Voltametrické stanovení 5-nitrobenzimidazolu za využití netradičních elektrodových materiálů
Voltammetric Determination of 5-Nitrobenzimidazole Using Non-Traditional Electrode Materials
diploma thesis (DEFENDED)
View/ Open
Permanent link
http://hdl.handle.net/20.500.11956/43137Identifiers
Study Information System: 100367
Collections
- Kvalifikační práce [19614]
Author
Advisor
Consultant
Barek, Jiří
Referee
Zima, Jiří
Faculty / Institute
Faculty of Science
Discipline
Clinical and Toxicological Analysis
Department
Department of Analytical Chemistry
Date of defense
28. 5. 2012
Publisher
Univerzita Karlova, Přírodovědecká fakultaLanguage
Czech
Grade
Very good
Keywords (Czech)
5-nitrobenzimidazol, stříbrná amalgamová pastová elektroda, bismutová filmová elektroda, elektroda ze skelného uhlíku, DC voltametrie, diferenční pulsní voltametrie, modelové vzorky pitné a říční vodyKeywords (English)
5-Nitrobenzimidazole, Silver Amalgam Paste Electrode, Bismuth Film Electrode, Glassy Carbon Electrode, DC Voltammetry, Differential Pulse Voltammetry, Model Samples of Drinking and River Water4 Abstrakt Tato diplomová práce se zabývá stanovením 5-nitrobenzimidazolu (5-NBIA) metodami DC voltametrií (DCV) a diferenční pulsní voltametrií (DPV). Jako pracovní elektrody byly použity stříbrná amalgamová pastová elektroda (AgA-PE), která byla pro toto stanovení zkonstruovaná ve formě nového prototypu, dále bismutová filmová elektroda (BiFE), u které byly na počátku optimalizovány podmínky pro depozici filmu bismutu na podkladovou elektrodu (za tímto účelem byla testována elektroda ze skelného uhlíku a zlatá elektroda), a elektroda ze skelného uhlíku (GCE). Byly nalezeny optimální podmínky pro voltametrické stanovení 5-NBIA na AgA-PE (prostředí Brittonova-Robinsonova pufru (BR-pufru) o pH 7,0 pro DCV i DPV), BiFE se zlatou podkladovou elektrodou (prostředí BR-pufru o pH 9,0 pro DCV i DPV; film deponován "ex situ" v míchaném roztoku 1000 mg L-1 Bi3+ iontů v 0,1 mol L-1 acetátovém pufru o pH 4,5 po dobu 300 s), GCE (prostředí BR-pufru o pH 5,0 pro DCV i DPV) a za těchto podmínek byly proměřeny kalibrační závislosti v koncentračních rozmezích 0,1 - 100 µmol L-1 (pro DCV a DPV na AgA-PE) a 1 - 100 µmol L-1 (pro DCV a DPV na BiFE a GCE) a vypočteny meze stanovitelnosti (LQ) pro jednotlivé metody: LQ ≈ 1,2 µmol L-1 (DCV i DPV na AgA-PE), 0,54 µmol L-1 (DCV na BiFE), 2,0 µmol L-1 (DPV na BiFE), 0,8 µmol L-1...
5 Abstract This Diploma Thesis is targeted on the determination of 5-nitrobenzimidazole (5-NBIA) using following techniques: DC voltammetry (DCV) and differential pulse voltammetry (DPV). As working electrodes, a silver amalgam paste electrode (AgA-PE), which was constructed for this determination in the form of a new prototype, a bismuth film electrode (BiFE), at which the optimum conditions for the deposition of the bismuth film at a suitable substrate (glassy carbon electrode and gold electrode were tested for this purpose) were initially optimized, and a glassy carbon electrode (GCE) were used. The optimum conditions for the voltammetric determination of 5-NBIA at the AgA-PE (in a medium of Britton-Robinson buffer (BR-buffer) of pH 7.0 for both DCV and DPV), at the BiFE with gold substrate (BR-buffer of pH 9.0 for both DCV and DPV; the film was deposited "ex situ" in a stirred plating solution (1000 mg L-1 Bi(III) solution in 0.1 mol L-1 acetate buffer of pH 4.5) for 300 s), and at the GCE (BR-buffer of pH 5,0 for both DCV and DPV). Under these conditions, calibration dependences were measured in the concentration ranges of 0.1 - 100 µmol L-1 (pro DCV a DPV na AgA-PE) and 1 - 100 µmol L-1 (pro DCV a DPV na BiFE a GCE), and the limits of quantification (LQs) were calculated for particular methods: LQ ≈...