Hledat
Zobrazují se záznamy 51-60 z 68
Transmission Electron Microscopy of Al-Mg Aluminium Alloys with Addition of Sc and Zr
Transmisní elektronová mikroskopie hliníkových slitin Al-Mg s přídavkem Sc a Zr
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Šlapáková, Michaela
Datum publikování: 2019
Datum obhajoby: 25. 06. 2019
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Abstract. The microstructure and its evolution during isochronal annealing of a twin roll cast Al-3.2Mg-0.19Sc-0.14Zr (wt.%) alloy was investigated by light optical microscopy and electron microscopy. Two procedures - equal ...
Abstrakt. Mikrostruktura hliníkové slitiny Al-3.2Mg-0.19Sc-0.14Zr (hm.%) připravené metodou plynulého odlévání mezi válce byla studována pomocí světelné a elektronové mikroskopie. Materiál byl podroben isotermickému žíhání ...
Abstrakt. Mikrostruktura hliníkové slitiny Al-3.2Mg-0.19Sc-0.14Zr (hm.%) připravené metodou plynulého odlévání mezi válce byla studována pomocí světelné a elektronové mikroskopie. Materiál byl podroben isotermickému žíhání ...
Thermophysical and electrical properties of illite-based ceramics
Termofyzikálne a elektrické vlastnosti keramík na báze illitu
Dizertační práce (OBHÁJENO)
Vedoucí práce: Dobroň, Patrik
Datum publikování: 2018
Datum obhajoby: 23. 08. 2018
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: CSÁKI, Štefan: Termofyzikálne a elektrické vlastnosti keramík na báze illitu [Dizertačná práca]. Univerzita Konšntantína Filozofa v Nitre, Fakulta Prírodných vied. Univerzita Karlova. Matematicko-fyzikální fakulta. Školiteľ: ...
CSÁKI, Štefan: Thermophysical and electrical properties of illite-based ceramics. [Doctoral thesis]. Constantine the Philosopher University in Nitra. Faculty of Natural Sciences. Charles University. Faculty of Mathematics ...
CSÁKI, Štefan: Thermophysical and electrical properties of illite-based ceramics. [Doctoral thesis]. Constantine the Philosopher University in Nitra. Faculty of Natural Sciences. Charles University. Faculty of Mathematics ...
Vliv mikrostrukturních parametrů na mechanické vlastnosti polykrystalického hořčíku
Dependence of mechanical properties of polycrystalline magnesium on microstructural parameters
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2011
Datum obhajoby: 23. 06. 2011
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Předložená práce se zabývá studiem deformace vzorků čistého hořčíku s různými velikostmi zrna v závislosti na teplotě a způsobu deformace. Deformace v tahu a tlaku jsou prováděny na 3 různých vzorcích lišících se velikostí ...
The deformation of commercially pure magnesium with various grain size in different temperatures is investigated in the present work. Compression and tensile test were done on three different samples in temperature range ...
The deformation of commercially pure magnesium with various grain size in different temperatures is investigated in the present work. Compression and tensile test were done on three different samples in temperature range ...
Magnesium alloys designed for medical applications
Slitiny hořčíku určené pro lékařské aplikace
Diplomová práce (OBHÁJENO)
Vedoucí práce: Minárik, Peter
Datum publikování: 2018
Datum obhajoby: 06. 06. 2018
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Názov: Slitiny hořčíku určené pro lékařské aplikace Author: Mária Zemková Abstract: Táto Diplomová práca sa venuje vplyvu termomechanického spracovania, konkrétne horúcou extrúziou a pretláčaním cez lomený kanál (ECAP), ...
Title: Magnesium alloys designed for medical applications Author: Mária Zemková Abstract: This Master thesis is focused on the influence of hot extrusion and equal channel angular pressing (ECAP) on the microstructure, ...
Title: Magnesium alloys designed for medical applications Author: Mária Zemková Abstract: This Master thesis is focused on the influence of hot extrusion and equal channel angular pressing (ECAP) on the microstructure, ...
Vliv příměsových prvků a textury na plastickou deformaci protlačovaných hořčíkových slitin
Vliv příměsových prvků a textury na plastickou deformaci protlačovaných hořčíkových slitin
Diplomová práce (OBHÁJENO)
Vedoucí práce: Dobroň, Patrik
Datum publikování: 2015
Datum obhajoby: 10. 06. 2015
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Práce je zaměřena na získání nových poznatků o vztahu mikrostruktury, textury a deformačních mechanismů v hořčíkových slitinách (Mg) bez příměsi hliníku. Slitiny s příměsí zirkonia, zinku, manganu a neodymu (ZK10, MN11, ...
This work is focused on the study of the relationship between microstructure, texture and deformation mechanisms in aluminum-free magnesium (Mg) alloys. Extruded alloys containing zirconium, zinc, manganese and neodymium ...
This work is focused on the study of the relationship between microstructure, texture and deformation mechanisms in aluminum-free magnesium (Mg) alloys. Extruded alloys containing zirconium, zinc, manganese and neodymium ...
Studium vlastností titanu připraveného metodami intenzivní plastické deformace
Study of properties of Titanium prepared by SPD methods
Bakalářská práce (OBHÁJENO)
Vedoucí práce: Harcuba, Petr
Datum publikování: 2013
Datum obhajoby: 19. 06. 2013
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: V předložené práci byly studovány vlastnosti komerčně čistého titanu čtvrté jakostní třídy připraveného metodou equal channel angular pressing (ECAP). Experimentální studium probíhalo pomocí měření mikrotvrdosti, elektrického ...
In present work the properties of comercially pure titanium fouth grade processed by equal channel angular pressing (ECAP) were studied. Experimental techniques such as Vickers microhardness, measurement of electrical ...
In present work the properties of comercially pure titanium fouth grade processed by equal channel angular pressing (ECAP) were studied. Experimental techniques such as Vickers microhardness, measurement of electrical ...
Výzkum deformačních mechanismů pokročilých lehkých slitin
Investigation of deformation mechanisms of advanced light-weight alloys
Diplomová práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2016
Datum obhajoby: 12. 09. 2016
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Cílem této diplomové práce je prozkoumat mechanické a tlumící vlastnosti slitin AZ91 s přidáním různého množství legujícího prvku bor a dvou experimentálních slitin na bázi čistého hořčíku. Dalším úkolem je určit vliv ...
The objective of this thesis is to investigate the mechanical and damping properties in AZ91 alloys with different boron concentrations and in two experimental alloys based on commercial pure magnesium. Further aim is to ...
The objective of this thesis is to investigate the mechanical and damping properties in AZ91 alloys with different boron concentrations and in two experimental alloys based on commercial pure magnesium. Further aim is to ...
Superplastic deformation of ultrafine-grained magnesium alloys containing rare earth metals and zinc
Superplastická deformace ultrajemnozrnných hořčíkových slitin s obsahem vzácných zemin a zinku
Diplomová práce (OBHÁJENO)
Vedoucí práce: Minárik, Peter
Datum publikování: 2019
Datum obhajoby: 19. 06. 2019
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Tématem této práce byla Superplastická deformace hořčíkových slitin. Komerční slitina Mg- 4Y-3RE (wt.%) připravená metodou ECAP a experimentální slitina Mg-23Zn-2Y (wt.%) byla připravená pomocí extruze a ECAP. Byla dosažena ...
Superplastic behavior of two ultrafine-grained (UFG) magnesium alloys was investigated in this thesis. Commercial Mg-4Y-3RE (wt.%) alloy was prepared by equal channel angular pressing (ECAP) and new experimental alloy ...
Superplastic behavior of two ultrafine-grained (UFG) magnesium alloys was investigated in this thesis. Commercial Mg-4Y-3RE (wt.%) alloy was prepared by equal channel angular pressing (ECAP) and new experimental alloy ...
Effect of microstructure on mechanisms of plastic deformation in fine-grained magnesium alloys
Vliv mikrostruktury na mechanismy plastické deformace v jemnozrnných hořčíkových slitinách
Diplomová práce (OBHÁJENO)
Vedoucí práce: Král, Robert
Datum publikování: 2010
Datum obhajoby: 17. 05. 2010
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Táto práca sa zaoberá štúdiom vplyvu zjemnenia zrna na mechanické vlastnosti a koroziodolnosť horčíkových zliatin potenciálnych pre použitie v medicíne - AE21 a AE42. Mechanické vlastnosti sa menili s pretláčaním cez ECAP ...
In this work were studied effects of the grain refinement on the mechanical properties and the corrosion resistance of magnesium alloys potential for medical applications - AE21 and AE42. Mechanical properties changed after ...
In this work were studied effects of the grain refinement on the mechanical properties and the corrosion resistance of magnesium alloys potential for medical applications - AE21 and AE42. Mechanical properties changed after ...
Studium nestabilní plastické deformace metodou akustické emise
Studium nestabilní plastické deformace metodou akustické emise
Diplomová práce (OBHÁJENO)
Vedoucí práce: Dobroň, Patrik
Datum publikování: 2014
Datum obhajoby: 27. 05. 2014
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Byl studován výskyt plastických nestabilit v protlačované slitině AlSi1MgMn (6082) a válcované slitině AlMg4.5Mn0.4 (5182) jako důsledek změny rychlosti deformace a tepelného zpracování. Vzorky byly podrobeny jednoosé ...
The influence of the strain rate and heat treatment on the occurrence of plastic instabilities in extruded AlSi1MgMn (6082) and cold rolled AlMg4.5Mn0.4 (5182) alloys was studied. The samples were uniaxially loaded at ...
The influence of the strain rate and heat treatment on the occurrence of plastic instabilities in extruded AlSi1MgMn (6082) and cold rolled AlMg4.5Mn0.4 (5182) alloys was studied. The samples were uniaxially loaded at ...