Hledat
Zobrazují se záznamy 11-20 z 20
Mikrostruktura a mechanické vlastnosti hliníkových slitin po intenzivní plastické deformaci
Microstructure and mechanical properties of aluminium alloys prepared by severe plastic deformation
Diplomová práce (OBHÁJENO)
Vedoucí práce: Cieslar, Miroslav
Datum publikování: 2015
Datum obhajoby: 09. 09. 2015
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Nové technologie výroby součástí v automobilovém a leteckém průmyslu a požadavky na zlepšení mechanických a korozních vlastností kovových materiálů v obalovém průmyslu podněcují využívání vysoce inovativních a nekonvenčních ...
New technologies of components assembling in car and aircraft industries and requests on improved mechanical and corrosion properties of metallic materials in the packing industry activate the utilization of highly innovative ...
New technologies of components assembling in car and aircraft industries and requests on improved mechanical and corrosion properties of metallic materials in the packing industry activate the utilization of highly innovative ...
Studium vývoje mikrostruktury jemnozrnných IF ocelí
Microstructural evolution of equal-channel angular pressed IF steel
Studium vývoje mikrostruktury jemnozrnných IF ocelí
Diplomová práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2010
Datum obhajoby: 18. 05. 2010
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Kanálové uhlové pretláčanie (ECAP - equal channel angular pressing) patrí medzi pokrokové metódy zlepšovania mechanických vlastností materiálov. Táto práca sa zaoberá skúmaním vplyvu počtu pretláčaní cestou BC na veľkosť ...
Equal channel angular pressing (ECAP) belongs to advanced technologies for improving mechanical properties of materials. In the present work the influence of number of pressing by route BC on grain size, density and type ...
Equal channel angular pressing (ECAP) belongs to advanced technologies for improving mechanical properties of materials. In the present work the influence of number of pressing by route BC on grain size, density and type ...
Magnesium alloys designed for medical applications
Slitiny hořčíku určené pro lékařské aplikace
Diplomová práce (OBHÁJENO)
Vedoucí práce: Minárik, Peter
Datum publikování: 2018
Datum obhajoby: 06. 06. 2018
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Názov: Slitiny hořčíku určené pro lékařské aplikace Author: Mária Zemková Abstract: Táto Diplomová práca sa venuje vplyvu termomechanického spracovania, konkrétne horúcou extrúziou a pretláčaním cez lomený kanál (ECAP), ...
Title: Magnesium alloys designed for medical applications Author: Mária Zemková Abstract: This Master thesis is focused on the influence of hot extrusion and equal channel angular pressing (ECAP) on the microstructure, ...
Title: Magnesium alloys designed for medical applications Author: Mária Zemková Abstract: This Master thesis is focused on the influence of hot extrusion and equal channel angular pressing (ECAP) on the microstructure, ...
Vliv příměsových prvků a textury na plastickou deformaci protlačovaných hořčíkových slitin
Vliv příměsových prvků a textury na plastickou deformaci protlačovaných hořčíkových slitin
Diplomová práce (OBHÁJENO)
Vedoucí práce: Dobroň, Patrik
Datum publikování: 2015
Datum obhajoby: 10. 06. 2015
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Práce je zaměřena na získání nových poznatků o vztahu mikrostruktury, textury a deformačních mechanismů v hořčíkových slitinách (Mg) bez příměsi hliníku. Slitiny s příměsí zirkonia, zinku, manganu a neodymu (ZK10, MN11, ...
This work is focused on the study of the relationship between microstructure, texture and deformation mechanisms in aluminum-free magnesium (Mg) alloys. Extruded alloys containing zirconium, zinc, manganese and neodymium ...
This work is focused on the study of the relationship between microstructure, texture and deformation mechanisms in aluminum-free magnesium (Mg) alloys. Extruded alloys containing zirconium, zinc, manganese and neodymium ...
Výzkum deformačních mechanismů pokročilých lehkých slitin
Investigation of deformation mechanisms of advanced light-weight alloys
Diplomová práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2016
Datum obhajoby: 12. 09. 2016
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Cílem této diplomové práce je prozkoumat mechanické a tlumící vlastnosti slitin AZ91 s přidáním různého množství legujícího prvku bor a dvou experimentálních slitin na bázi čistého hořčíku. Dalším úkolem je určit vliv ...
The objective of this thesis is to investigate the mechanical and damping properties in AZ91 alloys with different boron concentrations and in two experimental alloys based on commercial pure magnesium. Further aim is to ...
The objective of this thesis is to investigate the mechanical and damping properties in AZ91 alloys with different boron concentrations and in two experimental alloys based on commercial pure magnesium. Further aim is to ...
Superplastic deformation of ultrafine-grained magnesium alloys containing rare earth metals and zinc
Superplastická deformace ultrajemnozrnných hořčíkových slitin s obsahem vzácných zemin a zinku
Diplomová práce (OBHÁJENO)
Vedoucí práce: Minárik, Peter
Datum publikování: 2019
Datum obhajoby: 19. 06. 2019
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Tématem této práce byla Superplastická deformace hořčíkových slitin. Komerční slitina Mg- 4Y-3RE (wt.%) připravená metodou ECAP a experimentální slitina Mg-23Zn-2Y (wt.%) byla připravená pomocí extruze a ECAP. Byla dosažena ...
Superplastic behavior of two ultrafine-grained (UFG) magnesium alloys was investigated in this thesis. Commercial Mg-4Y-3RE (wt.%) alloy was prepared by equal channel angular pressing (ECAP) and new experimental alloy ...
Superplastic behavior of two ultrafine-grained (UFG) magnesium alloys was investigated in this thesis. Commercial Mg-4Y-3RE (wt.%) alloy was prepared by equal channel angular pressing (ECAP) and new experimental alloy ...
Effect of microstructure on mechanisms of plastic deformation in fine-grained magnesium alloys
Vliv mikrostruktury na mechanismy plastické deformace v jemnozrnných hořčíkových slitinách
Diplomová práce (OBHÁJENO)
Vedoucí práce: Král, Robert
Datum publikování: 2010
Datum obhajoby: 17. 05. 2010
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Táto práca sa zaoberá štúdiom vplyvu zjemnenia zrna na mechanické vlastnosti a koroziodolnosť horčíkových zliatin potenciálnych pre použitie v medicíne - AE21 a AE42. Mechanické vlastnosti sa menili s pretláčaním cez ECAP ...
In this work were studied effects of the grain refinement on the mechanical properties and the corrosion resistance of magnesium alloys potential for medical applications - AE21 and AE42. Mechanical properties changed after ...
In this work were studied effects of the grain refinement on the mechanical properties and the corrosion resistance of magnesium alloys potential for medical applications - AE21 and AE42. Mechanical properties changed after ...
Studium nestabilní plastické deformace metodou akustické emise
Studium nestabilní plastické deformace metodou akustické emise
Diplomová práce (OBHÁJENO)
Vedoucí práce: Dobroň, Patrik
Datum publikování: 2014
Datum obhajoby: 27. 05. 2014
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Byl studován výskyt plastických nestabilit v protlačované slitině AlSi1MgMn (6082) a válcované slitině AlMg4.5Mn0.4 (5182) jako důsledek změny rychlosti deformace a tepelného zpracování. Vzorky byly podrobeny jednoosé ...
The influence of the strain rate and heat treatment on the occurrence of plastic instabilities in extruded AlSi1MgMn (6082) and cold rolled AlMg4.5Mn0.4 (5182) alloys was studied. The samples were uniaxially loaded at ...
The influence of the strain rate and heat treatment on the occurrence of plastic instabilities in extruded AlSi1MgMn (6082) and cold rolled AlMg4.5Mn0.4 (5182) alloys was studied. The samples were uniaxially loaded at ...
Studium deformačních procesů perspektivních kompozitů na bázi hořčíku
Study of deformation processes of perspective magnesium-based composites
Studium deformačních procesů perspektivních kompozitů na bázi hořčíku
Diplomová práce (OBHÁJENO)
Vedoucí práce: Mathis, Kristián
Datum publikování: 2013
Datum obhajoby: 14. 05. 2013
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Cílem práce je vysvětlit deformační mechanizmy probíhající v kompozitech na bázi hořčíku a vliv morfologie zpevňující fáze na mechanické vlastnosti. Mikrostruktura byla studována optickým a elektronovým mikroskopem (SEM). ...
The goal of the present work is investigation of deformation mechanisms in magnesium-based metal matrix composites and examination of the influence of morphology of strengthening phase on the mechanical properties. The ...
The goal of the present work is investigation of deformation mechanisms in magnesium-based metal matrix composites and examination of the influence of morphology of strengthening phase on the mechanical properties. The ...
Mikrostruktura nerovnovážných tuhých roztoků na bázi Al-Mn
Microstructure of non-equiblirium Al-Mn based solid solutions
Diplomová práce (OBHÁJENO)
Vedoucí práce: Cieslar, Miroslav
Datum publikování: 2010
Datum obhajoby: 17. 05. 2010
Fakulta / součást: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstrakt: Tepelné výměníky v automobilovém průmyslu jsou často vyráběny z hliníkové slitiny AW 3003. Současná snaha o redukci hmotnosti automobilů vede k potřebě snížit tloušťku fólií, ze kterých se výměníky vyrábí. Aby se vyhovělo ...
Heat exchangers in automotive industry are often manufactured from aluminum-based alloy AW 3003. In recent time, the aim to reduce the weight of the cars leads to thickening of the foils, which are used for manufacturing ...
Heat exchangers in automotive industry are often manufactured from aluminum-based alloy AW 3003. In recent time, the aim to reduce the weight of the cars leads to thickening of the foils, which are used for manufacturing ...