Show simple item record

Study of the selected properties of aluminium alloys with Yb and Zr addition
dc.contributor.advisorVlach, Martin
dc.creatorZikmund, Sebastien
dc.date.accessioned2022-04-06T11:09:59Z
dc.date.available2022-04-06T11:09:59Z
dc.date.issued2021
dc.identifier.urihttp://hdl.handle.net/20.500.11956/152528
dc.description.abstractPředkládaná práce se zabývá vlivem příměsí ytterbia, manganu a zirkonu ve slitinách AlYb a AlMnYbZr ve stavech po odlití, válcování za studena se stupněm deformace 40 a 70 % a po vysokoteplotním žíhání. Materiály byly zkoumány pomocí elektrické rezisto- metrie, diferenční skenovací kalorimetrie a měřením mikrotvrdosti. Charakterizace zkou- maných slitin byla doplněna paralelním výzkumem mikrostruktury pomocí transmisní a skenovací elektronové mikroskopie, elektronové difrakce a metody zpětně odražených elektronů. Byl prokázán pozitivní vliv příměsí Mn a Zr a válcování za studena na mi- krotvrdost materiálů. Mezi různými stupni deformace válcováním nebyl v rámci chyb měření pozorován rozdílný vliv na mikrotvrdost materiálu. Současné přidání Mn a Zr má pozitivní vliv na velikost zrna, kdy velikost zrna ve výchozím stavu byla u slitiny AlYb stanovena na řádově milimetry a u slitiny AlMnYbZr na stovky mikrometrů. Na hrani- cích (sub)zrn byla u obou slitin pozorovaná eutektická fáze bohatá na Yb, Fe, resp. Yb, Mn, Cu, Fe u slitiny AlMnYbZr. Při teplotách žíhání kolem 400 řC dochází k dodatečné precipitaci částic Al3Yb a Al3(Yb,Zr). Dále byla hledána vhodná homogenizační teplota, která byla u materiálu AlYb stanovena na 625 řC. Detailnější studium vysokoteplotního žíhání obou slitin je třeba doplnit dalším...cs_CZ
dc.description.abstractThe presented thesis focuses on the effect of addition of ytterbium, manganese and zir- con in alloys AlYb and AlMnYbZr in the state as casted, cold rolled with the deformation degree of 40 % and 70 % and after high-temperature annealing. The materials were exa- mined with the methods of electrical rezistometry, differential scanning calorimetry and microhardness measurements. The characterization of the examined alloys was completed by a parallel research of the microstructure with the methods of transmission and scanning electron microscopy, electron diffraction and electron backscatter diffraction. A positive influence of the addition Mn and Zr and cold rolling was proven at hardening of the mate- rials. In the context of messurement error a different influence in the microhardness of the materials was not observed among the different degrees of cold roling deformation. The si- multaneous addition of Mn and Zr has a positive effect on the size of the grain, whereas the size of the grain at the as prepered state was determined in millimetres (in AlYb) and in hundres of mictometers (AlMnYbZr). On the border of (sub)grains an eutetic phase rich in Yb, Fe (or more precisely Yb, Mn, Cu, Fe for the alloy AlMnYbZR) was observed for both alloys. At the annealing temperature around 400 řC, an additional...en_US
dc.languageČeštinacs_CZ
dc.language.isocs_CZ
dc.publisherUniverzita Karlova, Matematicko-fyzikální fakultacs_CZ
dc.subjectprecipitation|electrical resistometry|hardness|rollingen_US
dc.subjectprecipitace|elektrická rezistometrie|tvrdost|válcovánícs_CZ
dc.titleStudium vybraných charakteristik hliníkových slitin s přídavkem Yb a Zrcs_CZ
dc.typebakalářská prácecs_CZ
dcterms.created2021
dcterms.dateAccepted2021-09-08
dc.description.departmentLaboratory of General Physics Educationen_US
dc.description.departmentKabinet výuky obecné fyzikycs_CZ
dc.description.facultyMatematicko-fyzikální fakultacs_CZ
dc.description.facultyFaculty of Mathematics and Physicsen_US
dc.identifier.repId228009
dc.title.translatedStudy of the selected properties of aluminium alloys with Yb and Zr additionen_US
dc.contributor.refereeMathis, Kristián
thesis.degree.nameBc.
thesis.degree.levelbakalářskécs_CZ
thesis.degree.disciplineFyzika zaměřená na vzdělávánícs_CZ
thesis.degree.disciplinePhysics Directed Towards Educationen_US
thesis.degree.programPhysicsen_US
thesis.degree.programFyzikacs_CZ
uk.thesis.typebakalářská prácecs_CZ
uk.taxonomy.organization-csMatematicko-fyzikální fakulta::Kabinet výuky obecné fyzikycs_CZ
uk.taxonomy.organization-enFaculty of Mathematics and Physics::Laboratory of General Physics Educationen_US
uk.faculty-name.csMatematicko-fyzikální fakultacs_CZ
uk.faculty-name.enFaculty of Mathematics and Physicsen_US
uk.faculty-abbr.csMFFcs_CZ
uk.degree-discipline.csFyzika zaměřená na vzdělávánícs_CZ
uk.degree-discipline.enPhysics Directed Towards Educationen_US
uk.degree-program.csFyzikacs_CZ
uk.degree-program.enPhysicsen_US
thesis.grade.csVýborněcs_CZ
thesis.grade.enExcellenten_US
uk.abstract.csPředkládaná práce se zabývá vlivem příměsí ytterbia, manganu a zirkonu ve slitinách AlYb a AlMnYbZr ve stavech po odlití, válcování za studena se stupněm deformace 40 a 70 % a po vysokoteplotním žíhání. Materiály byly zkoumány pomocí elektrické rezisto- metrie, diferenční skenovací kalorimetrie a měřením mikrotvrdosti. Charakterizace zkou- maných slitin byla doplněna paralelním výzkumem mikrostruktury pomocí transmisní a skenovací elektronové mikroskopie, elektronové difrakce a metody zpětně odražených elektronů. Byl prokázán pozitivní vliv příměsí Mn a Zr a válcování za studena na mi- krotvrdost materiálů. Mezi různými stupni deformace válcováním nebyl v rámci chyb měření pozorován rozdílný vliv na mikrotvrdost materiálu. Současné přidání Mn a Zr má pozitivní vliv na velikost zrna, kdy velikost zrna ve výchozím stavu byla u slitiny AlYb stanovena na řádově milimetry a u slitiny AlMnYbZr na stovky mikrometrů. Na hrani- cích (sub)zrn byla u obou slitin pozorovaná eutektická fáze bohatá na Yb, Fe, resp. Yb, Mn, Cu, Fe u slitiny AlMnYbZr. Při teplotách žíhání kolem 400 řC dochází k dodatečné precipitaci částic Al3Yb a Al3(Yb,Zr). Dále byla hledána vhodná homogenizační teplota, která byla u materiálu AlYb stanovena na 625 řC. Detailnější studium vysokoteplotního žíhání obou slitin je třeba doplnit dalším...cs_CZ
uk.abstract.enThe presented thesis focuses on the effect of addition of ytterbium, manganese and zir- con in alloys AlYb and AlMnYbZr in the state as casted, cold rolled with the deformation degree of 40 % and 70 % and after high-temperature annealing. The materials were exa- mined with the methods of electrical rezistometry, differential scanning calorimetry and microhardness measurements. The characterization of the examined alloys was completed by a parallel research of the microstructure with the methods of transmission and scanning electron microscopy, electron diffraction and electron backscatter diffraction. A positive influence of the addition Mn and Zr and cold rolling was proven at hardening of the mate- rials. In the context of messurement error a different influence in the microhardness of the materials was not observed among the different degrees of cold roling deformation. The si- multaneous addition of Mn and Zr has a positive effect on the size of the grain, whereas the size of the grain at the as prepered state was determined in millimetres (in AlYb) and in hundres of mictometers (AlMnYbZr). On the border of (sub)grains an eutetic phase rich in Yb, Fe (or more precisely Yb, Mn, Cu, Fe for the alloy AlMnYbZR) was observed for both alloys. At the annealing temperature around 400 řC, an additional...en_US
uk.file-availabilityV
uk.grantorUniverzita Karlova, Matematicko-fyzikální fakulta, Kabinet výuky obecné fyzikycs_CZ
thesis.grade.code1
dc.contributor.consultantKodetová, Veronika
dc.contributor.consultantKudrnová, Hana
dc.contributor.consultantLeibner, Michal
uk.publication-placePrahacs_CZ
uk.thesis.defenceStatusO


Files in this item

Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record


© 2017 Univerzita Karlova, Ústřední knihovna, Ovocný trh 560/5, 116 36 Praha 1; email: admin-repozitar [at] cuni.cz

Za dodržení všech ustanovení autorského zákona jsou zodpovědné jednotlivé složky Univerzity Karlovy. / Each constituent part of Charles University is responsible for adherence to all provisions of the copyright law.

Upozornění / Notice: Získané informace nemohou být použity k výdělečným účelům nebo vydávány za studijní, vědeckou nebo jinou tvůrčí činnost jiné osoby než autora. / Any retrieved information shall not be used for any commercial purposes or claimed as results of studying, scientific or any other creative activities of any person other than the author.

DSpace software copyright © 2002-2015  DuraSpace
Theme by 
@mire NV