dc.contributor.advisor | Hovorka, Jan | |
dc.creator | Shamratova, Kseniia | |
dc.date.accessioned | 2018-10-08T10:12:15Z | |
dc.date.available | 2018-10-08T10:12:15Z | |
dc.date.issued | 2018 | |
dc.identifier.uri | http://hdl.handle.net/20.500.11956/102171 | |
dc.description.abstract | This bachelor thesis deals with the issue of bioaerosol, properties of airborne fungal spores, describes their significance, concentration, methods of spreading and influence on human health. This work provides information about sampling and detection methods of bioaeerosol. Was proved the suitability of using of the first step of the high volume cascade impactor (Hi-Vol) BGI-900 to collect biaerosol samples for subsequent scanning electron microscope (SEM) analysis. Using the optimized method, bioaerosol samples were isolated from the polyurethane foam, which is the impact substrate of the impactor. Bioaerosol samples were taken from 3 locations in the Czech Republic: Prague, Březno, Láz. During the SEM analysis of 15 bioaerosol samples, 605 SEM images were taken, on 340 of them were identified fungal spores. The smallest number of spores were found in Prague. Approximately the same amount of fungal spores was found in Březno and Láz. Fungal spores were identified into 9 genus, 1 family, and 1 species. The percentage of deformed spores in Prague was 48%, in Březno 23%, in Láz 25%. The greatest variability of spores was at the Březno and Láz localities. The most common fungal genus was the Cladosporium genus. No positive or negative correlation was observed between the number of fungi and the... | en_US |
dc.description.abstract | Tato bakalařská práce řeší problematiku bioaerosolu, vlástnosti spor hub rozptylených ve vzduchu, popisuje jejich význam, koncentraci, způsoby šíření a vliv na zdraví člověka. Daná práce poskytuje informace o metodách odběru a detekce bioaerosolu. Byla prokázana vhodnost výužití prvního stupně vysokoobjemového kaskádního impaktoru (Hi-Vol) BGI-900 k odběru biaerosolu pro následnou analýzu pomocí skenovacího elektronového mikroskopu (SEM). Pomocí optimalizované metody vzorky bioaerosolu byly izolovány z polyuretanové pěny, což je impakční substrat impaktora. Vzorky bioaerosolu byly odebrány ze 3 lokalit v ČR: Praha, Březno, Láz. Během SEM analýzy pro 15 vzorků bioaerosolu bylo vytvořeno 605 SEM snímků, na 340 z nich byly identifikovány spor hub. Nejméně spor hub bylo nalezeno v Praze. Na lokalitách Březno a Láz bylo objeveno přibližně stejné množství spor. Spory hub se podařilo identifikovat do 9 rodů, 1 čeledí a 1 druha. Procento deformovaných spor v Praze činil 48%, v Březnu 23 %, v Lázu 25%. Největší variabilita spor hub byla na lokalitách Březno a Láz. Nejčastěji se vyskytujícím rodem hub byl rod Cladosporium. Nebyla pozorována ani positivní, ani negativní korelace mezi počtem spor hub a navážkou bioaerosolu. Ve vzorcích zimního odběru z Prahy byl nalezen bioaerosol, kdy zevrubná mikroskopická... | cs_CZ |
dc.language | Čeština | cs_CZ |
dc.language.iso | cs_CZ | |
dc.publisher | Univerzita Karlova, Přírodovědecká fakulta | cs_CZ |
dc.subject | fungal spores | en_US |
dc.subject | bioaerosol | en_US |
dc.subject | cascade impactor | en_US |
dc.subject | SEM | en_US |
dc.subject | spory hub | cs_CZ |
dc.subject | bioaerosol | cs_CZ |
dc.subject | kaskádní impaktor | cs_CZ |
dc.subject | SEM | cs_CZ |
dc.title | Kvalitativní a kvantitativní analýza spor hub nebo jejich částí ve velikostně rozlišeném aerosolu | cs_CZ |
dc.type | bakalářská práce | cs_CZ |
dcterms.created | 2018 | |
dcterms.dateAccepted | 2018-09-04 | |
dc.description.department | Ústav pro životní prostředí | cs_CZ |
dc.description.department | Institute for Environmental Studies | en_US |
dc.description.faculty | Faculty of Science | en_US |
dc.description.faculty | Přírodovědecká fakulta | cs_CZ |
dc.identifier.repId | 186284 | |
dc.title.translated | Charakterisation of fungal aerosol in size segregated aerosol | en_US |
dc.contributor.referee | Kozáková, Jana | |
thesis.degree.name | Bc. | |
thesis.degree.level | bakalářské | cs_CZ |
thesis.degree.discipline | Environmental Protection | en_US |
thesis.degree.discipline | Ochrana životního prostředí | cs_CZ |
thesis.degree.program | Ekologie a ochrana prostředí | cs_CZ |
thesis.degree.program | Ecology and Environmental Protection | en_US |
uk.thesis.type | bakalářská práce | cs_CZ |
uk.taxonomy.organization-cs | Přírodovědecká fakulta::Ústav pro životní prostředí | cs_CZ |
uk.taxonomy.organization-en | Faculty of Science::Institute for Environmental Studies | en_US |
uk.faculty-name.cs | Přírodovědecká fakulta | cs_CZ |
uk.faculty-name.en | Faculty of Science | en_US |
uk.faculty-abbr.cs | PřF | cs_CZ |
uk.degree-discipline.cs | Ochrana životního prostředí | cs_CZ |
uk.degree-discipline.en | Environmental Protection | en_US |
uk.degree-program.cs | Ekologie a ochrana prostředí | cs_CZ |
uk.degree-program.en | Ecology and Environmental Protection | en_US |
thesis.grade.cs | Dobře | cs_CZ |
thesis.grade.en | Good | en_US |
uk.abstract.cs | Tato bakalařská práce řeší problematiku bioaerosolu, vlástnosti spor hub rozptylených ve vzduchu, popisuje jejich význam, koncentraci, způsoby šíření a vliv na zdraví člověka. Daná práce poskytuje informace o metodách odběru a detekce bioaerosolu. Byla prokázana vhodnost výužití prvního stupně vysokoobjemového kaskádního impaktoru (Hi-Vol) BGI-900 k odběru biaerosolu pro následnou analýzu pomocí skenovacího elektronového mikroskopu (SEM). Pomocí optimalizované metody vzorky bioaerosolu byly izolovány z polyuretanové pěny, což je impakční substrat impaktora. Vzorky bioaerosolu byly odebrány ze 3 lokalit v ČR: Praha, Březno, Láz. Během SEM analýzy pro 15 vzorků bioaerosolu bylo vytvořeno 605 SEM snímků, na 340 z nich byly identifikovány spor hub. Nejméně spor hub bylo nalezeno v Praze. Na lokalitách Březno a Láz bylo objeveno přibližně stejné množství spor. Spory hub se podařilo identifikovat do 9 rodů, 1 čeledí a 1 druha. Procento deformovaných spor v Praze činil 48%, v Březnu 23 %, v Lázu 25%. Největší variabilita spor hub byla na lokalitách Březno a Láz. Nejčastěji se vyskytujícím rodem hub byl rod Cladosporium. Nebyla pozorována ani positivní, ani negativní korelace mezi počtem spor hub a navážkou bioaerosolu. Ve vzorcích zimního odběru z Prahy byl nalezen bioaerosol, kdy zevrubná mikroskopická... | cs_CZ |
uk.abstract.en | This bachelor thesis deals with the issue of bioaerosol, properties of airborne fungal spores, describes their significance, concentration, methods of spreading and influence on human health. This work provides information about sampling and detection methods of bioaeerosol. Was proved the suitability of using of the first step of the high volume cascade impactor (Hi-Vol) BGI-900 to collect biaerosol samples for subsequent scanning electron microscope (SEM) analysis. Using the optimized method, bioaerosol samples were isolated from the polyurethane foam, which is the impact substrate of the impactor. Bioaerosol samples were taken from 3 locations in the Czech Republic: Prague, Březno, Láz. During the SEM analysis of 15 bioaerosol samples, 605 SEM images were taken, on 340 of them were identified fungal spores. The smallest number of spores were found in Prague. Approximately the same amount of fungal spores was found in Březno and Láz. Fungal spores were identified into 9 genus, 1 family, and 1 species. The percentage of deformed spores in Prague was 48%, in Březno 23%, in Láz 25%. The greatest variability of spores was at the Březno and Láz localities. The most common fungal genus was the Cladosporium genus. No positive or negative correlation was observed between the number of fungi and the... | en_US |
uk.file-availability | V | |
uk.publication.place | Praha | cs_CZ |
uk.grantor | Univerzita Karlova, Přírodovědecká fakulta, Ústav pro životní prostředí | cs_CZ |
thesis.grade.code | 3 | |