Search
Now showing items 1-10 of 13
Studium deformačních procesů perspektivních kompozitů na bázi hořčíku
Study of deformation processes of perspective magnesium-based compositesStudium deformačních procesů perspektivních kompozitů na bázi hořčíku
diploma thesis
Advisor: Mathis, Kristián
Date Issued:
Date of defense: 14. 05. 2013
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Cílem práce je vysvětlit deformační mechanizmy probíhající v kompozitech na bázi hořčíku a vliv morfologie zpevňující fáze na mechanické vlastnosti. Mikrostruktura byla studována optickým a elektronovým mikroskopem (SEM). ...
The goal of the present work is investigation of deformation mechanisms in magnesium-based metal matrix composites and examination of the influence of morphology of strengthening phase on the mechanical properties. The ...
The goal of the present work is investigation of deformation mechanisms in magnesium-based metal matrix composites and examination of the influence of morphology of strengthening phase on the mechanical properties. The ...
Studium nestabilní plastické deformace metodou akustické emise
Studium nestabilní plastické deformace metodou akustické emise
diploma thesis
Advisor: Dobroň, Patrik
Date Issued:
Date of defense: 27. 05. 2014
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Byl studován výskyt plastických nestabilit v protlačované slitině AlSi1MgMn (6082) a válcované slitině AlMg4.5Mn0.4 (5182) jako důsledek změny rychlosti deformace a tepelného zpracování. Vzorky byly podrobeny jednoosé ...
The influence of the strain rate and heat treatment on the occurrence of plastic instabilities in extruded AlSi1MgMn (6082) and cold rolled AlMg4.5Mn0.4 (5182) alloys was studied. The samples were uniaxially loaded at ...
The influence of the strain rate and heat treatment on the occurrence of plastic instabilities in extruded AlSi1MgMn (6082) and cold rolled AlMg4.5Mn0.4 (5182) alloys was studied. The samples were uniaxially loaded at ...
Studium deformačních procesů v hexagonálnich materiálech
Study of deformation processes in hexagonal materials
diploma thesis
Advisor: Mathis, Kristián
Date Issued:
Date of defense: 14. 05. 2013
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Předložená práce se zabývá studiem deformačních mechanismů čistého hořčíku pomocí pokročilých in-situ metod v závislosti na způsobu deformace. Během deformačních zkoušek jsme zaznamenali akustickou emisi a měřili neutronovou ...
The deformation mechanisms of commercially pure magnesium using advanced in-situ methods were investigated in the present work. Compression and tensile test were done at room temperature. Simultaneously, the neutron ...
The deformation mechanisms of commercially pure magnesium using advanced in-situ methods were investigated in the present work. Compression and tensile test were done at room temperature. Simultaneously, the neutron ...
Studium kolektivního chování defektů krystalové mříže metodou akustické emise
Investigation of collective behaviour of lattice defects by the acoustic emission technique
bachelor thesis
Advisor: Dobroň, Patrik
Date Issued:
Date of defense: 19. 06. 2012
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Portevinův-Le Chatelierův jev je makroskopická, prostorově-časová nestabilita plastické deformace a objevuje se v některých průmyslově důležitých slitinách, např. na bázi železa, hliníku nebo hořčíku, jsou-li tyto materiály ...
The Portevin-Le Chatelier effect is a macroscopic, spatio-temporal instability of plastic deformation. This phenomenon appears in some industrially important metallic alloys, e.g. based on iron, aluminum or magnesium if ...
The Portevin-Le Chatelier effect is a macroscopic, spatio-temporal instability of plastic deformation. This phenomenon appears in some industrially important metallic alloys, e.g. based on iron, aluminum or magnesium if ...
Studium anizotropie tvorby mechanických dvojčat v hořčíkové slitině AZ31
Study of twinning anisotropy of AZ31 magnesium alloy
diploma thesis
Advisor: Mathis, Kristián
Date Issued:
Date of defense: 20. 09. 2011
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Předložená práce se zabývá studiem hořčíkové slitiny AZ31 vyrobené metodou horizontálního kontinuálního lití. Analyzuje výsledky deformačních zkoušek v tahu a tlaku, provedených v teplotním rozsahu od 20 řC do 300 řC, ve ...
In the present work the deformation behaviour of magnesium-based alloy AZ31 which was produced by horizontal continual casting is investigated. Samples with two different orientations are deformed in tension and compression ...
In the present work the deformation behaviour of magnesium-based alloy AZ31 which was produced by horizontal continual casting is investigated. Samples with two different orientations are deformed in tension and compression ...
Studium deformačních mechanismů v nových hořčíkových slitin při jednoosém a nízko cyklovém namáhaní metodou akustické emise
An Acoustic Emission Study of Deformation Mechanisms in Novel Magnesium Alloys at Uniaxial and Low Cyclic Loading
bachelor thesis
Advisor: Dobroň, Patrik
Date Issued:
Date of defense: 19. 06. 2013
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Práce je zaměřená na získání nových poznatků o vztahu mikrostruktury a deformačních mechanismů v hořčíkových slitinách (Mg) během jednoosého (tah, tlak) a nízko cyklového namáhání za použití metody akustické emise (AE). ...
This work is focused on the study of the relationship between microstructure and deformation mechanisms in magnesium (Mg) alloys during uniaxial (tension, compression) and low cyclic loading by the acoustic emission (AE) ...
This work is focused on the study of the relationship between microstructure and deformation mechanisms in magnesium (Mg) alloys during uniaxial (tension, compression) and low cyclic loading by the acoustic emission (AE) ...
Investigation of residual stresses and deformation mechanisms of magnesium-based composites by means of neutron diffraction and acoustic emission methods
Studium reziduálních napětí a deformačních mechanismů kompozitů na bázi hořčíku pomocí metod neutronové difrakce a akustické emise
dissertation thesis
Advisor: Mathis, Kristián
Date Issued:
Date of defense: 26. 09. 2017
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: The objective of this thesis is to study the mechanical properties of magnesium-based composite (AX41) reinforced by short Saffil fibers. Two type of samples have been investigated: fiber plane parallel respective perpendicular ...
Cílem této práce je studium mechanických vlastností kompozitů na bázi hořčíkových slitin (AX41) vyztužené krátkými Saffilovými vláknami. Byly zkoumány dva typy vzorků: s rovinou vlákna rovnoběžnou resp. kolmou na osu ...
Cílem této práce je studium mechanických vlastností kompozitů na bázi hořčíkových slitin (AX41) vyztužené krátkými Saffilovými vláknami. Byly zkoumány dva typy vzorků: s rovinou vlákna rovnoběžnou resp. kolmou na osu ...
Study of cooperative dislocation phenomena in solids by the acoustic emission technique
Studium kooperativních dislokačních jevů v pevných látkách metodou akustické emise
dissertation thesis
Advisor: Chmelík, František
Date Issued:
Date of defense: 20. 09. 2016
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Title: Study of cooperative dislocation phenomena in solids by the acoustic emis- sion technique Author: Michal KNAPEK Department: Department of Physics of Materials Supervisor: doc. RNDr. František Chmelík, CSc., Department ...
Názov práce: Štúdium kooperatívnych dislokačných javov v pevných látkach me- tódou akustickej emisie Autor: Michal KNAPEK Katedra: Katedra fyziky materiálů Školitel': doc. RNDr. František Chmelík, CSc., Katedra fyziky ...
Názov práce: Štúdium kooperatívnych dislokačných javov v pevných látkach me- tódou akustickej emisie Autor: Michal KNAPEK Katedra: Katedra fyziky materiálů Školitel': doc. RNDr. František Chmelík, CSc., Katedra fyziky ...
Study of advanced high strength magnesium alloys by in situ techniques
Studium pokročilých hořčíkových slitin s vysokou pevností pomocí in-situ metod
dissertation thesis
Advisor: Dobroň, Patrik
Date Issued:
Date of defense: 25. 09. 2019
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Hlavním cílem disertační práce bylo stanovení aktivních deformačních mechanismů v moderních hořčíkových slitinách s vysokou pevností s využitím pokročilých in-situ metod umožňující vysoké rozlišení v čase a v prostoru. ...
The aim of the present doctoral thesis was to reveal the active deformation mechanisms in novel high strength magnesium (Mg) alloys using advanced in-situ techniques with high time and space resolutions. The deformation ...
The aim of the present doctoral thesis was to reveal the active deformation mechanisms in novel high strength magnesium (Mg) alloys using advanced in-situ techniques with high time and space resolutions. The deformation ...
Studium deformačních procesů v slitinách Mg-Gd
Investigation of deformation mechanisms in Mg-Gd alloysStudium deformačních procesů v slitinách Mg-Gd
bachelor thesis
Advisor: Mathis, Kristián
Date Issued:
Date of defense: 12. 09. 2019
Faculty / Institute: Matematicko-fyzikální fakulta / Faculty of Mathematics and Physics
Abstract: Title: Investigation of deformation mechanisms in Mg-Gd alloys Author: Andrea Szabóová Department: Department of Physics of Materials Supervisor: doc. RNDr. Kristián Mathis, DrSc. Abstract: In the present work, the deformation ...
Název práce: Studium deformačních procesů v slitinách Mg-Gd Autor: Andrea Szabóová Katedra / Ústav: Katedra fyziky materiálů Vedoucí bakalářské práce: doc. RNDr. Kristián Mathis, DrSc. Abstrakt: Předložená práce se zabývá ...
Název práce: Studium deformačních procesů v slitinách Mg-Gd Autor: Andrea Szabóová Katedra / Ústav: Katedra fyziky materiálů Vedoucí bakalářské práce: doc. RNDr. Kristián Mathis, DrSc. Abstrakt: Předložená práce se zabývá ...