dc.contributor.advisor | Lysák, Jakub | |
dc.creator | Jančovič, Marián | |
dc.date.accessioned | 2018-10-08T10:22:16Z | |
dc.date.available | 2018-10-08T10:22:16Z | |
dc.date.issued | 2018 | |
dc.identifier.uri | http://hdl.handle.net/20.500.11956/102222 | |
dc.description.abstract | Filtration of Airborne Laserscanning Data Abstract The diploma thesis deals with automatized area classification with different surfaces in rocky towns. These areas are input into Airborne Laser-Scanning data filtration, where each of the areas is filtered with different parameters. The reason for this approach is the extreme height variety and dense vegetation typical for rocky towns, which causes the inadequacy of most common filtration algorithms applied with the same set of parameters for whole area. The methodic proposed by us consists of splitting the area of interest into three parts: Residential area, rocky area and area of vegetation (i.e. area that doesn't contain rocks or buildings). Each of these has special parameters applied during the following filtration, which reflect its characteristics. Key words: laser scanning, DTM, rocky towns, area based filtration | en_US |
dc.description.abstract | Filtrácia dát leteckého laserového skenovania Abstrakt Práca sa zaoberá automatizovanou klasifikáciou oblastí s rôznymi typmi povrchu v skalných mestách. Tieto oblasti vstupujú do filtrácie dát leteckého laserového skenovania, pričom každá z oblastí je filtrovaná s inými parametrami. Dôvodom pre takýto prístup je extrémna členitosť a hustá vegetácia typická pre skalné mestá, čo zapríčiňuje nedostatočnosť väčšiny bežných filtračných algoritmov aplikovaných s rovnakými parametrami na celé územie. Nami navrhnutá metodika spočíva v rozdelení záujmového územia do troch oblastí: oblasti budov, oblasti skál a oblasti vegetácie (resp. oblasti, v ktorej nie sú ani skaly, ani budovy). Každá z nich má pri následnej filtrácii špecifické parametre, ktoré reflektujú charakter danej oblasti. Kľúčové slová: letecké laserové skenovanie, DMR, skalné mestá, priestorovo podmienená filtrácia | cs_CZ |
dc.language | Slovenčina | cs_CZ |
dc.language.iso | sk_SK | |
dc.publisher | Univerzita Karlova, Přírodovědecká fakulta | cs_CZ |
dc.title | Filtrácia dát leteckého laserového skenovania | sk_SK |
dc.type | diplomová práce | cs_CZ |
dcterms.created | 2018 | |
dcterms.dateAccepted | 2018-09-13 | |
dc.description.department | Katedra aplikované geoinformatiky a kartografie | cs_CZ |
dc.description.department | Department of Applied Geoinformatics and Cartography | en_US |
dc.description.faculty | Faculty of Science | en_US |
dc.description.faculty | Přírodovědecká fakulta | cs_CZ |
dc.identifier.repId | 187273 | |
dc.title.translated | Filtration of Airborne Laserscanning Data | en_US |
dc.title.translated | Filtrace dat leteckého laserového skenování | cs_CZ |
dc.contributor.referee | Potůčková, Markéta | |
thesis.degree.name | Mgr. | |
thesis.degree.level | navazující magisterské | cs_CZ |
thesis.degree.discipline | Cartography and Geoinformatics | en_US |
thesis.degree.discipline | Kartografie a geoinformatika | cs_CZ |
thesis.degree.program | Geografie | cs_CZ |
thesis.degree.program | Geography | en_US |
uk.thesis.type | diplomová práce | cs_CZ |
uk.taxonomy.organization-cs | Přírodovědecká fakulta::Katedra aplikované geoinformatiky a kartografie | cs_CZ |
uk.taxonomy.organization-en | Faculty of Science::Department of Applied Geoinformatics and Cartography | en_US |
uk.faculty-name.cs | Přírodovědecká fakulta | cs_CZ |
uk.faculty-name.en | Faculty of Science | en_US |
uk.faculty-abbr.cs | PřF | cs_CZ |
uk.degree-discipline.cs | Kartografie a geoinformatika | cs_CZ |
uk.degree-discipline.en | Cartography and Geoinformatics | en_US |
uk.degree-program.cs | Geografie | cs_CZ |
uk.degree-program.en | Geography | en_US |
thesis.grade.cs | Velmi dobře | cs_CZ |
thesis.grade.en | Very good | en_US |
uk.abstract.cs | Filtrácia dát leteckého laserového skenovania Abstrakt Práca sa zaoberá automatizovanou klasifikáciou oblastí s rôznymi typmi povrchu v skalných mestách. Tieto oblasti vstupujú do filtrácie dát leteckého laserového skenovania, pričom každá z oblastí je filtrovaná s inými parametrami. Dôvodom pre takýto prístup je extrémna členitosť a hustá vegetácia typická pre skalné mestá, čo zapríčiňuje nedostatočnosť väčšiny bežných filtračných algoritmov aplikovaných s rovnakými parametrami na celé územie. Nami navrhnutá metodika spočíva v rozdelení záujmového územia do troch oblastí: oblasti budov, oblasti skál a oblasti vegetácie (resp. oblasti, v ktorej nie sú ani skaly, ani budovy). Každá z nich má pri následnej filtrácii špecifické parametre, ktoré reflektujú charakter danej oblasti. Kľúčové slová: letecké laserové skenovanie, DMR, skalné mestá, priestorovo podmienená filtrácia | cs_CZ |
uk.abstract.en | Filtration of Airborne Laserscanning Data Abstract The diploma thesis deals with automatized area classification with different surfaces in rocky towns. These areas are input into Airborne Laser-Scanning data filtration, where each of the areas is filtered with different parameters. The reason for this approach is the extreme height variety and dense vegetation typical for rocky towns, which causes the inadequacy of most common filtration algorithms applied with the same set of parameters for whole area. The methodic proposed by us consists of splitting the area of interest into three parts: Residential area, rocky area and area of vegetation (i.e. area that doesn't contain rocks or buildings). Each of these has special parameters applied during the following filtration, which reflect its characteristics. Key words: laser scanning, DTM, rocky towns, area based filtration | en_US |
uk.file-availability | V | |
uk.publication.place | Praha | cs_CZ |
uk.grantor | Univerzita Karlova, Přírodovědecká fakulta, Katedra aplikované geoinformatiky a kartografie | cs_CZ |
thesis.grade.code | 2 | |