavním cílem disertační práce bylo stanovení aktivních deformačních mechanismů v moderních hořčíkových slitinách s vysokou pevností s využitím pokročilých in-situ metod umožňující vysoké rozlišení v čase a v prostoru. ...
The aim of the present doctoral thesis was to reveal the active deformation mechanisms in novel high strength magnesium (Mg) alloys using advanced in-situ techniques with high time and space resolutions. The deformation ...
The aim of the present doctoral thesis was to reveal the active deformation mechanisms in novel high strength magnesium (Mg) alloys using advanced in-situ techniques with high time and space resolutions. The deformation ...