dc.contributor.advisor | Janeček, Miloš | |
dc.creator | Srba, Ondřej | |
dc.date.accessioned | 2018-11-30T11:22:05Z | |
dc.date.available | 2018-11-30T11:22:05Z | |
dc.date.issued | 2012 | |
dc.identifier.uri | http://hdl.handle.net/20.500.11956/47523 | |
dc.description.abstract | Title: Complex investigation of fine-grained polycrystals of Cu and CuZr alloy processed by equal channel angular pressing and high pressure torsion Author: RNDr.Ondřej Srba Department: Department of Physics of Materials, Faculty of Mathematics and Physics, Charles University Prague Supervisor: Doc. RNDr. Miloš Janeček, CSc. Abstract: In the thesis the microstructure development, mechanical, elastic and corrosion properties of deformed specimens of pure Cu and binary alloy CuZr processed by equal channel angular pressing (ECAP) are investigated. Several properties of pure Cu processed by ECAP are compared with properties of the same material processed by high pressure torsion (HPT). The microstructure development is characterized in detail by several experimental techniques (light and electron microscopy, electron back scatter diffraction, positron annihilation spectroscopy, etc.). The microstructure development in specimens processed by ECAP is characterized by the continuous fragmentation of the initial coarse grain structure and the formation of new grains having the sizes in the submicrocrystalline range (of 460 nm and 260 nm in Cu and CuZr alloy, respectively). During the deformation by ECAP the fraction of high-angle grain boundaries, the dislocation density and the concentration of vacancies are... | en_US |
dc.description.abstract | Název práce: Komplexní studium jemnozrnných polykrystalů Cu a slitiny CuZr připravených metodami equal channel angular pressing a high pressure torsion Autor: RNDr.Ondřej Srba Katedra (ústav): Katedra fyziky materiálů, Matematicko-fyzikální fakulta Univerzity Karlovy Vedoucí diplomové práce: Doc. RNDr. Miloš Janeček, CSc Abstrakt: Předkládaná disertační práce se zabývá studiem vývoje mikrostruktury, mechanických, elastických a korozních vlastností čisté Cu a slitiny CuZr, které byly připraveny metodou equal channel angular pressing (ECAP). Vybrané vlastnosti čisté Cu připravené metodou ECAP jsou porovnány s vlastnostmi čisté Cu připravené metodou high pressure torsion (HPT). Vývoj mikrostruktury je podrobně charakterizován mnoha experimentálními metodami (světelná a elektronová mikroskopie, difrakce zpětně odražených elektronů, pozitronová anihilační spektroskopie, atd). Vývoj mikrostruktury ve vzorcích připravených metodou ECAP lze charakterizovat postupným rozpadem původní hrubozrnné struktury a vznikem nových zrn v submikrokrystalickém oboru (460 nm u Cu a 260 nm u slitiny CuZr). Během deformace postupně roste podíl vysokoúhlových hranic zrn, hustota dislokací (ρD ≈ 7 x 1015 m-2 ) a koncentrace vakancí (cV ≈ 10-4 at-1 ). Byla zjištěna souvislost mezi stupněm vložené deformace metodou ECAP a anizotropií... | cs_CZ |
dc.language | Čeština | cs_CZ |
dc.language.iso | cs_CZ | |
dc.publisher | Univerzita Karlova, Matematicko-fyzikální fakulta | cs_CZ |
dc.subject | fine-grained material | en_US |
dc.subject | CuZr | en_US |
dc.subject | ECAP | en_US |
dc.subject | HPT | en_US |
dc.subject | microstructure development | en_US |
dc.subject | jemnozrnný materiál | cs_CZ |
dc.subject | CuZr ,metoda ECAP | cs_CZ |
dc.subject | metoda HPT | cs_CZ |
dc.subject | vývoj mikrostruktury | cs_CZ |
dc.title | Komplexní studium jemnozrnných polykrystalů Cu a slitiny CuZr připravených metodami equal channel angular pressing a high pressure torsion | cs_CZ |
dc.type | dizertační práce | cs_CZ |
dcterms.created | 2012 | |
dcterms.dateAccepted | 2012-04-05 | |
dc.description.department | Katedra fyziky materiálů | cs_CZ |
dc.description.department | Department of Physics of Materials | en_US |
dc.description.faculty | Faculty of Mathematics and Physics | en_US |
dc.description.faculty | Matematicko-fyzikální fakulta | cs_CZ |
dc.identifier.repId | 44643 | |
dc.title.translated | Complex investigation of fine-grained polycrystals of Cu and CuZr alloy processed by equal channel angular pressing a high pressure torsion | en_US |
dc.contributor.referee | Hadzima, Branislav | |
dc.contributor.referee | Karlík, Miroslav | |
dc.identifier.aleph | 001452800 | |
thesis.degree.name | Ph.D. | |
thesis.degree.level | doktorské | cs_CZ |
thesis.degree.discipline | Fyzika kondenzovaných látek a materiálový výzkum | cs_CZ |
thesis.degree.discipline | Physics of Condensed Matter and Materials Research | en_US |
thesis.degree.program | Physics | en_US |
thesis.degree.program | Fyzika | cs_CZ |
uk.thesis.type | dizertační práce | cs_CZ |
uk.taxonomy.organization-cs | Matematicko-fyzikální fakulta::Katedra fyziky materiálů | cs_CZ |
uk.taxonomy.organization-en | Faculty of Mathematics and Physics::Department of Physics of Materials | en_US |
uk.faculty-name.cs | Matematicko-fyzikální fakulta | cs_CZ |
uk.faculty-name.en | Faculty of Mathematics and Physics | en_US |
uk.faculty-abbr.cs | MFF | cs_CZ |
uk.degree-discipline.cs | Fyzika kondenzovaných látek a materiálový výzkum | cs_CZ |
uk.degree-discipline.en | Physics of Condensed Matter and Materials Research | en_US |
uk.degree-program.cs | Fyzika | cs_CZ |
uk.degree-program.en | Physics | en_US |
thesis.grade.cs | Prospěl/a | cs_CZ |
thesis.grade.en | Pass | en_US |
uk.abstract.cs | Název práce: Komplexní studium jemnozrnných polykrystalů Cu a slitiny CuZr připravených metodami equal channel angular pressing a high pressure torsion Autor: RNDr.Ondřej Srba Katedra (ústav): Katedra fyziky materiálů, Matematicko-fyzikální fakulta Univerzity Karlovy Vedoucí diplomové práce: Doc. RNDr. Miloš Janeček, CSc Abstrakt: Předkládaná disertační práce se zabývá studiem vývoje mikrostruktury, mechanických, elastických a korozních vlastností čisté Cu a slitiny CuZr, které byly připraveny metodou equal channel angular pressing (ECAP). Vybrané vlastnosti čisté Cu připravené metodou ECAP jsou porovnány s vlastnostmi čisté Cu připravené metodou high pressure torsion (HPT). Vývoj mikrostruktury je podrobně charakterizován mnoha experimentálními metodami (světelná a elektronová mikroskopie, difrakce zpětně odražených elektronů, pozitronová anihilační spektroskopie, atd). Vývoj mikrostruktury ve vzorcích připravených metodou ECAP lze charakterizovat postupným rozpadem původní hrubozrnné struktury a vznikem nových zrn v submikrokrystalickém oboru (460 nm u Cu a 260 nm u slitiny CuZr). Během deformace postupně roste podíl vysokoúhlových hranic zrn, hustota dislokací (ρD ≈ 7 x 1015 m-2 ) a koncentrace vakancí (cV ≈ 10-4 at-1 ). Byla zjištěna souvislost mezi stupněm vložené deformace metodou ECAP a anizotropií... | cs_CZ |
uk.abstract.en | Title: Complex investigation of fine-grained polycrystals of Cu and CuZr alloy processed by equal channel angular pressing and high pressure torsion Author: RNDr.Ondřej Srba Department: Department of Physics of Materials, Faculty of Mathematics and Physics, Charles University Prague Supervisor: Doc. RNDr. Miloš Janeček, CSc. Abstract: In the thesis the microstructure development, mechanical, elastic and corrosion properties of deformed specimens of pure Cu and binary alloy CuZr processed by equal channel angular pressing (ECAP) are investigated. Several properties of pure Cu processed by ECAP are compared with properties of the same material processed by high pressure torsion (HPT). The microstructure development is characterized in detail by several experimental techniques (light and electron microscopy, electron back scatter diffraction, positron annihilation spectroscopy, etc.). The microstructure development in specimens processed by ECAP is characterized by the continuous fragmentation of the initial coarse grain structure and the formation of new grains having the sizes in the submicrocrystalline range (of 460 nm and 260 nm in Cu and CuZr alloy, respectively). During the deformation by ECAP the fraction of high-angle grain boundaries, the dislocation density and the concentration of vacancies are... | en_US |
uk.file-availability | V | |
uk.publication.place | Praha | cs_CZ |
uk.grantor | Univerzita Karlova, Matematicko-fyzikální fakulta, Katedra fyziky materiálů | cs_CZ |
thesis.grade.code | P | |
dc.identifier.lisID | 990014528000106986 | |