Show simple item record

Analysis of twin-roll cast aluminium-steel clad strips
dc.contributor.advisorŠlapáková, Michaela
dc.creatorKřivská, Barbora
dc.date.accessioned2020-08-03T09:53:20Z
dc.date.available2020-08-03T09:53:20Z
dc.date.issued2020
dc.identifier.urihttp://hdl.handle.net/20.500.11956/119729
dc.description.abstractThe microstructure, diffusion and phase transformations in aluminum-steel clad sheet were studied within the thesis by means of light optical microscopy, electron microscopy, resistometry and positron annihilation spectroscopy. Results of experimental methods were supplemented by finite element method employed for evaluation of electrical resistivity and simulation of diffusion between steel and aluminum. Several annealing experiments were carried out. The effective interdiffusion coefficient was evaluated by Boltzmann-Matano method from measured concentration profiles through the interface. Formation of an interfacial intermetallic phase was studied and orthorhombic phases Al13Fe4 and Al5Fe2 were identified present in the layer. Surprising results were obtained from the in-situ annealing in TEM (SEM) which go against the results found in a recent literature - the interfacial layer grows towards steel layer.en_US
dc.description.abstractV rámci diplomové práce byla studována mikrostruktura plátovaného Al-ocelového kompozitu pomocí světelné a elektronové mikroskopie. Dále byly studovány difúzní procesů probíhající na rozhraní a fázové transformace uvnitř hliníkové vrstvy. Byly provedeny žíhací experiment, při kterých byl pozorován růst intermetalické fáze na rozhraní oceli a hliníku. Pomocí Boltzmann-Matanovy metody byl určen efektivní interdifúzní, který byl následně použit pro zpětnou simulaci koncentračního profilu. V rámci in-situ žíhání v TEM (SEM) bylo zjištěno, že fáze roste směrem do oceli, nikoliv do hliníku, jak uvádí současná literatura. .cs_CZ
dc.languageČeštinacs_CZ
dc.language.isocs_CZ
dc.publisherUniverzita Karlova, Matematicko-fyzikální fakultacs_CZ
dc.subjectElectron microscopyen_US
dc.subjectaluminiumen_US
dc.subjectsteelen_US
dc.subjectphase analysisen_US
dc.subjectElektronová mikroskopiecs_CZ
dc.subjecthliníkcs_CZ
dc.subjectocelcs_CZ
dc.subjectfázová analýzacs_CZ
dc.titleAnalýza plynule odlévaných hliníko-ocelových plátůcs_CZ
dc.typediplomová prácecs_CZ
dcterms.created2020
dcterms.dateAccepted2020-07-13
dc.description.departmentDepartment of Physics of Materialsen_US
dc.description.departmentKatedra fyziky materiálůcs_CZ
dc.description.facultyMatematicko-fyzikální fakultacs_CZ
dc.description.facultyFaculty of Mathematics and Physicsen_US
dc.identifier.repId215350
dc.title.translatedAnalysis of twin-roll cast aluminium-steel clad stripsen_US
dc.contributor.refereeKarlík, Miroslav
thesis.degree.nameMgr.
thesis.degree.levelnavazující magisterskécs_CZ
thesis.degree.disciplineFyzika kondenzovaných soustav a materiálůcs_CZ
thesis.degree.disciplinePhysics of Condensed Matter and Materialsen_US
thesis.degree.programPhysicsen_US
thesis.degree.programFyzikacs_CZ
uk.thesis.typediplomová prácecs_CZ
uk.taxonomy.organization-csMatematicko-fyzikální fakulta::Katedra fyziky materiálůcs_CZ
uk.taxonomy.organization-enFaculty of Mathematics and Physics::Department of Physics of Materialsen_US
uk.faculty-name.csMatematicko-fyzikální fakultacs_CZ
uk.faculty-name.enFaculty of Mathematics and Physicsen_US
uk.faculty-abbr.csMFFcs_CZ
uk.degree-discipline.csFyzika kondenzovaných soustav a materiálůcs_CZ
uk.degree-discipline.enPhysics of Condensed Matter and Materialsen_US
uk.degree-program.csFyzikacs_CZ
uk.degree-program.enPhysicsen_US
thesis.grade.csVýborněcs_CZ
thesis.grade.enExcellenten_US
uk.abstract.csV rámci diplomové práce byla studována mikrostruktura plátovaného Al-ocelového kompozitu pomocí světelné a elektronové mikroskopie. Dále byly studovány difúzní procesů probíhající na rozhraní a fázové transformace uvnitř hliníkové vrstvy. Byly provedeny žíhací experiment, při kterých byl pozorován růst intermetalické fáze na rozhraní oceli a hliníku. Pomocí Boltzmann-Matanovy metody byl určen efektivní interdifúzní, který byl následně použit pro zpětnou simulaci koncentračního profilu. V rámci in-situ žíhání v TEM (SEM) bylo zjištěno, že fáze roste směrem do oceli, nikoliv do hliníku, jak uvádí současná literatura. .cs_CZ
uk.abstract.enThe microstructure, diffusion and phase transformations in aluminum-steel clad sheet were studied within the thesis by means of light optical microscopy, electron microscopy, resistometry and positron annihilation spectroscopy. Results of experimental methods were supplemented by finite element method employed for evaluation of electrical resistivity and simulation of diffusion between steel and aluminum. Several annealing experiments were carried out. The effective interdiffusion coefficient was evaluated by Boltzmann-Matano method from measured concentration profiles through the interface. Formation of an interfacial intermetallic phase was studied and orthorhombic phases Al13Fe4 and Al5Fe2 were identified present in the layer. Surprising results were obtained from the in-situ annealing in TEM (SEM) which go against the results found in a recent literature - the interfacial layer grows towards steel layer.en_US
uk.file-availabilityV
uk.grantorUniverzita Karlova, Matematicko-fyzikální fakulta, Katedra fyziky materiálůcs_CZ
thesis.grade.code1
uk.publication-placePrahacs_CZ


Files in this item

Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record


© 2017 Univerzita Karlova, Ústřední knihovna, Ovocný trh 560/5, 116 36 Praha 1; email: admin-repozitar [at] cuni.cz

Za dodržení všech ustanovení autorského zákona jsou zodpovědné jednotlivé složky Univerzity Karlovy. / Each constituent part of Charles University is responsible for adherence to all provisions of the copyright law.

Upozornění / Notice: Získané informace nemohou být použity k výdělečným účelům nebo vydávány za studijní, vědeckou nebo jinou tvůrčí činnost jiné osoby než autora. / Any retrieved information shall not be used for any commercial purposes or claimed as results of studying, scientific or any other creative activities of any person other than the author.

DSpace software copyright © 2002-2015  DuraSpace
Theme by 
@mire NV