dc.contributor.advisor | Laštovička, Josef | |
dc.creator | Dastychová, Vendula | |
dc.date.accessioned | 2019-09-26T11:33:48Z | |
dc.date.available | 2019-09-26T11:33:48Z | |
dc.date.issued | 2019 | |
dc.identifier.uri | http://hdl.handle.net/20.500.11956/108918 | |
dc.description.abstract | The thesis deals with contemporary methods of converting 3D geoinformation model into analog/printed form using various types of printers. The thesis documents an overview of current works and methods used. The benefit of the thesis is the overview of methods, software and available options for 3D printing. Based two types of printers the thesis demonstrates outputs quality. Also, the thesis introduces a general prescription for the process of processing the geoinformation data of a 3D model to print it. This process is applied in course of preparation cpecific model. In the empirical part, the thesis is applied on the concrete case study of the historical modeling of the Ostrov monastery. An integral part of the thesis is also a comparison of outputs of two selected printers - powder and string type. Keywords: 3D print, technologies, methods of 3D print, 3D model, GIS | en_US |
dc.description.abstract | Práce se zabývá soudobými metodami převodu 3D geoinformačního modelu do analogové/vytisknuté podoby pomocí různých typů tiskáren. Práce dokumentuje přehled současných prací a užívaných metod. Přínos práce spočívá v přehledu metod, softwarů a dostupných možností pro 3D tisk. Na základě vybraných dvou typů tiskáren pak práce demonstruje kvalitu výstupů. Taktéž práce přináší obecný předpis k postupu při zpracování dat geoinformačního 3D modelu k jeho vytisknutí, který je pak aplikován na přípravu tisku konkrétního modelu. Konkrétně je celá práce v empirické části aplikována na případovou studii historické modelace Ostrovského kláštera. Nedílnou součástí práce je i porovnání výstupů dvou vybraných tiskáren - práškového a strunového typu. Klíčová slova: 3D tisk, technologie, metodika tisku, 3D model, GIS | cs_CZ |
dc.language | Čeština | cs_CZ |
dc.language.iso | cs_CZ | |
dc.publisher | Univerzita Karlova, Přírodovědecká fakulta | cs_CZ |
dc.subject | 3D tisk | cs_CZ |
dc.subject | geodata | cs_CZ |
dc.subject | Ostrovský klášter | cs_CZ |
dc.subject | 3D printing | en_US |
dc.subject | geographical data | en_US |
dc.subject | Ostrovský klášter | en_US |
dc.title | Příprava geografických dat pro 3D tisk a jejich vizualizace: Case study Ostrovský klášter | cs_CZ |
dc.type | bakalářská práce | cs_CZ |
dcterms.created | 2019 | |
dcterms.dateAccepted | 2019-09-03 | |
dc.description.department | Department of Applied Geoinformatics and Cartography | en_US |
dc.description.department | Katedra aplikované geoinformatiky a kartografie | cs_CZ |
dc.description.faculty | Faculty of Science | en_US |
dc.description.faculty | Přírodovědecká fakulta | cs_CZ |
dc.identifier.repId | 209631 | |
dc.title.translated | Preprocessing of geographical data for 3D printing and vizualizations: Case study Ostrovský klášter | en_US |
dc.contributor.referee | Brus, Jan | |
thesis.degree.name | Bc. | |
thesis.degree.level | bakalářské | cs_CZ |
thesis.degree.discipline | Geografie a kartografie | cs_CZ |
thesis.degree.discipline | Geography and Cartography | en_US |
thesis.degree.program | Geography | en_US |
thesis.degree.program | Geografie | cs_CZ |
uk.thesis.type | bakalářská práce | cs_CZ |
uk.taxonomy.organization-cs | Přírodovědecká fakulta::Katedra aplikované geoinformatiky a kartografie | cs_CZ |
uk.taxonomy.organization-en | Faculty of Science::Department of Applied Geoinformatics and Cartography | en_US |
uk.faculty-name.cs | Přírodovědecká fakulta | cs_CZ |
uk.faculty-name.en | Faculty of Science | en_US |
uk.faculty-abbr.cs | PřF | cs_CZ |
uk.degree-discipline.cs | Geografie a kartografie | cs_CZ |
uk.degree-discipline.en | Geography and Cartography | en_US |
uk.degree-program.cs | Geografie | cs_CZ |
uk.degree-program.en | Geography | en_US |
thesis.grade.cs | Výborně | cs_CZ |
thesis.grade.en | Excellent | en_US |
uk.abstract.cs | Práce se zabývá soudobými metodami převodu 3D geoinformačního modelu do analogové/vytisknuté podoby pomocí různých typů tiskáren. Práce dokumentuje přehled současných prací a užívaných metod. Přínos práce spočívá v přehledu metod, softwarů a dostupných možností pro 3D tisk. Na základě vybraných dvou typů tiskáren pak práce demonstruje kvalitu výstupů. Taktéž práce přináší obecný předpis k postupu při zpracování dat geoinformačního 3D modelu k jeho vytisknutí, který je pak aplikován na přípravu tisku konkrétního modelu. Konkrétně je celá práce v empirické části aplikována na případovou studii historické modelace Ostrovského kláštera. Nedílnou součástí práce je i porovnání výstupů dvou vybraných tiskáren - práškového a strunového typu. Klíčová slova: 3D tisk, technologie, metodika tisku, 3D model, GIS | cs_CZ |
uk.abstract.en | The thesis deals with contemporary methods of converting 3D geoinformation model into analog/printed form using various types of printers. The thesis documents an overview of current works and methods used. The benefit of the thesis is the overview of methods, software and available options for 3D printing. Based two types of printers the thesis demonstrates outputs quality. Also, the thesis introduces a general prescription for the process of processing the geoinformation data of a 3D model to print it. This process is applied in course of preparation cpecific model. In the empirical part, the thesis is applied on the concrete case study of the historical modeling of the Ostrov monastery. An integral part of the thesis is also a comparison of outputs of two selected printers - powder and string type. Keywords: 3D print, technologies, methods of 3D print, 3D model, GIS | en_US |
uk.file-availability | V | |
uk.publication.place | Praha | cs_CZ |
uk.grantor | Univerzita Karlova, Přírodovědecká fakulta, Katedra aplikované geoinformatiky a kartografie | cs_CZ |
thesis.grade.code | 1 | |