Search
Now showing items 1-10 of 13
Stability of dispersoids in aluminium alloys at elevated temperatures.
Stabilita disperzních částic v hliníkových slitinách za zvýšených teplot.
rigorous thesis (RECOGNIZED)
Advisor: Cieslar, Miroslav
Date Issued: 2022
Date of defense: 03. 11. 2022
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Hliníková slitina AA8079 připravena plynulým odléváním mezi válce je běžně používána pro výrobu tenké potravinářské fólie. Vzhledem k použité metodě odlévání a složení slitiny je struktura litého materiálu značně nehomogenní ...
The AA8079 aluminum alloy prepared by twin-roll casting is commonly used as foil stock for manufacturing of thin packaging foil. Due to the nature of the casting method and material composition microstructure of the material ...
The AA8079 aluminum alloy prepared by twin-roll casting is commonly used as foil stock for manufacturing of thin packaging foil. Due to the nature of the casting method and material composition microstructure of the material ...
Hyperjemné interakce v multiferoikách obsahujících železo
Hyperfine interactions in multiferroics containing iron
rigorous thesis (RECOGNIZED)
Advisor: Kohout, Jaroslav
Date Issued: 2021
Date of defense: 06. 10. 2021
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Multiferoické materiály, ve kterých existuje zároveň více spontánních uspořádání (fero-, feri-, antiferomagnetické, feroelektrické, feroelastické) alespoň v určité oblasti teplot a mohou se navzájem ovlivňovat, jsou v ...
Multiferroic materials, in which spontaneous orderings (especially magnetic and electrical, in some cases elastic) jointly exist and may mutually interact, are currently in the center of attention in many fields of research ...
Multiferroic materials, in which spontaneous orderings (especially magnetic and electrical, in some cases elastic) jointly exist and may mutually interact, are currently in the center of attention in many fields of research ...
Relaxivity of magnetic iron oxide nanoparticles containing diamagnetic cations
Relaxivita magnetických nanočástic oxidů železa obsahujících diamagnetické kationty
rigorous thesis (RECOGNIZED)
Advisor: Kohout, Jaroslav
Date Issued: 2021
Date of defense: 24. 03. 2021
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Magnetické nanočástice se staly častým předmětem biomedicínského výzkumu, např. jako potenciální konstrastní látky pro T2-vážené zobrazování pomocí mag- netické rezonance. Schopnost kontrastní látky zvýšit relaxační rychlosti ...
Magnetic nanoparticles have received extensive attention in the biomedical research, e.g. as prospective contrast agents for T2-weighted magnetic resonance imaging. The ability of a contrast agent to enhance the relaxation ...
Magnetic nanoparticles have received extensive attention in the biomedical research, e.g. as prospective contrast agents for T2-weighted magnetic resonance imaging. The ability of a contrast agent to enhance the relaxation ...
Modifikace nanočástic za letu pomocí chemicky aktivního plazmatu
In-flight modification of nanoparticles by chemically active plasma
rigorous thesis (RECOGNIZED)
Advisor: Hanuš, Jan
Date Issued: 2021
Date of defense: 06. 10. 2021
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Název práce: Modifikace nanočástic za letu pomocí chemicky aktivního plazmatu Autor: Hana Libenská Katedra: Katedra makromolekulární fyziky Vedoucí diplomové práce: Mgr. Jan Hanuš Ph.D., Katedra makromolekulární fyziky ...
Title: In-flight modification of nanoparticles by chemically active plasma Author: Hana Libenská Department: Department of Macromolecular Physics Supervisor: Mgr. Jan Hanuš Ph.D., Department of Macromolecular Physics ...
Title: In-flight modification of nanoparticles by chemically active plasma Author: Hana Libenská Department: Department of Macromolecular Physics Supervisor: Mgr. Jan Hanuš Ph.D., Department of Macromolecular Physics ...
Biokompatibilní beta slitiny titanu zpevněné kyslíkem
Oxygen-strengthened biomedical beta titanium alloys
rigorous thesis (RECOGNIZED)
Advisor: Stráský, Josef
Date Issued: 2020
Date of defense: 15. 09. 2020
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Biokompatibilní beta slitiny titanu zpevněné kyslíkem Beta-Ti slitina Ti-35Nb-6Ta-7Zr-0.7O (hm. %) vykazuje nízký modul pružnosti a vysokou pevnost díky intesticiálnímu zpevnění kyslíkem. Tyto mechanické vlastnosti jsou ...
Oxygen strengthened biomedical beta titanium alloys Beta titanium alloy Ti-35Nb-6Ta-7Zr-0.7O (wt. %) exhibits a low Young's modulus and high strength thanks to interstitial strengthening effect of oxygen. These mechanical ...
Oxygen strengthened biomedical beta titanium alloys Beta titanium alloy Ti-35Nb-6Ta-7Zr-0.7O (wt. %) exhibits a low Young's modulus and high strength thanks to interstitial strengthening effect of oxygen. These mechanical ...
Investigation of deformation mechanisms in textured magnesium alloy by advanced in-situ methods
Studium deformačních mechanismů v hořčíkové slitině s texturou pomocí pokročilých in-situ metod
rigorous thesis (RECOGNIZED)
Advisor: Minárik, Peter
Date Issued: 2022
Date of defense: 30. 08. 2022
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Title: Investigation of deformation mechanisms in textured magnesium alloy by advanced in-situ methods Author: Bc. Jan Dittrich Department: Department of Physics of Materials Supervisor: RNDr. Peter Minárik, PhD., Department ...
Název práce: Studium deformačních mechanism· v hořčíkové slitině s texturou pomocí pokročilých in-situ metod Autor: Bc. Jan Dittrich Katedra: Katedra fyziky materiál· Vedoucí diplomové práce: RNDr. Peter Minárik, PhD., ...
Název práce: Studium deformačních mechanism· v hořčíkové slitině s texturou pomocí pokročilých in-situ metod Autor: Bc. Jan Dittrich Katedra: Katedra fyziky materiál· Vedoucí diplomové práce: RNDr. Peter Minárik, PhD., ...
Unconventional behavior of Ce and Yb compounds induced by extreme pressure
Neobvyklé chování Ce a Yb sloučenin vyvolané působením extrémního tlaku
rigorous thesis (RECOGNIZED)
Advisor: Prchal, Jiří
Date Issued: 2022
Date of defense: 14. 03. 2022
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract not found
Mikrostruktura a vlastnosti tenkých vrstev multiferroických komplexních oxidů připravených pomocí metody pulzní laserové depozice
Microstructure and properties of multiferroic complex oxide thin films prepared by pulsed laser deposition method
rigorous thesis (RECOGNIZED)
Advisor: Dopita, Milan
Date Issued: 2023
Date of defense: 28. 06. 2023
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Title: Microstructure and properties of multiferroic complex oxide thin films prepared by pulsed laser deposition method Author: Petr Machovec Department: Department of Condensed Matter Physics Supervisor: RNDr. Milan ...
Název práce: Mikrostruktura a vlastnosti tenkých vrstev multiferroických komplexních oxidů připravených pomocí metody pulzní laserové depozice Autor: Petr Machovec Katedra / Ústav: Katedra fyziky kondenzovaných látek Vedoucí ...
Název práce: Mikrostruktura a vlastnosti tenkých vrstev multiferroických komplexních oxidů připravených pomocí metody pulzní laserové depozice Autor: Petr Machovec Katedra / Ústav: Katedra fyziky kondenzovaných látek Vedoucí ...
Microstructure and mechanical properties study of the finegrained magnesium alloys processed by severe plastic deformation
Studium mikrostruktury a mechanických vlastností jemnozrnných hořčíkových slitin připravených intenzivní plastickou deformací
rigorous thesis (RECOGNIZED)
Advisor: Stráská, Jitka
Date Issued: 2022
Date of defense: 30. 08. 2022
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Two magnesium alloys (Mg-4Y-4Gd-2Ca and Mg-2Y-2Gd-1Ca) with high ignition tem- perature were successfully processed by extrusion. Mg-2Y-2Gd-1Ca alloy was addition- ally processed by equal channel angular pressing (ECAP) ...
Dvě hořčíkové slitiny (Mg-4Y-4Gd-2Ca a Mg-2Y-2Gd-1Ca) vyznačující se vysokou teplo- tou vznícení byly zpracovány extruzí. Slitina Mg-2Y-2Gd-1Ca byla navíc zpracována metodou ECAP pro dosažení ultrajemnozrnné mikrostruktury. ...
Dvě hořčíkové slitiny (Mg-4Y-4Gd-2Ca a Mg-2Y-2Gd-1Ca) vyznačující se vysokou teplo- tou vznícení byly zpracovány extruzí. Slitina Mg-2Y-2Gd-1Ca byla navíc zpracována metodou ECAP pro dosažení ultrajemnozrnné mikrostruktury. ...
Modifikace nanočástic pomocí tubulárního naprašovacího systému
Modification of nanoparticles by means of tubular sputtering system
rigorous thesis (RECOGNIZED)
Advisor: Hanuš, Jan
Date Issued: 2020
Date of defense: 19. 02. 2020
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Tato práce se zabývá možností přípravy heterogenních nanočástic, tedy nanočástic složených z více materiálů. Zvolený postup spočívá v modifikaci proletujících primárních nanočástic, vyrobených v plynovém agregačním zdroji, ...
The aim of this work is to prepare heterogeneous nanoparticles which means nanoparticles composed of more than one material. Our approach lies in in-flight modification of primary nanoparticles in the tubular sputtering ...
The aim of this work is to prepare heterogeneous nanoparticles which means nanoparticles composed of more than one material. Our approach lies in in-flight modification of primary nanoparticles in the tubular sputtering ...